[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170614082338.15673-11-guodong.xu@linaro.org>
Date: Wed, 14 Jun 2017 16:23:27 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: robh+dt@...nel.org, mark.rutland@....com, xuwei5@...ilicon.com,
catalin.marinas@....com, will.deacon@....com,
wangkefeng.wang@...wei.com, xuejiancheng@...ilicon.com,
peter.griffin@...aro.org, puck.chen@...ilicon.com,
lee.jones@...aro.org, ulf.hansson@...aro.org, bhelgaas@...gle.com,
arnd@...db.de
Cc: zhangfei.gao@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mmc@...r.kernel.org, linux-pci@...r.kernel.org,
Chen Jun <chenjun14@...wei.com>,
John Stultz <john.stultz@...aro.org>,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v3 10/21] arm64: dts: hi3660: add power key dts node
From: Chen Jun <chenjun14@...wei.com>
We use gpio_034 as power key on hikey960, and set gpio with pull-up
state, when key press the voltage on the gpio will come to lower, and
power key event will be reported.
Signed-off-by: Chen Jun <chenjun14@...wei.com>
Signed-off-by: John Stultz <john.stultz@...aro.org>
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index c25fff9..7aac35b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -10,6 +10,8 @@
#include "hi3660.dtsi"
#include "hikey960-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "HiKey960";
@@ -34,6 +36,19 @@
/* rewrite this at bootloader */
reg = <0x0 0x0 0x0 0x0>;
};
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+ power {
+ wakeup-source;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ };
+ };
};
&i2c0 {
--
2.10.2
Powered by blists - more mailing lists