[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1497533097-12052-3-git-send-email-eugen.hristev@microchip.com>
Date: Thu, 15 Jun 2017 16:24:55 +0300
From: Eugen Hristev <eugen.hristev@...rochip.com>
To: <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>,
<linux-iio@...r.kernel.org>, <lars@...afoo.de>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<ludovic.desroches@...rochip.com>, <jic23@...nel.org>,
<robh@...nel.org>
CC: <eugen.hristev@...rochip.com>
Subject: [PATCH v5 2/4] Documentation: dt: iio: at91-sama5d2_adc: add hw trigger edge binding
Add property for the edge type of the hardware trigger pin ADTRG
Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
Acked-by: Rob Herring <robh@...nel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
---
Changes in v4:
- Modified bindings to be similar with interrupts
Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 3223684..552e7a8 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -11,6 +11,11 @@ Required properties:
- atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
- atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
- atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+ - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware
+ trigger pin. When the specific edge type is detected, the conversion will
+ start. Possible values are rising, falling, or both.
+ This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
+ IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
Example:
@@ -25,4 +30,5 @@ adc: adc@...30000 {
atmel,startup-time-ms = <4>;
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
}
--
2.7.4
Powered by blists - more mailing lists