[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1496418222-23483-1-git-send-email-pali.rohar@gmail.com>
Date: Fri, 2 Jun 2017 17:43:37 +0200
From: Pali Rohár <pali.rohar@...il.com>
To: Joern Engel <joern@...ybastard.org>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
Artem Bityutskiy <dedekind1@...il.com>
Cc: linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
Pali Rohár <pali.rohar@...il.com>
Subject: [PATCH 0/5] Extends block2mtd and ubi drivers
This patch series extends block2mtd and ubi drivers to better handle
read-only devices and allow to load UBI image from local file which was
created for nand device.
Tested for Nokia N900 with Maemo 5 rootfs ubifs image
(rootfs_RX-51_2009SE_21.2011.38-1_PR_MR0) which has erase size 128k,
write size 2k and nand subpage shift 2.
$ losetup -r /dev/loop0 rootfs_RX-51_2009SE_21.2011.38-1_PR_MR0.ubifs
$ echo -n /dev/loop0,131072,2048,2 > /sys/module/block2mtd/parameters/block2mtd
$ ubiattach -p /dev/mtd0
$ mount /dev/ubi0_0 /mnt/ubi -t ubifs
...
$ umount /dev/ubi0_0
$ ubidetach -p /dev/mtd0
$ echo -n del=/dev/loop0 > /sys/module/block2mtd/parameters/block2mtd
$ losetup -d /dev/loop0
Pali Rohár (5):
mtd: block2mtd: Check for valid user supplied erase size
mtd: block2mtd: Add support for specifying MTD write size and subpage
shift
mtd: block2mtd: Fallback to read-only mode
mtd: block2mtd: Add support for deleting block2mtd mapping
ubi: Allow to use read-only UBI volume with not enough PEBs
drivers/mtd/devices/block2mtd.c | 129 ++++++++++++++++++++++++++++++---------
drivers/mtd/ubi/vtbl.c | 14 +++--
2 files changed, 110 insertions(+), 33 deletions(-)
--
1.7.9.5
Powered by blists - more mailing lists