| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 8 Jun 2017 14:16:02 +0900
From: Jiada Wang <jiada_wang@...tor.com>
To: <broonie@...nel.org>, <robh+dt@...nel.org>, <mark.rutland@....com>,
<shawnguo@...nel.org>, <kernel@...gutronix.de>,
<fabio.estevam@....com>
CC: <linux-spi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH linux-next v4 3/4] ARM: dts: imx: change compatibility for SPI controllers on imx53 later soc
for SPI controllers on imx53 and later SoCs, there is HW issue when
work in slave mode, as new device type 'IMX53_ECSPI' has been added
for these SPI controllers which is compatible with 'fsl,imx53-ecspi'.
This patch updates DTS to make imx53 later SPI controller only be
compatibile with 'fsl,imx53-ecspi'.
Signed-off-by: Jiada Wang <jiada_wang@...tor.com>
---
arch/arm/boot/dts/imx53.dtsi | 4 ++--
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sl.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sx.dtsi | 8 ++++----
arch/arm/boot/dts/imx6ul.dtsi | 8 ++++----
6 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 2e516f4..9eeafb9 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -243,7 +243,7 @@
ecspi1: ecspi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
@@ -662,7 +662,7 @@
ecspi2: ecspi@...ac000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx53-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index dd33849..b214442 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -90,7 +90,7 @@
ecspi5: ecspi@...18000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6Q_CLK_ECSPI5>,
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f325411..ac19c58 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -266,7 +266,7 @@
ecspi1: ecspi@...08000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
@@ -280,7 +280,7 @@
ecspi2: ecspi@...0c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
@@ -294,7 +294,7 @@
ecspi3: ecspi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
@@ -308,7 +308,7 @@
ecspi4: ecspi@...14000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6q-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3243af4..d9b9053 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -168,7 +168,7 @@
ecspi1: ecspi@...08000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
@@ -180,7 +180,7 @@
ecspi2: ecspi@...0c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
@@ -192,7 +192,7 @@
ecspi3: ecspi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
@@ -204,7 +204,7 @@
ecspi4: ecspi@...14000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index f16b9df..149ef79 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -251,7 +251,7 @@
ecspi1: ecspi@...08000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI1>,
@@ -263,7 +263,7 @@
ecspi2: ecspi@...0c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI2>,
@@ -275,7 +275,7 @@
ecspi3: ecspi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI3>,
@@ -287,7 +287,7 @@
ecspi4: ecspi@...14000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_ECSPI4>,
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 6da2b77..7226061 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -204,7 +204,7 @@
ecspi1: ecspi@...08000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI1>,
@@ -216,7 +216,7 @@
ecspi2: ecspi@...0c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI2>,
@@ -228,7 +228,7 @@
ecspi3: ecspi@...10000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI3>,
@@ -240,7 +240,7 @@
ecspi4: ecspi@...14000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx53-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ECSPI4>,
--
2.9.3
Powered by blists - more mailing lists