linux-kernel - Re: [PATCH v5 07/23] mtd: nand: denali: do not propagate NAND_STATUS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170607153318.7e341dff@bbrezillon>
Date:   Wed, 7 Jun 2017 15:33:18 +0200
From:   Boris Brezillon <boris.brezillon@...e-electrons.com>
To:     Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc:     linux-mtd@...ts.infradead.org, Enrico Jorns <ejo@...gutronix.de>,
        Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
        Dinh Nguyen <dinguyen@...nel.org>,
        Marek Vasut <marek.vasut@...il.com>,
        David Woodhouse <dwmw2@...radead.org>,
        Masami Hiramatsu <mhiramat@...nel.org>,
        Chuanxiao Dong <chuanxiao.dong@...el.com>,
        Jassi Brar <jaswinder.singh@...aro.org>,
        Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
        linux-kernel@...r.kernel.org,
        Brian Norris <computersforpeace@...il.com>,
        Richard Weinberger <richard@....at>
Subject: Re: [PATCH v5 07/23] mtd: nand: denali: do not propagate
 NAND_STATUS_FAIL to waitfunc()

On Wed,  7 Jun 2017 20:52:16 +0900
Masahiro Yamada <yamada.masahiro@...ionext.com> wrote:

> Currently, the error handling of denali_write_page(_raw) is a bit
> complicated.  If the program command fails, NAND_STATUS_FAIL is set
> to the driver internal denali->status, then read out later by
> denali_waitfunc().
> 
> We can avoid it by exploiting the nand_write_page() implementation.
> If chip->ecc.write_page(_raw) returns negative code (i.e. -EIO), it
> errors out immediately.  This gives the same result as returning
> NAND_STATUS_FAIL from chip->waitfunc.  In either way, -EIO is
> returned to the upper MTD layer.

Actually, this is how it's supposed to work now (when they set
the NAND_ECC_CUSTOM_PAGE_ACCESS flag, drivers are expected to wait for
the program operation to finish and return -EIO if it failed), so you're
all good ;-).

> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
> ---
> 
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
>   - Newly added
> 
>  drivers/mtd/nand/denali.c | 12 ++++--------
>  drivers/mtd/nand/denali.h |  1 -
>  2 files changed, 4 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
> index 1897fe238290..22acfc34b546 100644
> --- a/drivers/mtd/nand/denali.c
> +++ b/drivers/mtd/nand/denali.c
> @@ -1005,6 +1005,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
>  	size_t size = mtd->writesize + mtd->oobsize;
>  	uint32_t irq_status;
>  	uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;

As mentioned in my previous patch, I think you should wait for
INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL here.

> +	int ret = 0;
>  
>  	denali->page = page;
>  
> @@ -1038,13 +1039,13 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
>  	if (irq_status == 0) {
>  		dev_err(denali->dev, "timeout on write_page (type = %d)\n",
>  			raw_xfer);
> -		denali->status = NAND_STATUS_FAIL;
> +		ret = -EIO;
>  	}

	if (irq_status & INTR__PROGRAM_FAIL) {
		dev_err(denali->dev, "page program failed (type = %d)\n",
  			raw_xfer);
		ret = -EIO;
	}
>  
>  	denali_enable_dma(denali, false);
>  	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  /* NAND core entry points */
> @@ -1196,12 +1197,7 @@ static void denali_select_chip(struct mtd_info *mtd, int chip)
>  
>  static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
>  {
> -	struct denali_nand_info *denali = mtd_to_denali(mtd);
> -	int status = denali->status;
> -
> -	denali->status = 0;
> -
> -	return status;
> +	return 0;
>  }
>  
>  static int denali_erase(struct mtd_info *mtd, int page)
> diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
> index a06ed741b550..352d8328b94a 100644
> --- a/drivers/mtd/nand/denali.h
> +++ b/drivers/mtd/nand/denali.h
> @@ -323,7 +323,6 @@ struct nand_buf {
>  struct denali_nand_info {
>  	struct nand_chip nand;
>  	int flash_bank; /* currently selected chip */
> -	int status;
>  	int platform;
>  	struct nand_buf buf;
>  	struct device *dev;