linux-kernel - [PATCH v11 0/6] i2c: designware: add I2C SLAVE support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1497025304.git.lolivei@synopsys.com>
Date:   Wed, 14 Jun 2017 11:43:20 +0100
From:   Luis Oliveira <Luis.Oliveira@...opsys.com>
To:     wsa@...-dreams.de, robh+dt@...nel.org, mark.rutland@....com,
        jarkko.nikula@...ux.intel.com, andriy.shevchenko@...ux.intel.com,
        mika.westerberg@...ux.intel.com, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Luis.Oliveira@...opsys.com, Ramiro.Oliveira@...opsys.com,
        Joao.Pinto@...opsys.com, CARLOS.PALMINHA@...opsys.com
Subject: [PATCH v11 0/6] i2c: designware: add I2C SLAVE support

The purpose of this patchset is to enable Linux to be a I2C slave by 
enabling the slave functionality in the designware I2C controller and at
the same time it does some cleaning of the existing code.

The patch 1 is for cleaning and commentary fix.
The patch 2 refactors the original i2c-designware-core and extracts all
master functions to a i2c-designware-master source file as suggested by
Andy Shevchenko when I first submited the update. The patch 3 then
separates the MASTER flow from the common flow.
The patch 4 introduces the SLAVE necessary definitions to the 
i2c-designware library and adds a how-to-use example to the designware.txt
in device tree bindings.
The patch 5 adds the necessary functions to give the ability to be a SLAVE
to the controller and for that changes also had to be made in the 
Makefile and Kconfig.
The patch 6 enables the SLAVE mode to be detected by the platform module.

The functionality was tested using the hardware independent slave-eeprom
driver based on top of i2c/for-next. The tree I used can be found here:

https://git.kernel.org/cgit/linux/kernel/git/wsa/linux.git/log/?h=i2c/for-next

Luis Oliveira (6):
  i2c: designware: Cleaning and comment style fixes.
  i2c: designware: refactoring of the i2c-designware
  i2c: designware: MASTER mode as separated driver
  i2c: designware: introducing I2C_SLAVE definitions
  i2c: designware: add SLAVE mode functions
  i2c: designware: enable SLAVE in platform module

 .../devicetree/bindings/i2c/i2c-designware.txt     |  16 +-
 drivers/i2c/busses/Kconfig                         |  14 +-
 drivers/i2c/busses/Makefile                        |   4 +
 drivers/i2c/busses/i2c-designware-common.c         | 281 +++++++++++++
 drivers/i2c/busses/i2c-designware-core.h           | 180 +++++++-
 ...c-designware-core.c => i2c-designware-master.c} | 467 +++------------------
 drivers/i2c/busses/i2c-designware-pcidrv.c         |   9 +-
 drivers/i2c/busses/i2c-designware-platdrv.c        | 117 ++++--
 drivers/i2c/busses/i2c-designware-slave.c          | 398 ++++++++++++++++++
 9 files changed, 1033 insertions(+), 453 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-designware-common.c
 rename drivers/i2c/busses/{i2c-designware-core.c => i2c-designware-master.c} (60%)
 create mode 100644 drivers/i2c/busses/i2c-designware-slave.c

-- 
2.13.0