| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1497281848-12995-2-git-send-email-aisheng.dong@nxp.com>
Date: Mon, 12 Jun 2017 23:37:22 +0800
From: Dong Aisheng <aisheng.dong@....com>
To: <linux-serial@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<gregkh@...uxfoundation.org>, <jslaby@...e.com>,
<fugang.duan@....com>, <stefan@...er.ch>, <Mingkai.Hu@....com>,
<yangbo.lu@....com>, <nikita.yoush@...entembedded.com>,
<andy.shevchenko@...il.com>, <dongas86@...il.com>,
Dong Aisheng <aisheng.dong@....com>
Subject: [PATCH V3 1/7] tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
This is used to dynamically check the SoC specific lpuart properies.
Currently only the iotype is added, it functions the same as before.
With this, new chips with different iotype will be more easily added.
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jslaby@...e.com>
Cc: Stefan Agner <stefan@...er.ch>
Cc: Mingkai Hu <Mingkai.Hu@....com>
Cc: Yangbo Lu <yangbo.lu@....com>
Cc: Fugang Duan <fugang.duan@....com>
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
---
ChangeLog:
v2->v3:
* use standard iotype flags instead of private is_32 member
v1->v2:
* make all soc_data const
---
drivers/tty/serial/fsl_lpuart.c | 48 ++++++++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 15df1ba7..4daabc6 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -236,7 +236,6 @@ struct lpuart_port {
struct clk *clk;
unsigned int txfifo_size;
unsigned int rxfifo_size;
- bool lpuart32;
bool lpuart_dma_tx_use;
bool lpuart_dma_rx_use;
@@ -258,13 +257,22 @@ struct lpuart_port {
wait_queue_head_t dma_wait;
};
+struct lpuart_soc_data {
+ char iotype;
+};
+
+static const struct lpuart_soc_data vf_data = {
+ .iotype = UPIO_MEM,
+};
+
+static const struct lpuart_soc_data ls_data = {
+ .iotype = UPIO_MEM32BE,
+
+};
+
static const struct of_device_id lpuart_dt_ids[] = {
- {
- .compatible = "fsl,vf610-lpuart",
- },
- {
- .compatible = "fsl,ls1021a-lpuart",
- },
+ { .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
+ { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -593,7 +601,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
spin_lock_irqsave(&sport->port.lock, flags);
if (sport->port.x_char) {
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA);
else
writeb(sport->port.x_char, sport->port.membase + UARTDR);
@@ -601,14 +609,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart32_stop_tx(&sport->port);
else
lpuart_stop_tx(&sport->port);
goto out;
}
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart32_transmit_buffer(sport);
else
lpuart_transmit_buffer(sport);
@@ -1881,12 +1889,12 @@ static int __init lpuart_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart32_console_get_options(sport, &baud, &parity, &bits);
else
lpuart_console_get_options(sport, &baud, &parity, &bits);
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart32_setup_watermark(sport);
else
lpuart_setup_watermark(sport);
@@ -1971,6 +1979,9 @@ static struct uart_driver lpuart_reg = {
static int lpuart_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id = of_match_device(lpuart_dt_ids,
+ &pdev->dev);
+ const struct lpuart_soc_data *sdata = of_id->data;
struct device_node *np = pdev->dev.of_node;
struct lpuart_port *sport;
struct resource *res;
@@ -1988,8 +1999,6 @@ static int lpuart_probe(struct platform_device *pdev)
return ret;
}
sport->port.line = ret;
- sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sport->port.membase))
@@ -1998,15 +2007,14 @@ static int lpuart_probe(struct platform_device *pdev)
sport->port.mapbase = res->start;
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
- sport->port.iotype = UPIO_MEM;
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "cannot obtain irq\n");
return ret;
}
sport->port.irq = ret;
-
- if (sport->lpuart32)
+ sport->port.iotype = sdata->iotype;
+ if (sport->port.iotype & UPIO_MEM32BE)
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
@@ -2033,7 +2041,7 @@ static int lpuart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &sport->port);
- if (sport->lpuart32)
+ if (sport->port.iotype & UPIO_MEM32BE)
lpuart_reg.cons = LPUART32_CONSOLE;
else
lpuart_reg.cons = LPUART_CONSOLE;
@@ -2086,7 +2094,7 @@ static int lpuart_suspend(struct device *dev)
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
- if (sport->lpuart32) {
+ if (sport->port.iotype & UPIO_MEM32BE) {
/* disable Rx/Tx and interrupts */
temp = lpuart32_read(sport->port.membase + UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
@@ -2137,7 +2145,7 @@ static int lpuart_resume(struct device *dev)
if (sport->port.suspended && !sport->port.irq_wake)
clk_prepare_enable(sport->clk);
- if (sport->lpuart32) {
+ if (sport->port.iotype & UPIO_MEM32BE) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(sport->port.membase + UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
--
2.7.4
Powered by blists - more mailing lists