| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACRpkdYrsOB71gJjXeQn0Q8xBTEvYSeDnRpSGm4GQ0h-=Pk3=Q@mail.gmail.com>
Date: Tue, 20 Jun 2017 13:15:05 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: fenglinw@...eaurora.org,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ivan Ivanov <iivanov.xz@...il.com>
Cc: "linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@...r.kernel.org>,
collinsd@...cinc.com, aghayal@....qualcomm.com, wruan@...cinc.com,
kgunda@....qualcomm.com
Subject: Re: [PATCH V1 1/3] pinctrl: qcom: spmi-gpio: Add support for GPIO
LV/MV subtype
Bjrön and/or Ivan: please look at this.
Yours,
Linus Walleij
On Tue, Jun 13, 2017 at 8:16 AM, <fenglinw@...eaurora.org> wrote:
> From: Fenglin Wu <fenglinw@...eaurora.org>
>
> GPIO LV (low voltage)/MV (medium voltage) subtypes have different
> features and register mappings than 4CH/8CH subtypes. Add support
> for LV and MV subtypes.
>
> Signed-off-by: Fenglin Wu <fenglinw@...eaurora.org>
> ---
> .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 28 ++-
> drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 269 ++++++++++++++++++---
> include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 9 +
> 3 files changed, 264 insertions(+), 42 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index 8d893a8..1493c0a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -91,14 +91,18 @@ to specify in a pin configuration subnode:
> Value type: <string>
> Definition: Specify the alternative function to be configured for the
> specified pins. Valid values are:
> - "normal",
> - "paired",
> - "func1",
> - "func2",
> - "dtest1",
> - "dtest2",
> - "dtest3",
> - "dtest4"
> + "normal",
> + "paired",
> + "func1",
> + "func2",
> + "dtest1",
> + "dtest2",
> + "dtest3",
> + "dtest4",
> + And following values are supported by LV/MV GPIO subtypes:
> + "func3",
> + "func4",
> + "analog"
>
> - bias-disable:
> Usage: optional
> @@ -183,6 +187,14 @@ to specify in a pin configuration subnode:
> Value type: <none>
> Definition: The specified pins are configured in open-source mode.
>
> +- qcom,atest:
> + Usage: optional
> + Value type: <u32>
> + Definition: Selects ATEST rail to route to GPIO when it's configured
> + in analog-pass-through mode by specifying "analog" function.
> + Valid values are 0-3 corresponding to PMIC_GPIO_AOUT_ATESTx
> + defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>.
> +
> Example:
>
> pm8921_gpio: gpio@150 {
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index 664b641..caa07e9 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -40,6 +40,8 @@
> #define PMIC_GPIO_SUBTYPE_GPIOC_4CH 0x5
> #define PMIC_GPIO_SUBTYPE_GPIO_8CH 0x9
> #define PMIC_GPIO_SUBTYPE_GPIOC_8CH 0xd
> +#define PMIC_GPIO_SUBTYPE_GPIO_LV 0x10
> +#define PMIC_GPIO_SUBTYPE_GPIO_MV 0x11
