linux-kernel - [PATCH NET] net/hns:bugfix of ethtool -t phy self

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1497605091-94725-1-git-send-email-linyunsheng@huawei.com>
Date:   Fri, 16 Jun 2017 17:24:51 +0800
From:   Lin Yun Sheng <linyunsheng@...wei.com>
To:     <davem@...emloft.net>
CC:     <huangdaode@...ilicon.com>, <xuwei5@...ilicon.com>,
        <liguozhu@...ilicon.com>, <Yisen.Zhuang@...wei.com>,
        <gabriele.paoloni@...wei.com>, <john.garry@...wei.com>,
        <linuxarm@...wei.com>, <yisen.zhuang@...wei.com>,
        <salil.mehta@...wei.com>, <lipeng321@...wei.com>,
        <yankejian@...wei.com>, <tremyfr@...il.com>,
        <xieqianqian@...wei.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH NET] net/hns:bugfix of ethtool -t phy self_test

This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.

Signed-off-by: Lin Yun Sheng <linyunsheng@...wei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index b8fab14..e95795b 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
 
 		/* Force 1000M Link, Default is 0x0200 */
 		phy_write(phy_dev, 7, 0x20C);
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
 
-		/* Enable PHY loop-back */
+		/* Powerup Fiber */
+		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+		val = phy_read(phy_dev, COPPER_CONTROL_REG);
+		val &= ~PHY_POWER_DOWN;
+		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
+		/* Enable Phy Loopback */
+		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
 		val = phy_read(phy_dev, COPPER_CONTROL_REG);
 		val |= PHY_LOOP_BACK;
 		val &= ~PHY_POWER_DOWN;
@@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
 		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
 		phy_write(phy_dev, 1, 0x400);
 		phy_write(phy_dev, 7, 0x200);
+
+		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+		val = phy_read(phy_dev, COPPER_CONTROL_REG);
+		val |= PHY_POWER_DOWN;
+		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
 		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
 		phy_write(phy_dev, 9, 0xF00);
 
-- 
1.9.1