lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1497942745-8607-2-git-send-email-dwoo08.lee@samsung.com>
Date:   Tue, 20 Jun 2017 16:12:23 +0900
From:   Dongwoo Lee <dwoo08.lee@...sung.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@...ts.infradead.org (moderated list:ARM64 PORT
        (AARCH64 ARCHITECTURE)),
        linux-samsung-soc@...r.kernel.org (moderated list:ARM/SAMSUNG EXYNOS
        ARM ARCHITECTURES), linux-kernel@...r.kernel.org (open list)
Cc:     cw00.choi@...sung.com, andi.shyti@...sung.com,
        Dongwoo Lee <dwoo08.lee@...sung.com>
Subject: [PATCH 1/2] arm64: dts: exynos: Fix wrong label for USB 3.0
 controller node

Exynos5433 has two usb 3.0 controllers: usbhost and usbdrd. usbhost
is host-only controller whereas usbdrd supports both peripheral and
host mode. "drd" means dual-role device, so usbhost cannot be labeled
with the name contains "drd". Howerver, the label usbdrd_dwc3_0 was
used for usbhost's dwc3 node. It seems it obviously fault because TM2
and TM2E doesn't use usbhost but dr_mode property is assigned to it.

This patch assigns the proper label for two dwc3 nodes, and apply
changes to the related reference.

Signed-off-by: Dongwoo Lee <dwoo08.lee@...sung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 +-
 arch/arm64/boot/dts/exynos/exynos5433.dtsi            | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 804a270..477c3bc 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1202,7 +1202,7 @@
 	status = "okay";
 };
 
-&usbdrd_dwc3_0 {
+&usbdrd_dwc3 {
 	dr_mode = "otg";
 };
 
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 727f36a..7fe994b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
 			ranges;
 			status = "disabled";
 
-			dwc3@...00000 {
+			usbdrd_dwc3: dwc3@...00000 {
 				compatible = "snps,dwc3";
 				reg = <0x15400000 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
 			ranges;
 			status = "disabled";
 
-			usbdrd_dwc3_0: dwc3@...00000 {
+			usbhost_dwc3: dwc3@...00000 {
 				compatible = "snps,dwc3";
 				reg = <0x15a00000 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