[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1497443984-12371-20-git-send-email-daniel.lezcano@linaro.org>
Date: Wed, 14 Jun 2017 14:39:41 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: tglx@...utronix.de
Cc: linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
linux-arm-kernel@...ts.infradead.org (moderated list:ATMEL Timer
Count...)
Subject: [PATCH 20/23] clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
On sama5d2, power to the core may be cut while entering suspend mode. It is
necessary to save and restore the TCB registers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
drivers/clocksource/tcb_clksrc.c | 51 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index d4ca996..828729c 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -9,6 +9,7 @@
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
#include <linux/atmel_tc.h>
@@ -40,6 +41,14 @@
*/
static void __iomem *tcaddr;
+static struct
+{
+ u32 cmr;
+ u32 imr;
+ u32 rc;
+ bool clken;
+} tcb_cache[3];
+static u32 bmr_cache;
static u64 tc_get_cycles(struct clocksource *cs)
{
@@ -61,12 +70,54 @@ static u64 tc_get_cycles32(struct clocksource *cs)
return __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
}
+void tc_clksrc_suspend(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+ tcb_cache[i].cmr = readl(tcaddr + ATMEL_TC_REG(i, CMR));
+ tcb_cache[i].imr = readl(tcaddr + ATMEL_TC_REG(i, IMR));
+ tcb_cache[i].rc = readl(tcaddr + ATMEL_TC_REG(i, RC));
+ tcb_cache[i].clken = !!(readl(tcaddr + ATMEL_TC_REG(i, SR)) &
+ ATMEL_TC_CLKSTA);
+ }
+
+ bmr_cache = readl(tcaddr + ATMEL_TC_BMR);
+}
+
+void tc_clksrc_resume(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) {
+ /* Restore registers for the channel, RA and RB are not used */
+ writel(tcb_cache[i].cmr, tcaddr + ATMEL_TC_REG(i, CMR));
+ writel(tcb_cache[i].rc, tcaddr + ATMEL_TC_REG(i, RC));
+ writel(0, tcaddr + ATMEL_TC_REG(i, RA));
+ writel(0, tcaddr + ATMEL_TC_REG(i, RB));
+ /* Disable all the interrupts */
+ writel(0xff, tcaddr + ATMEL_TC_REG(i, IDR));
+ /* Reenable interrupts that were enabled before suspending */
+ writel(tcb_cache[i].imr, tcaddr + ATMEL_TC_REG(i, IER));
+ /* Start the clock if it was used */
+ if (tcb_cache[i].clken)
+ writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(i, CCR));
+ }
+
+ /* Dual channel, chain channels */
+ writel(bmr_cache, tcaddr + ATMEL_TC_BMR);
+ /* Finally, trigger all the channels*/
+ writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
static struct clocksource clksrc = {
.name = "tcb_clksrc",
.rating = 200,
.read = tc_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .suspend = tc_clksrc_suspend,
+ .resume = tc_clksrc_resume,
};
#ifdef CONFIG_GENERIC_CLOCKEVENTS
--
2.7.4
Powered by blists - more mailing lists