lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1496370600-31442-1-git-send-email-ran.wang_1@nxp.com>
Date:   Fri, 2 Jun 2017 10:30:00 +0800
From:   Ran Wang <ran.wang_1@....com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>
CC:     Shawn Guo <shawnguo@...nel.org>,
        Tang Yuantian <Yuantian.Tang@....com>,
        Horia Geantă <horia.geanta@....com>,
        Marc Zyngier <marc.zyngier@....com>,
        Mihai Bantea <mihai.bantea@....com>,
        Jia Hongtao <hongtao.jia@....com>,
        Scott Wood <oss@...error.net>, Liu Gang <Gang.Liu@....com>,
        York Sun <york.sun@....com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        "moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)" 
        <linux-arm-kernel@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>,
        Ran Wang <ran.wang_1@....com>
Subject: [PATCH] arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node

Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.

Signed-off-by: Ran Wang <ran.wang_1@....com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7e..9137280 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -567,6 +567,7 @@
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb@...0000 {
@@ -575,6 +576,7 @@
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb2: usb@...0000 {
@@ -583,6 +585,7 @@
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		sata: sata@...0000 {
-- 
2.1.0.27.g96db324

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