lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1497949857-1852-1-git-send-email-varada@codeaurora.org>
Date:   Tue, 20 Jun 2017 14:40:42 +0530
From:   Varadarajan Narayanan <varada@...eaurora.org>
To:     broonie@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        andy.gross@...aro.org, david.brown@...aro.org,
        linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-soc@...r.kernel.org
Cc:     Varadarajan Narayanan <varada@...eaurora.org>
Subject: [PATCH v3 00/15] spi: qup: Fixes and add support for >64k transfers

v3:
	Fix git bisect-ability issues in
		spi: qup: Add completion structures for DMA
		spi: qup: Add completion timeout
		spi: qup: Place the QUP in run mode before DMA
		spi: qup: Fix transaction done signaling

v2:
	Incorporate feedback from Andy Gross, Sricharan, Stanimir Varbanov

	Modified the QUP-v1 dma completion sequence to QUP-v2 as per feedback.

	Removed code that used controller->xfer to identify extra interrupts,
	since with the fixes done to handle i/o completion we don't see
	extra interrupts.

v1:
	This series fixes some existing issues in the code for both
	interrupt and dma mode. Patches 1 - 11 are the fixes.
	Random failures/timeout are observed without these fixes.
	Also, the current driver does not support block transfers > 64K
	and the driver quietly fails. Patches 12 - 18 add support for this
	in both interrupt and dma mode.

	The entire series has been tested on ipq4019 with
	SPI-NOR flash for block sizes > 64k.

Varadarajan Narayanan (15):
  spi: qup: Enable chip select support
  spi: qup: Setup DMA mode correctly
  spi: qup: Add completion structures for DMA
  spi: qup: Add completion timeout
  spi: qup: Place the QUP in run mode before DMA
  spi: qup: Fix error handling in spi_qup_prep_sg
  spi: qup: Fix transaction done signaling
  spi: qup: Do block sized read/write in block mode
  spi: qup: refactor spi_qup_io_config into two functions
  spi: qup: call io_config in mode specific function
  spi: qup: allow block mode to generate multiple transactions
  spi: qup: refactor spi_qup_prep_sg
  spi: qup: allow multiple DMA transactions per spi xfer
  spi: qup: Ensure done detection
  spi: qup: support for qup v1 dma

 .../devicetree/bindings/spi/qcom,spi-qup.txt       |   6 +
 drivers/spi/spi-qup.c                              | 630 ++++++++++++++-------
 2 files changed, 441 insertions(+), 195 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