>
> #define PMIC_MPP_REG_RT_STS 0x10
> #define PMIC_MPP_REG_RT_STS_VAL_MASK 0x1
> @@ -48,8 +50,10 @@
> #define PMIC_GPIO_REG_MODE_CTL 0x40
> #define PMIC_GPIO_REG_DIG_VIN_CTL 0x41
> #define PMIC_GPIO_REG_DIG_PULL_CTL 0x42
> +#define PMIC_GPIO_REG_LV_MV_DIG_OUT_SOURCE_CTL 0x44
> #define PMIC_GPIO_REG_DIG_OUT_CTL 0x45
> #define PMIC_GPIO_REG_EN_CTL 0x46
> +#define PMIC_GPIO_REG_LV_MV_ANA_PASS_THRU_SEL 0x4A
>
> /* PMIC_GPIO_REG_MODE_CTL */
> #define PMIC_GPIO_REG_MODE_VALUE_SHIFT 0x1
> @@ -58,6 +62,13 @@
> #define PMIC_GPIO_REG_MODE_DIR_SHIFT 4
> #define PMIC_GPIO_REG_MODE_DIR_MASK 0x7
>
> +#define PMIC_GPIO_MODE_DIGITAL_INPUT 0
> +#define PMIC_GPIO_MODE_DIGITAL_OUTPUT 1
> +#define PMIC_GPIO_MODE_DIGITAL_INPUT_OUTPUT 2
> +#define PMIC_GPIO_MODE_ANALOG_PASS_THRU 3
> +
> +#define PMIC_GPIO_REG_LV_MV_MODE_DIR_MASK 0x3
> +
> /* PMIC_GPIO_REG_DIG_VIN_CTL */
> #define PMIC_GPIO_REG_VIN_SHIFT 0
> #define PMIC_GPIO_REG_VIN_MASK 0x7
> @@ -69,6 +80,11 @@
> #define PMIC_GPIO_PULL_DOWN 4
> #define PMIC_GPIO_PULL_DISABLE 5
>
> +/* PMIC_GPIO_REG_LV_MV_DIG_OUT_SOURCE_CTL for LV/MV */
> +#define PMIC_GPIO_LV_MV_OUTPUT_INVERT 0x80
> +#define PMIC_GPIO_LV_MV_OUTPUT_INVERT_SHIFT 7
> +#define PMIC_GPIO_LV_MV_OUTPUT_SOURCE_SEL_MASK 0xF
> +
> /* PMIC_GPIO_REG_DIG_OUT_CTL */
> #define PMIC_GPIO_REG_OUT_STRENGTH_SHIFT 0
> #define PMIC_GPIO_REG_OUT_STRENGTH_MASK 0x3
> @@ -88,9 +104,28 @@
>
> #define PMIC_GPIO_PHYSICAL_OFFSET 1
>
> +/* PMIC_GPIO_REG_LV_MV_ANA_PASS_THRU_SEL */
> +#define PMIC_GPIO_LV_MV_ANA_MUX_SEL_MASK 0x3
> +
> /* Qualcomm specific pin configurations */
> #define PMIC_GPIO_CONF_PULL_UP (PIN_CONFIG_END + 1)
> #define PMIC_GPIO_CONF_STRENGTH (PIN_CONFIG_END + 2)
> +#define PMIC_GPIO_CONF_ATEST (PIN_CONFIG_END + 3)
> +
> +/* The index of each function in pmic_gpio_functions[] array */
> +enum pmic_gpio_func_index {
> + PMIC_GPIO_FUNC_INDEX_NORMAL = 0x00,
> + PMIC_GPIO_FUNC_INDEX_PAIRED = 0x01,
> + PMIC_GPIO_FUNC_INDEX_FUNC1 = 0x02,
> + PMIC_GPIO_FUNC_INDEX_FUNC2 = 0x03,
> + PMIC_GPIO_FUNC_INDEX_FUNC3 = 0x04,
> + PMIC_GPIO_FUNC_INDEX_FUNC4 = 0x05,
> + PMIC_GPIO_FUNC_INDEX_DTEST1 = 0x06,
> + PMIC_GPIO_FUNC_INDEX_DTEST2 = 0x07,
> + PMIC_GPIO_FUNC_INDEX_DTEST3 = 0x08,
> + PMIC_GPIO_FUNC_INDEX_DTEST4 = 0x09,
> + PMIC_GPIO_FUNC_INDEX_ANALOG = 0x10,
> +};
>
> /**
> * struct pmic_gpio_pad - keep current GPIO settings
> @@ -102,12 +137,14 @@
> * open-drain or open-source mode.
> * @output_enabled: Set to true if GPIO output logic is enabled.
> * @input_enabled: Set to true if GPIO input buffer logic is enabled.
> + * @lv_mv_type: Set to true if GPIO subtype is GPIO_LV(0x10) or GPIO_MV(0x11).
> * @num_sources: Number of power-sources supported by this GPIO.
> * @power_source: Current power-source used.
> * @buffer_type: Push-pull, open-drain or open-source.
