lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <89eb3329-29f3-fdb1-db9a-cbd1ed27c8a6@axentia.se>
Date:   Tue, 20 Jun 2017 11:55:01 +0200
From:   Peter Rosin <peda@...ntia.se>
To:     linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        Daniel Vetter <daniel.vetter@...el.com>
Subject: Re: [RFC PATCH v2 1/3] drm: atmel-hlcdc: add support for 8-bit color
 lookup table mode

On 2017-06-20 11:40, Daniel Vetter wrote:
> On Sat, Jun 17, 2017 at 07:48:02PM +0200, Peter Rosin wrote:
>> All layers of all supported chips support this, the only variable is the
>> base address of the lookup table in the register map.
>>
>> Signed-off-by: Peter Rosin <peda@...ntia.se>
> 
> As Boris said, pls use the new color manager stuff for atomic drivers, and
> then use the helper to implement the legacy kms LUT support on top of it,
> it's drm_atomic_helper_legacy_gamma_set().
> -Daniel

Hmm, I don't see how this comment applies to this patch? Isn't this
patch good as is, because I thought I already did wire this up with
the drm_atomic_helper_legacy_gamma_set helper as requested?
(sure, v3 has a register offset tweak, but that's just a detail)

I totally agree that 2/3 and 3/3 are ugly and I am working on that, but
if 1/3 is also not in the right direction I'd like to know ASAP. Thanks!

