linux-kernel - Re: [PATCH v4 1/2] arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1497548366.4975.3.camel@mtkswgap22>
Date:   Fri, 16 Jun 2017 01:39:26 +0800
From:   Sean Wang <sean.wang@...iatek.com>
To:     Matthias Brugger <matthias.bgg@...il.com>
CC:     <robh+dt@...nel.org>, <mark.rutland@....com>,
        <devicetree@...r.kernel.org>, <john@...ozen.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 1/2] arm64: dts: mt7622: add basic nodes to the
 mt7622.dtsi file

On Thu, 2017-06-15 at 18:04 +0200, Matthias Brugger wrote:
> 
> On 14/06/17 18:11, sean.wang@...iatek.com wrote:
> > From: Sean Wang <sean.wang@...iatek.com>
> > 
> > add basic nodes into the mt7622.dtsi for the system
> > bring-up which includes ARM CPU, GIC, timer, MediaTek
> > UART, SYSIRQ and one reserved memory region for ATF.
> > 
> > Signed-off-by: Sean Wang <sean.wang@...iatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt7622.dtsi | 104 +++++++++++++++++++++++++++++++
> >   1 file changed, 104 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > new file mode 100644
> > index 0000000..239b9b3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> > @@ -0,0 +1,104 @@
> > +/*
> > + * Copyright (c) 2017 MediaTek Inc.
> > + * Author: Ming Huang <ming.huang@...iatek.com>
> > + *	   Sean Wang <sean.wang@...iatek.com>
> > + *
> > + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > +	compatible = "mediatek,mt7622";
> > +	interrupt-parent = <&sysirq>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	cpus {
> > +		#address-cells = <2>;
> > +		#size-cells = <0>;
> > +
> > +		cpu0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53", "arm,armv8";
> > +			reg = <0x0 0x0>;
> > +			enable-method = "psci";
> > +			clock-frequency = <1300000000>;
> > +		};
> > +
> > +		cpu1: cpu@1 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53", "arm,armv8";
> > +			reg = <0x0 0x1>;
> > +			enable-method = "psci";
> > +			clock-frequency = <1300000000>;
> > +		};
> > +	};
> > +
> > +	uart_clk: dummy25m {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <25000000>;
> > +	};
> > +
> > +	psci {
> > +		compatible  = "arm,psci-0.2";
> > +		method      = "smc";
> > +	};
> > +
> > +	reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> > +		secmon_reserved: secmon@...00000 {
> > +			reg = <0 0x43000000 0 0x30000>;
> > +			no-map;
> > +		};
> > +	};
> > +
> > +	timer {
> > +		compatible = "arm,armv8-timer";
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> > +			      IRQ_TYPE_LEVEL_HIGH)>,
> > +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> > +			      IRQ_TYPE_LEVEL_HIGH)>,
> > +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> > +			      IRQ_TYPE_LEVEL_HIGH)>,
> > +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> > +			      IRQ_TYPE_LEVEL_HIGH)>;
> > +	};
> > +
> > +	sysirq: interrupt-controller@...00620 {
> > +		compatible = "mediatek,mt7622-sysirq",
> > +			     "mediatek,mt6577-sysirq";
> > +		interrupt-controller;
> > +		#interrupt-cells = <3>;
> > +		interrupt-parent = <&gic>;
> > +		reg = <0 0x10200620 0 0x20>;
> > +	};
> > +
> > +	gic: interrupt-controller@...00000 {
> > +		compatible = "arm,gic-400";
> > +		interrupt-controller;
> > +		#interrupt-cells = <3>;
> > +		interrupt-parent = <&gic>;
> > +		reg = <0 0x10310000 0 0x1000>,
> > +		      <0 0x10320000 0 0x1000>,
> > +		      <0 0x10340000 0 0x2000>,
> > +		      <0 0x10360000 0 0x2000>;
> > +	};
> > +
> > +	uart0: serial@...02000 {
> > +		compatible = "mediatek,mt7622-uart",
> > +			     "mediatek,mt6577-uart";
> > +		reg = <0 0x11002000 0 0x400>;
> > +		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&uart_clk>, <&uart_clk>;
> 
> Please add a dummy clock node with the correct frequency, as done in 
> other chips as well.
> 
> Thanks,
> Matthias
> 

Okay, the uart clock should be 50MHz, and bus clock should be 280MHz
from AXI bus

I will update in the next version .
	
	Sean 

> > +		clock-names = "baud", "bus";
> > +		status = "disabled";
> > +	};
> > +};
> >