This patch introduces new module parameter, dev, which takes a string representing the device that the external synth is connected to, e.g. ttyS0, ttyUSB0 etc. This is then used to communicate with the synth. That way, speakup can support more than ttyS*. As of this patch, it only supports ttyS*, ttyUSB* and selected synths for lp*. dev parameter is only available for tty-migrated synths. Users will either use dev or ser as both serve same purpose. This patch maintains backward compatility by allowing ser to be specified. When both are specified, whichever is non-default, i.e. not ttyS0, is used. If both are non-default then dev is used. Signed-off-by: Okash Khawaja Reviewed-by: Samuel Thibault --- drivers/staging/speakup/speakup_acntsa.c | 3 +++ drivers/staging/speakup/speakup_apollo.c | 3 +++ drivers/staging/speakup/speakup_audptr.c | 3 +++ drivers/staging/speakup/speakup_bns.c | 3 +++ drivers/staging/speakup/speakup_decext.c | 3 +++ drivers/staging/speakup/speakup_dectlk.c | 3 +++ drivers/staging/speakup/speakup_dummy.c | 3 +++ drivers/staging/speakup/speakup_ltlk.c | 3 +++ drivers/staging/speakup/speakup_spkout.c | 3 +++ drivers/staging/speakup/speakup_txprt.c | 3 +++ drivers/staging/speakup/spk_ttyio.c | 15 +++++++-------- 11 files changed, 37 insertions(+), 8 deletions(-) --- a/drivers/staging/speakup/speakup_acntsa.c +++ b/drivers/staging/speakup/speakup_acntsa.c @@ -96,6 +96,7 @@ static struct spk_synth synth_acntsa = { .trigger = 50, .jiffies = 30, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -135,9 +136,11 @@ static int synth_probe(struct spk_synth } module_param_named(ser, synth_acntsa.ser, int, 0444); +module_param_named(dev, synth_acntsa.dev, charp, S_IRUGO); module_param_named(start, synth_acntsa.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_acntsa); --- a/drivers/staging/speakup/speakup_apollo.c +++ b/drivers/staging/speakup/speakup_apollo.c @@ -105,6 +105,7 @@ static struct spk_synth synth_apollo = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -199,9 +200,11 @@ static void do_catch_up(struct spk_synth } module_param_named(ser, synth_apollo.ser, int, 0444); +module_param_named(dev, synth_apollo.dev, charp, S_IRUGO); module_param_named(start, synth_apollo.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_apollo); --- a/drivers/staging/speakup/speakup_audptr.c +++ b/drivers/staging/speakup/speakup_audptr.c @@ -100,6 +100,7 @@ static struct spk_synth synth_audptr = { .trigger = 50, .jiffies = 30, .full = 18000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -162,9 +163,11 @@ static int synth_probe(struct spk_synth } module_param_named(ser, synth_audptr.ser, int, 0444); +module_param_named(dev, synth_audptr.dev, charp, S_IRUGO); module_param_named(start, synth_audptr.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_audptr); --- a/drivers/staging/speakup/speakup_bns.c +++ b/drivers/staging/speakup/speakup_bns.c @@ -93,6 +93,7 @@ static struct spk_synth synth_bns = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -119,9 +120,11 @@ static struct spk_synth synth_bns = { }; module_param_named(ser, synth_bns.ser, int, 0444); +module_param_named(dev, synth_bns.dev, charp, S_IRUGO); module_param_named(start, synth_bns.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_bns); --- a/drivers/staging/speakup/speakup_decext.c +++ b/drivers/staging/speakup/speakup_decext.c @@ -120,6 +120,7 @@ static struct spk_synth synth_decext = { .jiffies = 50, .full = 40000, .flags = SF_DEC, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -226,9 +227,11 @@ static void synth_flush(struct spk_synth } module_param_named(ser, synth_decext.ser, int, 0444); +module_param_named(dev, synth_decext.dev, charp, S_IRUGO); module_param_named(start, synth_decext.