[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1497521010-8429-1-git-send-email-hoegeun.kwon@samsung.com>
Date: Thu, 15 Jun 2017 19:03:26 +0900
From: Hoegeun Kwon <hoegeun.kwon@...sung.com>
To: thierry.reding@...il.com, airlied@...ux.ie, robh+dt@...nel.org,
mark.rutland@....com, catalin.marinas@....com, will.deacon@....com,
kgene@...nel.org, krzk@...nel.org
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
javier@....samsung.com, a.hajda@...sung.com,
Hoegeun Kwon <hoegeun.kwon@...sung.com>
Subject: [PATCH v2 0/4] Add support for the s6e63j0x03 panel on Rinato board
Hi all,
The purpose of this patch is add support for s6e63j0x03 AMOLED panel
on the rinato board(Samsung Galaxy Gear 2).
Changes for V2:
- Added the interface info in binding document.
- Added Reviewed-by: Andrzej Hajda <a.hajda@...sung.com> (1/3 patch).
- Added Acked-by: Rob Herring <robh@...nel.org> (1/3 patch).
- Fixed the tristate of config from video mode to command mode.
- Fixed the reset gpios from active high to low from rinato dts.
- Fixed a lot of things in panel driver, reflect Andrzej's review.
Best regards,
Hoegeun
Hoegeun Kwon (4):
dt-bindings: Add support for samsung s6e63j0x03 panel binding
drm/panel: Add support for s6e63j0x03 panel driver
ARM: dts: exynos: Fix the active of reset gpios from rinato dts
ARM: dts: exynos: Remove the display-timing and delay from rinato dts
.../bindings/display/panel/samsung,s6e63j0x03.txt | 24 ++
arch/arm/boot/dts/exynos3250-rinato.dts | 24 +-
drivers/gpu/drm/panel/Kconfig | 7 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 476 +++++++++++++++++++++
5 files changed, 509 insertions(+), 23 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
--
1.9.1
Powered by blists - more mailing lists