lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20170605021326.GA18669@dragon>
Date:   Mon, 5 Jun 2017 10:13:27 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Oleksij Rempel <o.rempel@...gutronix.de>
Cc:     linux@...pel-orivat.de, Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, Russell King <linux@...linux.org.uk>,
        linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        kernel@...gutronix.de, Fabio Estevam <fabio.estevam@....com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v1 5/5] ARM: dts: imx6: RIoTboard provide Standby to
 PowerOff option

On Mon, Jun 05, 2017 at 09:50:29AM +0800, Shawn Guo wrote:
> On Mon, May 29, 2017 at 07:09:24PM +0200, Oleksij Rempel wrote:
> > This board, as well as some other boards with i.MX6 and a PMIC, uses a
> > "MPIC_STBY_REQ" line to notify the PMIC about a state change.
> > The PMIC is programmed for a specific state change before triggering the
> > line.
> > In this case, PMIC_STBY_REQ can be used for Stand by, Sleep
> > and Power off modes.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > Cc: kernel@...gutronix.de
> > Cc: linux-arm-kernel@...ts.infradead.org
> > Cc: Shawn Guo <shawnguo@...nel.org>
> > Cc: Fabio Estevam <fabio.estevam@....com>
> > Cc: Rob Herring <robh+dt@...nel.org>
> > Cc: Mark Rutland <mark.rutland@....com>
> > Cc: Russell King <linux@...linux.org.uk>
> > Cc: devicetree@...r.kernel.org
> > Cc: linux-kernel@...r.kernel.org
> > ---
> >  arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
> > index 2cb72824e800..b5f25fe7b809 100644
> > --- a/arch/arm/boot/dts/imx6dl-riotboard.dts
> > +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
> > @@ -90,6 +90,10 @@
> >  	status = "okay";
> >  };
> >  
> > +&clks {
> > +	fsl,pmic_stby_poweroff;
> > +};
> > +
> >  &fec {
> >  	pinctrl-names = "default";
> >  	pinctrl-0 = <&pinctrl_enet>;
> > @@ -125,6 +129,7 @@
> >  		reg = <0x08>;
> >  		interrupt-parent = <&gpio5>;
> >  		interrupts = <16 8>;
> > +		fsl,pmic_stby_poweroff;
> 
> Is this property supported by upstream kernel?

Okay, just noticed that it's the last patch of series adding
fsl,pmic_stby_poweroff support.

Shawn

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