> * @pullup: Constant current which flow trough GPIO output buffer.
> * @strength: No, Low, Medium, High
> * @function: See pmic_gpio_functions[]
> + * @atest: the ATEST selection for GPIO analog-pass-through mode
> */
> struct pmic_gpio_pad {
> u16 base;
> @@ -117,12 +154,14 @@ struct pmic_gpio_pad {
> bool have_buffer;
> bool output_enabled;
> bool input_enabled;
> + bool lv_mv_type;
> unsigned int num_sources;
> unsigned int power_source;
> unsigned int buffer_type;
> unsigned int pullup;
> unsigned int strength;
> unsigned int function;
> + unsigned int atest;
> };
>
> struct pmic_gpio_state {
> @@ -135,12 +174,14 @@ struct pmic_gpio_state {
> static const struct pinconf_generic_params pmic_gpio_bindings[] = {
> {"qcom,pull-up-strength", PMIC_GPIO_CONF_PULL_UP, 0},
> {"qcom,drive-strength", PMIC_GPIO_CONF_STRENGTH, 0},
> + {"qcom,atest", PMIC_GPIO_CONF_ATEST, 0},
> };
>
> #ifdef CONFIG_DEBUG_FS
> static const struct pin_config_item pmic_conf_items[ARRAY_SIZE(pmic_gpio_bindings)] = {
> PCONFDUMP(PMIC_GPIO_CONF_PULL_UP, "pull up strength", NULL, true),
> PCONFDUMP(PMIC_GPIO_CONF_STRENGTH, "drive-strength", NULL, true),
> + PCONFDUMP(PMIC_GPIO_CONF_ATEST, "atest", NULL, true),
> };
> #endif
>
> @@ -152,11 +193,25 @@ struct pmic_gpio_state {
> "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36",
> };
>
> +/*
> + * Treat LV/MV GPIO analog-pass-through mode as a function, add it
> + * to the end of the function list. Add placeholder for the reserved
> + * functions defined in LV/MV OUTPUT_SOURCE_SEL register.
> + */
> static const char *const pmic_gpio_functions[] = {
> - PMIC_GPIO_FUNC_NORMAL, PMIC_GPIO_FUNC_PAIRED,
> - PMIC_GPIO_FUNC_FUNC1, PMIC_GPIO_FUNC_FUNC2,
> - PMIC_GPIO_FUNC_DTEST1, PMIC_GPIO_FUNC_DTEST2,
> - PMIC_GPIO_FUNC_DTEST3, PMIC_GPIO_FUNC_DTEST4,
> + [PMIC_GPIO_FUNC_INDEX_NORMAL] = PMIC_GPIO_FUNC_NORMAL,
> + [PMIC_GPIO_FUNC_INDEX_PAIRED] = PMIC_GPIO_FUNC_PAIRED,
> + [PMIC_GPIO_FUNC_INDEX_FUNC1] = PMIC_GPIO_FUNC_FUNC1,
> + [PMIC_GPIO_FUNC_INDEX_FUNC2] = PMIC_GPIO_FUNC_FUNC2,
> + [PMIC_GPIO_FUNC_INDEX_FUNC3] = PMIC_GPIO_FUNC_FUNC3,
> + [PMIC_GPIO_FUNC_INDEX_FUNC4] = PMIC_GPIO_FUNC_FUNC4,
> + [PMIC_GPIO_FUNC_INDEX_DTEST1] = PMIC_GPIO_FUNC_DTEST1,
> + [PMIC_GPIO_FUNC_INDEX_DTEST2] = PMIC_GPIO_FUNC_DTEST2,
> + [PMIC_GPIO_FUNC_INDEX_DTEST3] = PMIC_GPIO_FUNC_DTEST3,
> + [PMIC_GPIO_FUNC_INDEX_DTEST4] = PMIC_GPIO_FUNC_DTEST4,
> + "reserved-a", "reserved-b", "reserved-c",
> + "reserved-d", "reserved-e", "reserved-f",
> + [PMIC_GPIO_FUNC_INDEX_ANALOG] = PMIC_GPIO_FUNC_ANALOG,
> };
>
> static int pmic_gpio_read(struct pmic_gpio_state *state,
> @@ -248,21 +303,74 @@ static int pmic_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned function,
>
> pad->function = function;
>
> - val = 0;
> + val = PMIC_GPIO_MODE_DIGITAL_INPUT;
> if (pad->output_enabled) {
> if (pad->input_enabled)
> - val = 2;
> + val = PMIC_GPIO_MODE_DIGITAL_INPUT_OUTPUT;
> else
> - val = 1;
> + val = PMIC_GPIO_MODE_DIGITAL_OUTPUT;
> }
>
> - val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
> - val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> - val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
