[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1497904618-27010-3-git-send-email-thor.thayer@linux.intel.com>
Date: Mon, 19 Jun 2017 15:36:57 -0500
From: thor.thayer@...ux.intel.com
To: wsa@...-dreams.de, robh+dt@...nel.org, mark.rutland@....com,
thor.thayer@...ux.intel.com
Cc: davem@...emloft.net, gregkh@...uxfoundation.org,
mchehab@...nel.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCHv4 2/3] dt-bindings: i2c: Add Altera I2C Controller
From: Thor Thayer <thor.thayer@...ux.intel.com>
Add the documentation to support the Altera synthesizable
logic I2C Controller in FPGA.
Signed-off-by: Thor Thayer <thor.thayer@...ux.intel.com>
Acked-by: Rob Herring <robh@...nel.org>
---
v2 Change the subject to identify dt-bindings
Add synthesizable logic to description.
Change compatible string to "altr,softip-i2c"
Make description of clock phandle singular since 1 clock.
Remove altr, from fifo-size
Specify fifo-size is in bytes.
v3 Add version to compatible string "altr,softip-i2c-v1.0"
Add for use in FPGA in description.
v4 No Change - Add Acked-by
---
.../devicetree/bindings/i2c/i2c-altera.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
new file mode 100644
index 0000000..767664f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
@@ -0,0 +1,39 @@
+* Altera I2C Controller
+* This is Altera's synthesizable logic block I2C Controller for use
+* in Altera's FPGAs.
+
+Required properties :
+ - compatible : should be "altr,softip-i2c-v1.0"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks : phandle to input clock.
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Recommended properties :
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties :
+ - fifo-size : Size of the RX and TX FIFOs in bytes.
+ - Child nodes conforming to i2c bus binding
+
+Example :
+
+ i2c@...080000 {
+ compatible = "altr,softip-i2c-v1.0";
+ reg = <0x00000001 0x00080000 0x00000040>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 43 4>;
+ clocks = <&clk_0>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-size = <4>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+ };
+
--
2.7.4
Powered by blists - more mailing lists