[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170615030417.14059-13-guodong.xu@linaro.org>
Date: Thu, 15 Jun 2017 11:04:09 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
xuwei5@...ilicon.com, catalin.marinas@....com, will.deacon@....com,
lgirdwood@...il.com, broonie@...nel.org, khilman@...libre.com,
arnd@...db.de, gregory.clement@...e-electrons.com,
horms+renesas@...ge.net.au, olof@...om.net,
thomas.petazzoni@...e-electrons.com, yamada.masahiro@...ionext.com,
riku.voipio@...aro.org, treding@...dia.com, krzk@...nel.org,
eric@...olt.net, damm+renesas@...nsource.se,
ard.biesheuvel@...aro.org, linus.walleij@...aro.org,
geert+renesas@...der.be
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, hw.wangxiaoyin@...ilicon.com,
Guodong Xu <guodong.xu@...aro.org>
Subject: [PATCH v4 12/20] arm64: dts: hi3660: add spi device nodes
From: Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>
Add spi2 and spi3 device nodes for hi3660, and enable them for hikey960.
On HiKey960:
- SPI2 is wired out through low speed expansion connector.
- SPI3 is wired out through high speed expansion connector.
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@...ilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 12 +++++++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 30 +++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 9ecf6c6..ca448f0 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -142,3 +142,15 @@
label = "LS-UART1";
status = "okay";
};
+
+&spi2 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&spi3 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3b2a3a7..a6b91f1 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -713,5 +713,35 @@
clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
clock-names = "apb_pclk";
};
+
+ spi2: spi@...68000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xffd68000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio27 2 0>;
+ status = "disabled";
+ };
+
+ spi3: spi@...b3000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xff3b3000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pmx_func>;
+ num-cs = <1>;
+ cs-gpios = <&gpio18 5 0>;
+ status = "disabled";
+ };
};
};
--
2.10.2
Powered by blists - more mailing lists