> + if (function > PMIC_GPIO_FUNC_INDEX_DTEST4 &&
> + function < PMIC_GPIO_FUNC_INDEX_ANALOG) {
> + pr_err("reserved function: %s hasn't been enabled\n",
> + pmic_gpio_functions[function]);
> + return -EINVAL;
> + }
>
> - ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
> - if (ret < 0)
> - return ret;
> + if (pad->lv_mv_type) {
> + if (pad->function == PMIC_GPIO_FUNC_INDEX_ANALOG) {
> + val = PMIC_GPIO_MODE_ANALOG_PASS_THRU;
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
> +
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_LV_MV_ANA_PASS_THRU_SEL,
> + pad->atest);
> + if (ret < 0)
> + return ret;
> + } else {
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
> +
> + val = pad->out_value
> + << PMIC_GPIO_LV_MV_OUTPUT_INVERT_SHIFT;
> + val |= pad->function
> + & PMIC_GPIO_LV_MV_OUTPUT_SOURCE_SEL_MASK;
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_LV_MV_DIG_OUT_SOURCE_CTL, val);
> + if (ret < 0)
> + return ret;
> + }
> + } else {
> + /*
> + * GPIO not of LV/MV subtype doesn't have "func3", "func4"
> + * "analog" functions, and "dtest1" to "dtest4" functions
> + * have register value 2 bits lower than the function index
> + * in pmic_gpio_functions[].
> + */
> + if (function == PMIC_GPIO_FUNC_INDEX_FUNC3
> + || function == PMIC_GPIO_FUNC_INDEX_FUNC4
> + || function == PMIC_GPIO_FUNC_INDEX_ANALOG) {
> + return -EINVAL;
> + } else if (function >= PMIC_GPIO_FUNC_INDEX_DTEST1 &&
> + function <= PMIC_GPIO_FUNC_INDEX_DTEST4) {
> + pad->function -= (PMIC_GPIO_FUNC_INDEX_DTEST1 -
> + PMIC_GPIO_FUNC_INDEX_FUNC3);
> + }
> +
> + val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
> + val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> + val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
> +
> + ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
> + }
>
> val = pad->is_enabled << PMIC_GPIO_REG_MASTER_EN_SHIFT;
>
> @@ -322,6 +430,9 @@ static int pmic_gpio_config_get(struct pinctrl_dev *pctldev,
> case PMIC_GPIO_CONF_STRENGTH:
> arg = pad->strength;
> break;
> + case PMIC_GPIO_CONF_ATEST:
> + arg = pad->atest;
> + break;
> default:
> return -EINVAL;
> }
> @@ -396,6 +507,11 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
> return -EINVAL;
> pad->strength = arg;
> break;
> + case PMIC_GPIO_CONF_ATEST:
> + if (arg > PMIC_GPIO_AOUT_ATEST4)
> + return -EINVAL;
> + pad->atest = arg;
> + break;
> default:
> return -EINVAL;
> }
> @@ -420,19 +536,53 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
> if (ret < 0)
> return ret;
>
> - val = 0;
> + val = PMIC_GPIO_MODE_DIGITAL_INPUT;
> if (pad->output_enabled) {
> if (pad->input_enabled)
> - val = 2;
> + val = PMIC_GPIO_MODE_DIGITAL_INPUT_OUTPUT;
> else
> - val = 1;
> + val = PMIC_GPIO_MODE_DIGITAL_OUTPUT;
> }
>
> - val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
> - val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> - val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
> + if (pad->lv_mv_type) {
> + if (pad->function == PMIC_GPIO_FUNC_INDEX_ANALOG) {
> + val = PMIC_GPIO_MODE_ANALOG_PASS_THRU;
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
>
> - return pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_LV_MV_ANA_PASS_THRU_SEL,
