linux-kernel - [PATCH v2] ARM: dts: AM43XX: Remove min and max voltage values for dcdc3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1496395441-29526-1-git-send-email-j-keerthy@ti.com>
Date:   Fri, 2 Jun 2017 14:54:01 +0530
From:   Keerthy <j-keerthy@...com>
To:     <tony@...mide.com>
CC:     <j-keerthy@...com>, <robh+dt@...nel.org>,
        <linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <t-kristo@...com>
Subject: [PATCH v2] ARM: dts: AM43XX: Remove min and max voltage values for dcdc3

dcdc3 supplies to DDR on AM43x series. When we set both
min and max values to the same value. The regulator framework
sets that particular voltage. This is bad as we are changing
the ddr voltage when executing from ddr. Hence remove the min and
max values. The ddr supply voltage shall be set from bootloader
when not executing from ddr and not while executing from kernel.

The previous discussion can be found here:

http://www.spinics.net/lists/devicetree/msg56399.html

Signed-off-by: Keerthy <j-keerthy@...com>
---

Changes in v2:

  * Corrected $subject

 arch/arm/boot/dts/am437x-gp-evm.dts  | 2 --
 arch/arm/boot/dts/am437x-sk-evm.dts  | 2 --
 arch/arm/boot/dts/am43x-epos-evm.dts | 2 --
 3 files changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 397e98b..29a538e 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -549,8 +549,6 @@
 
 		dcdc3: regulator-dcdc3 {
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 			regulator-state-mem {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index a62e158..2c6bf06 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -451,8 +451,6 @@
 
 		dcdc3: regulator-dcdc3 {
 			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 			regulator-state-mem {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f6648ab..54f40f3 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -442,8 +442,6 @@
 
 		dcdc3: regulator-dcdc3 {
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
-- 
1.9.1