linux-kernel - [PATCH v2 1/2] dt-bindings: Update documentation for stingray SATA phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1496921499-2808-2-git-send-email-srinath.mannam@broadcom.com>
Date:   Thu,  8 Jun 2017 17:01:38 +0530
From:   Srinath Mannam <srinath.mannam@...adcom.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     Tejun Heo <tj@...nel.org>, Florian Fainelli <f.fainelli@...il.com>,
        Ray Jui <ray.jui@...adcom.com>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH v2 1/2] dt-bindings: Update documentation for stingray SATA phy

Update BRCM SATA phy dt-binding documentation for stingray.

Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
 Documentation/devicetree/bindings/phy/brcm-sata-phy.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index 6ccce09..97977cd 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -7,12 +7,13 @@ Required properties:
      "brcm,iproc-ns2-sata-phy"
      "brcm,iproc-nsp-sata-phy"
      "brcm,phy-sata3"
+     "brcm,iproc-sr-sata-phy"
 - address-cells: should be 1
 - size-cells: should be 0
 - reg: register ranges for the PHY PCB interface
 - reg-names: should be "phy" and "phy-ctrl"
      The "phy-ctrl" registers are only required for
-     "brcm,iproc-ns2-sata-phy".
+     "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
 
 Sub-nodes:
   Each port's PHY should be represented as a sub-node.
@@ -23,8 +24,8 @@ Sub-nodes required properties:
 
 Sub-nodes optional properties:
 - brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-     This property is not applicable for "brcm,iproc-ns2-sata-phy" and
-     "brcm,iproc-nsp-sata-phy".
+     This property is not applicable for "brcm,iproc-ns2-sata-phy",
+     "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
 
 Example:
 	sata-phy@...58100 {
-- 
2.7.4