| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170614082338.15673-8-guodong.xu@linaro.org>
Date: Wed, 14 Jun 2017 16:23:24 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: robh+dt@...nel.org, mark.rutland@....com, xuwei5@...ilicon.com,
catalin.marinas@....com, will.deacon@....com,
wangkefeng.wang@...wei.com, xuejiancheng@...ilicon.com,
peter.griffin@...aro.org, puck.chen@...ilicon.com,
lee.jones@...aro.org, ulf.hansson@...aro.org, bhelgaas@...gle.com,
arnd@...db.de
Cc: zhangfei.gao@...aro.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mmc@...r.kernel.org, linux-pci@...r.kernel.org,
Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v3 07/21] arm64: dts: hi3660: Add uarts nodes
From: Chen Feng <puck.chen@...ilicon.com>
Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.
On HiKey960:
- UART6 is used as default console, and is wired out through low speed
expansion connector.
- UART3 has RTS/CTS hardware handshake, and is wired out through low
speed expansion connector.
- UART5 is not used in commercial launched boards. So disable it.
- UART4 is connected to Bluetooth, WL1837.
Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
Reviewed-by: Zhangfei Gao <zhangfei.gao@...ilicon.com>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 20 +++++-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 74 +++++++++++++++++++++++
2 files changed, 91 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 1a4d6c5..0a3f2e0 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -15,11 +15,17 @@
compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
aliases {
- serial5 = &uart5; /* console UART */
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
};
chosen {
- stdout-path = "serial5:115200n8";
+ stdout-path = "serial6:115200n8";
};
memory@0 {
@@ -51,6 +57,14 @@
status = "okay";
};
-&uart5 {
+&uart3 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&uart6 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b03be4d..7a90c92 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -242,6 +242,66 @@
status = "disabled";
};
+ uart0: serial@...02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ status = "disabled";
+ };
+
+ uart1: serial@...00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+ <&crg_ctrl HI3660_CLK_GATE_UART1>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ status = "disabled";
+ };
+
+ uart2: serial@...03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ status = "disabled";
+ };
+
+ uart3: serial@...74000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xffd74000 0x0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ status = "disabled";
+ };
+
+ uart4: serial@...01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+ <&crg_ctrl HI3660_CLK_GATE_UART4>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ status = "disabled";
+ };
+
uart5: serial@...05000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfdf05000 0x0 0x1000>;
@@ -249,6 +309,20 @@
clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
<&crg_ctrl HI3660_CLK_GATE_UART5>;
clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+ status = "disabled";
+ };
+
+ uart6: serial@...32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_UART6>,
+ <&crg_ctrl HI3660_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
status = "disabled";
};
--
2.10.2
Powered by blists - more mailing lists