Cheers,
peda

> 
>> ---
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c  |  5 +++++
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c    | 13 +++++++++++
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h    | 16 ++++++++++++++
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 29 +++++++++++++++++++++++++
>>  4 files changed, 63 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> index 5348985..694adcc 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
>> @@ -429,6 +429,8 @@ static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
>>  	.atomic_destroy_state = atmel_hlcdc_crtc_destroy_state,
>>  	.enable_vblank = atmel_hlcdc_crtc_enable_vblank,
>>  	.disable_vblank = atmel_hlcdc_crtc_disable_vblank,
>> +	.set_property = drm_atomic_helper_crtc_set_property,
>> +	.gamma_set = drm_atomic_helper_legacy_gamma_set,
>>  };
>>  
>>  int atmel_hlcdc_crtc_create(struct drm_device *dev)
>> @@ -484,6 +486,9 @@ int atmel_hlcdc_crtc_create(struct drm_device *dev)
>>  	drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
>>  	drm_crtc_vblank_reset(&crtc->base);
>>  
>> +	drm_mode_crtc_set_gamma_size(&crtc->base, ATMEL_HLCDC_CLUT_SIZE);
>> +	drm_crtc_enable_color_mgmt(&crtc->base, 0, false, ATMEL_HLCDC_CLUT_SIZE);
>> +
>>  	dc->crtc = &crtc->base;
>>  
>>  	return 0;
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> index 30dbffd..4f6ef07 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> @@ -42,6 +42,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = {
>>  			.default_color = 3,
>>  			.general_config = 4,
>>  		},
>> +		.clut_offset = 0x400,
>>  	},
>>  };
>>  
>> @@ -73,6 +74,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
>>  			.disc_pos = 5,
>>  			.disc_size = 6,
>>  		},
>> +		.clut_offset = 0x400,
>>  	},
>>  	{
>>  		.name = "overlay1",
>> @@ -91,6 +93,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
>>  			.chroma_key_mask = 8,
>>  			.general_config = 9,
>>  		},
>> +		.clut_offset = 0x800,
>>  	},
>>  	{
>>  		.name = "high-end-overlay",
>> @@ -112,6 +115,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
>>  			.scaler_config = 13,
>>  			.csc = 14,
>>  		},
>> +		.clut_offset = 0x1000,
>>  	},
>>  	{
>>  		.name = "cursor",
>> @@ -131,6 +135,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
>>  			.chroma_key_mask = 8,
>>  			.general_config = 9,
>>  		},
>> +		.clut_offset = 0x1400,
>>  	},
>>  };
>>  
>> @@ -162,6 +167,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
>>  			.disc_pos = 5,
>>  			.disc_size = 6,
>>  		},
>> +		.clut_offset = 0x600,
>>  	},
>>  	{
>>  		.name = "overlay1",
>> @@ -180,6 +186,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
>>  			.chroma_key_mask = 8,
>>  			.general_config = 9,
>>  		},
>> +		.clut_offset = 0xa00,
>>  	},
>>  	{
>>  		.name = "overlay2",
>> @@ -198,6 +205,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
>>  			.chroma_key_mask = 8,
>>  			.general_config = 9,
>>  		},
>> +		.clut_offset = 0xe00,
>>  	},
>>  	{
>>  		.name = "high-end-overlay",
>> @@ -223,6 +231,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
>>  			},
>>  			.csc = 14,
>>  		},
>> +		.clut_offset = 0x1200,
>>  	},
>>  	{
>>  		.name = "cursor",
>> @@ -244,6 +253,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
>>  			.general_config = 9,
>>  			.scaler_config = 13,
>>  		},
>> +		.clut_offset = 0x1600,
>>  	},
>>  };
>>  
>> @@ -275,6 +285,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
>>  			.disc_pos = 5,
>>  			.disc_size = 6,
>>  		},
>> +		.clut_offset = 0x600,
>>  	},
>>  	{
>>  		.name = "overlay1",
>> @@ -293,6 +304,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
>>  			.chroma_key_mask = 8,
>>  			.general_config = 9,
>>  		},
>> +		.clut_offset = 0xa00,
>>  	},
>>  	{
>>  		.name = "overlay2",
>> @@ -336,6 +348,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
>>  			},
>>  			.csc = 14,
>>  		},
>> +		.clut_offset = 0x1200,
>>  	},
>>  };
>>  
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
>> index b0596a8..709f7b9 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
>> @@ -88,6 +88,11 @@
>>  #define ATMEL_HLCDC_YUV422SWP			BIT(17)
>>  #define ATMEL_HLCDC_DSCALEOPT			BIT(20)
>>  
>> +#define ATMEL_HLCDC_C1_MODE			ATMEL_HLCDC_CLUT_MODE(0)
>> +#define ATMEL_HLCDC_C2_MODE			ATMEL_HLCDC_CLUT_MODE(1)
>> +#define ATMEL_HLCDC_C4_MODE			ATMEL_HLCDC_CLUT_MODE(2)
>> +#define ATMEL_HLCDC_C8_MODE			ATMEL_HLCDC_CLUT_MODE(3)
>> +
>>  #define ATMEL_HLCDC_XRGB4444_MODE		ATMEL_HLCDC_RGB_MODE(0)
>>  #define ATMEL_HLCDC_ARGB4444_MODE		ATMEL_HLCDC_RGB_MODE(1)
>>  #define ATMEL_HLCDC_RGBA4444_MODE		ATMEL_HLCDC_RGB_MODE(2)
>> @@ -142,6 +147,8 @@
>>  #define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE	BIT(2)
>>  #define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN	BIT(3)
>>  
>> +#define ATMEL_HLCDC_CLUT_SIZE			256
>> +
>>  #define ATMEL_HLCDC_MAX_LAYERS			6
>>  
>>  /**
>> @@ -259,6 +266,7 @@ struct atmel_hlcdc_layer_desc {
>>  	int id;
>>  	int regs_offset;
>>  	int cfgs_offset;
>> +	int clut_offset;
>>  	struct atmel_hlcdc_formats *formats;
>>  	struct atmel_hlcdc_layer_cfg_layout layout;
>>  	int max_width;
>> @@ -414,6 +422,14 @@ static inline u32 atmel_hlcdc_layer_read_cfg(struct atmel_hlcdc_layer *layer,
>>  					  (cfgid * sizeof(u32)));
>>  }
>>  
>> +static inline void atmel_hlcdc_layer_write_clut(struct atmel_hlcdc_layer *layer,
>> +						unsigned int c, u32 val)
>> +{
>> +	atmel_hlcdc_layer_write_reg(layer,
>> +				    layer->desc->clut_offset + c * sizeof(u32),
>> +				    val);
>> +}
>> +
>>  static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
>>  				const struct atmel_hlcdc_layer_desc *desc,
>>  				struct regmap *regmap)
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> index 1124200..b5bd9b0 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>> @@ -83,6 +83,7 @@ drm_plane_state_to_atmel_hlcdc_plane_state(struct drm_plane_state *s)
>>  #define SUBPIXEL_MASK			0xffff
>>  
>>  static uint32_t rgb_formats[] = {
>> +	DRM_FORMAT_C8,
>>  	DRM_FORMAT_XRGB4444,
>>  	DRM_FORMAT_ARGB4444,
>>  	DRM_FORMAT_RGBA4444,
>> @@ -100,6 +101,7 @@ struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats = {
>>  };
>>  
>>  static uint32_t rgb_and_yuv_formats[] = {
>> +	DRM_FORMAT_C8,
>>  	DRM_FORMAT_XRGB4444,
>>  	DRM_FORMAT_ARGB4444,
>>  	DRM_FORMAT_RGBA4444,
>> @@ -128,6 +130,9 @@ struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats = {
>>  static int atmel_hlcdc_format_to_plane_mode(u32 format, u32 *mode)
>>  {
>>  	switch (format) {
>> +	case DRM_FORMAT_C8:
>> +		*mode = ATMEL_HLCDC_C8_MODE;
>> +		break;
>>  	case DRM_FORMAT_XRGB4444:
>>  		*mode = ATMEL_HLCDC_XRGB4444_MODE;
>>  		break;
>> @@ -424,6 +429,29 @@ static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
>>  				    ATMEL_HLCDC_LAYER_FORMAT_CFG, cfg);
>>  }
>>  
>> +static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane)
>> +{
>> +	struct drm_crtc *crtc = plane->base.crtc;
>> +	struct drm_color_lut *lut;
>> +	int idx;
>> +
>> +	if (!crtc || !crtc->state)
>> +		return;
>> +
>> +	if (!crtc->state->color_mgmt_changed || !crtc->state->gamma_lut)
>> +		return;
>> +
>> +	lut = (struct drm_color_lut *)crtc->state->gamma_lut->data;
>> +
>> +	for (idx = 0; idx < ATMEL_HLCDC_CLUT_SIZE; idx++, lut++) {
>> +		u32 val = ((lut->red << 8) & 0xff0000) |
>> +			(lut->green & 0xff00) |
>> +			(lut->blue >> 8);
>> +
>> +		atmel_hlcdc_layer_write_clut(&plane->layer, idx, val);
>> +	}
>> +}
>> +
>>  static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
>>  					struct atmel_hlcdc_plane_state *state)
>>  {
>> @@ -768,6 +796,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>>  	atmel_hlcdc_plane_update_pos_and_size(plane, state);
>>  	atmel_hlcdc_plane_update_general_settings(plane, state);
>>  	atmel_hlcdc_plane_update_format(plane, state);
>> +	atmel_hlcdc_plane_update_clut(plane);
>>  	atmel_hlcdc_plane_update_buffers(plane, state);
>>  	atmel_hlcdc_plane_update_disc_area(plane, state);
>>  
>> -- 
>> 2.1.4
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@...ts.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