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_decext); --- a/drivers/staging/speakup/speakup_dectlk.c +++ b/drivers/staging/speakup/speakup_dectlk.c @@ -124,6 +124,7 @@ static struct spk_synth synth_dectlk = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -298,9 +299,11 @@ static void synth_flush(struct spk_synth } module_param_named(ser, synth_dectlk.ser, int, 0444); +module_param_named(dev, synth_dectlk.dev, charp, S_IRUGO); module_param_named(start, synth_dectlk.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_dectlk); --- a/drivers/staging/speakup/speakup_dummy.c +++ b/drivers/staging/speakup/speakup_dummy.c @@ -95,6 +95,7 @@ static struct spk_synth synth_dummy = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -121,9 +122,11 @@ static struct spk_synth synth_dummy = { }; module_param_named(ser, synth_dummy.ser, int, 0444); +module_param_named(dev, synth_dummy.dev, charp, S_IRUGO); module_param_named(start, synth_dummy.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_dummy); --- a/drivers/staging/speakup/speakup_ltlk.c +++ b/drivers/staging/speakup/speakup_ltlk.c @@ -107,6 +107,7 @@ static struct spk_synth synth_ltlk = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -166,9 +167,11 @@ static int synth_probe(struct spk_synth } module_param_named(ser, synth_ltlk.ser, int, 0444); +module_param_named(dev, synth_ltlk.dev, charp, S_IRUGO); module_param_named(start, synth_ltlk.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_ltlk); --- a/drivers/staging/speakup/speakup_spkout.c +++ b/drivers/staging/speakup/speakup_spkout.c @@ -98,6 +98,7 @@ static struct spk_synth synth_spkout = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -130,9 +131,11 @@ static void synth_flush(struct spk_synth } module_param_named(ser, synth_spkout.ser, int, 0444); +module_param_named(dev, synth_spkout.dev, charp, S_IRUGO); module_param_named(start, synth_spkout.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_spkout); --- a/drivers/staging/speakup/speakup_txprt.c +++ b/drivers/staging/speakup/speakup_txprt.c @@ -92,6 +92,7 @@ static struct spk_synth synth_txprt = { .trigger = 50, .jiffies = 50, .full = 40000, + .dev = SYNTH_DEFAULT_DEV, .startup = SYNTH_START, .checkval = SYNTH_CHECK, .vars = vars, @@ -118,9 +119,11 @@ static struct spk_synth synth_txprt = { }; module_param_named(ser, synth_txprt.ser, int, 0444); +module_param_named(dev, synth_txprt.dev, charp, S_IRUGO); module_param_named(start, synth_txprt.startup, short, 0444); MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based)."); +MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer."); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); module_spk_synth(synth_txprt); --- a/drivers/staging/speakup/spk_ttyio.c +++ b/drivers/staging/speakup/spk_ttyio.c @@ -209,11 +209,12 @@ static inline void get_termios(struct tt up_read(&tty->termios_rwsem); } -static int spk_ttyio_initialise_ldisc(int ser) +static int spk_ttyio_initialise_ldisc(struct spk_synth *synth) { int ret = 0; struct tty_struct *tty; struct ktermios tmp_termios; + dev_t dev; ret = tty_register_ldisc(N_SPEAKUP, &spk_ttyio_ldisc_ops); if (ret) { @@ -221,13 +222,11 @@ static int spk_ttyio_initialise_ldisc(in return ret; } - if (ser < 0 || ser > (255 - 64)) { - pr_err("speakup: Invalid ser param. Must be between 0 and 191 inclusive.\n"); - return -EINVAL; - } + ret = get_dev_to_use(synth, &dev); + if (ret) + return ret; - /* TODO: support more than ttyS* */ - tty = tty_open_by_driver(MKDEV(4, (ser + 64)), NULL, NULL); + tty = tty_open_by_driver(dev, NULL, NULL); if (IS_ERR(tty)) return PTR_ERR(tty); @@ -338,7 +337,7 @@ static void spk_ttyio_flush_buffer(void) int spk_ttyio_synth_probe(struct spk_synth *synth) { - int rv = spk_ttyio_initialise_ldisc(synth->ser); + int rv = spk_ttyio_initialise_ldisc(synth); if (rv) return rv;