[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170619050245.2632-5-o.rempel@pengutronix.de>
Date: Mon, 19 Jun 2017 07:02:43 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Morton <akpm@...ux-foundation.org>,
devicetree@...r.kernel.org, Fabio Estevam <fabio.estevam@....com>,
kernel@...gutronix.de, Liam Girdwood <lgirdwood@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@...linux.org.uk>,
Shawn Guo <shawnguo@...nel.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Leonard Crestez <leonard.crestez@....com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>
Subject: [PATCH v5 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property
Document the new optional "fsl,pmic-stby-poweroff" property.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
Acked-by: Rob Herring <robh@...nel.org>
---
Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..197f1a52e960 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
- reg: I2C slave address
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+ power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+ Use this option if the SoC should be powered off by external power
+ management IC (PMIC) on PMIC_STBY_REQ signal.
+ As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
Required child node:
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Please refer to below doc
--
2.11.0
Powered by blists - more mailing lists