linux-kernel - [PATCH 3.10 070/268] scsi: storvsc: properly set residual data length on errors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1497897167-14556-71-git-send-email-w@1wt.eu>
Date:   Mon, 19 Jun 2017 20:29:29 +0200
From:   Willy Tarreau <w@....eu>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org,
        linux@...ck-us.net
Cc:     Long Li <longli@...rosoft.com>,
        "K . Y . Srinivasan" <kys@...rosoft.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Willy Tarreau <w@....eu>
Subject: [PATCH 3.10 070/268] scsi: storvsc: properly set residual data length on errors

From: Long Li <longli@...rosoft.com>

commit 40630f462824ee24bc00d692865c86c3828094e0 upstream.

On I/O errors, the Windows driver doesn't set data_transfer_length
on error conditions other than SRB_STATUS_DATA_OVERRUN.
In these cases we need to set data_transfer_length to 0,
indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN,
data_transfer_length is set by the Windows driver to the actual data transferred.

Reported-by: Shiva Krishna <Shiva.Krishna@...blestorage.com>
Signed-off-by: Long Li <longli@...rosoft.com>
Reviewed-by: K. Y. Srinivasan <kys@...rosoft.com>
Signed-off-by: K. Y. Srinivasan <kys@...rosoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Willy Tarreau <w@....eu>
---
 drivers/scsi/storvsc_drv.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 2729023..58d898c 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -204,6 +204,7 @@ enum storvsc_request_type {
 #define SRB_STATUS_SUCCESS	0x01
 #define SRB_STATUS_ABORTED	0x02
 #define SRB_STATUS_ERROR	0x04
+#define SRB_STATUS_DATA_OVERRUN	0x12
 
 /*
  * This is the end of Protocol specific defines.
@@ -866,6 +867,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
 	struct stor_mem_pools *memp = scmnd->device->hostdata;
+	u32 data_transfer_length;
 	struct Scsi_Host *host;
 	struct storvsc_device *stor_dev;
 	struct hv_device *dev = host_dev->dev;
@@ -874,6 +876,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
+	data_transfer_length = vm_srb->data_transfer_length;
 	if (cmd_request->bounce_sgl_count) {
 		if (vm_srb->data_in == READ_TYPE)
 			copy_from_bounce_buffer(scsi_sglist(scmnd),
@@ -892,13 +895,20 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 			scsi_print_sense_hdr("storvsc", &sense_hdr);
 	}
 
-	if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
+	if (vm_srb->srb_status != SRB_STATUS_SUCCESS) {
 		storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc,
 					 sense_hdr.ascq);
+		/*
+		 * The Windows driver set data_transfer_length on
+		 * SRB_STATUS_DATA_OVERRUN. On other errors, this value
+		 * is untouched.  In these cases we set it to 0.
+		 */
+		if (vm_srb->srb_status != SRB_STATUS_DATA_OVERRUN)
+			data_transfer_length = 0;
+	}
 
 	scsi_set_resid(scmnd,
-		cmd_request->data_buffer.len -
-		vm_srb->data_transfer_length);
+		cmd_request->data_buffer.len - data_transfer_length);
 
 	scsi_done_fn = scmnd->scsi_done;
 
-- 
2.8.0.rc2.1.gbe9624a