[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170615030417.14059-21-guodong.xu@linaro.org>
Date: Thu, 15 Jun 2017 11:04:17 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
xuwei5@...ilicon.com, catalin.marinas@....com, will.deacon@....com,
lgirdwood@...il.com, broonie@...nel.org, khilman@...libre.com,
arnd@...db.de, gregory.clement@...e-electrons.com,
horms+renesas@...ge.net.au, olof@...om.net,
thomas.petazzoni@...e-electrons.com, yamada.masahiro@...ionext.com,
riku.voipio@...aro.org, treding@...dia.com, krzk@...nel.org,
eric@...olt.net, damm+renesas@...nsource.se,
ard.biesheuvel@...aro.org, linus.walleij@...aro.org,
geert+renesas@...der.be
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, hw.wangxiaoyin@...ilicon.com,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v4 20/20] arm64: dts: hi3660-hikey960: add nodes for WiFi
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module.
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 33 +++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index cec0b60..6609b0f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -145,6 +145,20 @@
};
};
};
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* GPIO_051_WIFI_EN */
+ gpio = <&gpio6 3 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&i2c0 {
@@ -208,3 +222,22 @@
vqmmc-supply = <&ldo9>;
status = "okay";
};
+
+&dwmmc2 { /* WIFI */
+ broken-cd;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
+ ti,non-removable;
+ non-removable;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ status = "ok";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>; /* sdio func num */
+ /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+ interrupt-parent = <&gpio22>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+};
--
2.10.2
Powered by blists - more mailing lists