> + pad->atest);
> + if (ret < 0)
> + return ret;
> + } else {
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
> +
> + val = pad->out_value
> + << PMIC_GPIO_LV_MV_OUTPUT_INVERT_SHIFT;
> + val |= pad->function
> + & PMIC_GPIO_LV_MV_OUTPUT_SOURCE_SEL_MASK;
> + ret = pmic_gpio_write(state, pad,
> + PMIC_GPIO_REG_LV_MV_DIG_OUT_SOURCE_CTL, val);
> + if (ret < 0)
> + return ret;
> + }
> + } else {
> + val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
> + val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> + val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
> +
> + ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_MODE_CTL, val);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return ret;
> }
>
> static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
> @@ -440,7 +590,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
> {
> struct pmic_gpio_state *state = pinctrl_dev_get_drvdata(pctldev);
> struct pmic_gpio_pad *pad;
> - int ret, val;
> + int ret, val, function;
>
> static const char *const biases[] = {
> "pull-up 30uA", "pull-up 1.5uA", "pull-up 31.5uA",
> @@ -471,9 +621,21 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
> ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
> pad->out_value = ret;
> }
> + /*
> + * For GPIO not of LV/MV subtypes, the register value of
> + * the function mapping from "dtest1" to "dtest4" is 2 bits
> + * lower than the function index in pmic_gpio_functions[].
> + */
> + if (!pad->lv_mv_type &&
> + pad->function >= PMIC_GPIO_FUNC_INDEX_FUNC3) {
> + function = pad->function + (PMIC_GPIO_FUNC_INDEX_DTEST1
> + - PMIC_GPIO_FUNC_INDEX_FUNC3);
> + } else {
> + function = pad->function;
> + }
>
> seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
> - seq_printf(s, " %-7s", pmic_gpio_functions[pad->function]);
> + seq_printf(s, " %-7s", pmic_gpio_functions[function]);
> seq_printf(s, " vin-%d", pad->power_source);
> seq_printf(s, " %-27s", biases[pad->pullup]);
> seq_printf(s, " %-10s", buffer_types[pad->buffer_type]);
> @@ -618,40 +780,72 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
> case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
> pad->num_sources = 8;
> break;
> + case PMIC_GPIO_SUBTYPE_GPIO_LV:
> + pad->num_sources = 1;
> + pad->have_buffer = true;
> + pad->lv_mv_type = true;
> + break;
> + case PMIC_GPIO_SUBTYPE_GPIO_MV:
> + pad->num_sources = 2;
> + pad->have_buffer = true;
> + pad->lv_mv_type = true;
> + break;
> default:
> dev_err(state->dev, "unknown GPIO type 0x%x\n", subtype);
> return -ENODEV;
> }
>
> - val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_MODE_CTL);
> - if (val < 0)
> - return val;
> + if (pad->lv_mv_type) {
> + val = pmic_gpio_read(state, pad,
> + PMIC_GPIO_REG_LV_MV_DIG_OUT_SOURCE_CTL);
> + if (val < 0)
> + return val;
> +
> + pad->out_value = !!(val & PMIC_GPIO_LV_MV_OUTPUT_INVERT);
> + pad->function = val & PMIC_GPIO_LV_MV_OUTPUT_SOURCE_SEL_MASK;
> +
> + val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_MODE_CTL);
> + if (val < 0)
> + return val;
> +
> + dir = val & PMIC_GPIO_REG_LV_MV_MODE_DIR_MASK;
> + } else {
