linux-kernel - [PATCH v11 6/6] i2c: designware: enable SLAVE in platform module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <e7b28fca3e419c3a9177acb99236597197124c0f.1497025304.git.lolivei@synopsys.com>
Date:   Wed, 14 Jun 2017 11:43:26 +0100
From:   Luis Oliveira <Luis.Oliveira@...opsys.com>
To:     wsa@...-dreams.de, robh+dt@...nel.org, mark.rutland@....com,
        jarkko.nikula@...ux.intel.com, andriy.shevchenko@...ux.intel.com,
        mika.westerberg@...ux.intel.com, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Luis.Oliveira@...opsys.com, Ramiro.Oliveira@...opsys.com,
        Joao.Pinto@...opsys.com, CARLOS.PALMINHA@...opsys.com
Subject: [PATCH v11 6/6] i2c: designware: enable SLAVE in platform module

- Slave mode selected in platform module if the support is detected in
  the DT.

Signed-off-by: Luis Oliveira <lolivei@...opsys.com>
---
v10-v11
- no changes

 drivers/i2c/busses/i2c-designware-core.h    |  2 ++
 drivers/i2c/busses/i2c-designware-platdrv.c | 41 +++++++++++++++++++++++++----
 2 files changed, 38 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 64a39a983410..7bfbcc62f6c5 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -228,6 +228,7 @@
  * @disable: function to disable the controller
  * @disable_int: function to disable all interrupts
  * @init: function to initialize the I2C hardware
+ * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
  *
  * HCNT and LCNT parameters can be used if the platform knows more accurate
  * values than the one computed based only on the input clock frequency.
@@ -282,6 +283,7 @@ struct dw_i2c_dev {
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
+	int			mode;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1f38c807be5f..2ea6d0d25a01 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,5 +1,5 @@
 /*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
@@ -174,9 +174,13 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 
 static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
+	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
 	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 			  DW_IC_CON_RESTART_EN;
 
+	dev->mode = DW_IC_MASTER;
+
 	switch (dev->clk_freq) {
 	case 100000:
 		dev->master_cfg |= DW_IC_CON_SPEED_STD;
@@ -189,6 +193,28 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 	}
 }
 
+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+			 DW_IC_CON_SPEED_FAST;
+
+	dev->mode = DW_IC_SLAVE;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
 static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
 {
 	if (IS_ERR(i_dev->clk))
@@ -302,9 +328,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (ret)
 		goto exit_reset;
 
-	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
-	i2c_dw_configure_master(dev);
+	if (i2c_detect_slave_mode(&pdev->dev))
+		i2c_dw_configure_slave(dev);
+	else
+		i2c_dw_configure_master(dev);
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -333,7 +360,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
-	ret = i2c_dw_probe(dev);
+	if (dev->mode == DW_IC_SLAVE)
+		ret = i2c_dw_probe_slave(dev);
+	else
+		ret = i2c_dw_probe(dev);
+
 	if (ret)
 		goto exit_probe;
 
-- 
2.13.0