> + val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_MODE_CTL);
> + if (val < 0)
> + return val;
> +
> + pad->out_value = val & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
>
> - pad->out_value = val & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
> + dir = val >> PMIC_GPIO_REG_MODE_DIR_SHIFT;
> + dir &= PMIC_GPIO_REG_MODE_DIR_MASK;
> + pad->function = val >> PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> + pad->function &= PMIC_GPIO_REG_MODE_FUNCTION_MASK;
> + }
>
> - dir = val >> PMIC_GPIO_REG_MODE_DIR_SHIFT;
> - dir &= PMIC_GPIO_REG_MODE_DIR_MASK;
> switch (dir) {
> - case 0:
> + case PMIC_GPIO_MODE_DIGITAL_INPUT:
> pad->input_enabled = true;
> pad->output_enabled = false;
> break;
> - case 1:
> + case PMIC_GPIO_MODE_DIGITAL_OUTPUT:
> pad->input_enabled = false;
> pad->output_enabled = true;
> break;
> - case 2:
> + case PMIC_GPIO_MODE_DIGITAL_INPUT_OUTPUT:
> pad->input_enabled = true;
> pad->output_enabled = true;
> break;
> + case PMIC_GPIO_MODE_ANALOG_PASS_THRU:
> + if (pad->lv_mv_type)
> + pad->function = PMIC_GPIO_FUNC_INDEX_ANALOG;
> + else
> + return -ENODEV;
> + break;
> default:
> dev_err(state->dev, "unknown GPIO direction\n");
> return -ENODEV;
> }
>
> - pad->function = val >> PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
> - pad->function &= PMIC_GPIO_REG_MODE_FUNCTION_MASK;
> -
> val = pmic_gpio_read(state, pad, PMIC_GPIO_REG_DIG_VIN_CTL);
> if (val < 0)
> return val;
> @@ -676,6 +870,13 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
> pad->buffer_type = val >> PMIC_GPIO_REG_OUT_TYPE_SHIFT;
> pad->buffer_type &= PMIC_GPIO_REG_OUT_TYPE_MASK;
>
> + if (pad->function == PMIC_GPIO_FUNC_INDEX_ANALOG) {
> + val = pmic_gpio_read(state, pad,
> + PMIC_GPIO_REG_LV_MV_ANA_PASS_THRU_SEL);
> + if (val < 0)
> + return val;
> + pad->atest = val & PMIC_GPIO_LV_MV_ANA_MUX_SEL_MASK;
> + }
> /* Pin could be disabled with PIN_CONFIG_BIAS_HIGH_IMPEDANCE */
> pad->is_enabled = true;
> return 0;
> diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
> index d33f17c..85d8809 100644
> --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
> +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
> @@ -93,15 +93,24 @@
> #define PM8994_GPIO_S4 2
> #define PM8994_GPIO_L12 3
>
> +/* ATEST MUX selection for analog-pass-through mode */
> +#define PMIC_GPIO_AOUT_ATEST1 0
> +#define PMIC_GPIO_AOUT_ATEST2 1
> +#define PMIC_GPIO_AOUT_ATEST3 2
> +#define PMIC_GPIO_AOUT_ATEST4 3
> +
> /* To be used with "function" */
> #define PMIC_GPIO_FUNC_NORMAL "normal"
> #define PMIC_GPIO_FUNC_PAIRED "paired"
> #define PMIC_GPIO_FUNC_FUNC1 "func1"
> #define PMIC_GPIO_FUNC_FUNC2 "func2"
> +#define PMIC_GPIO_FUNC_FUNC3 "func3"
> +#define PMIC_GPIO_FUNC_FUNC4 "func4"
> #define PMIC_GPIO_FUNC_DTEST1 "dtest1"
> #define PMIC_GPIO_FUNC_DTEST2 "dtest2"
> #define PMIC_GPIO_FUNC_DTEST3 "dtest3"
> #define PMIC_GPIO_FUNC_DTEST4 "dtest4"
> +#define PMIC_GPIO_FUNC_ANALOG "analog"
>
> #define PM8038_GPIO1_2_LPG_DRV PMIC_GPIO_FUNC_FUNC1
> #define PM8038_GPIO3_5V_BOOST_EN PMIC_GPIO_FUNC_FUNC1
> --
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project.
>
Powered by blists - more mailing lists