[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87efue4un7.fsf@free-electrons.com>
Date: Tue, 20 Jun 2017 16:10:36 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Stephen Boyd <sboyd@...eaurora.org>
Cc: Mike Turquette <mturquette@...libre.com>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Nadav Haklai <nadavh@...vell.com>,
Kostya Porotchkin <kostap@...vell.com>,
Neta Zur Hershkovits <neta@...vell.com>,
Marcin Wojtas <mw@...ihalf.com>,
Omri Itach <omrii@...vell.com>,
Shadi Ammouri <shadi@...vell.com>
Subject: Re: [PATCH v3 8/9] arm64: dts: marvell: remove *-clock-output-names on cp110
Hi,
On jeu., juin 01 2017, Gregory CLEMENT <gregory.clement@...e-electrons.com> wrote:
> The *-clock-output-names of the cp110-system-controller0 node are not
> used anymore, so remove them.
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 13 +-------------
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 13 +-------------
> 2 files changed, 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index ac8df5201cd6..a0f57a8e5dcb 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -101,19 +101,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cpm-apll", "cpm-ppv2-core", "cpm-eip",
> - "cpm-core", "cpm-nand-core";
> - gate-clock-output-names =
> - "cpm-audio", "cpm-communit", "cpm-nand",
> - "cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
> - "cpm-mg-core", "cpm-xor1", "cpm-xor0",
> - "cpm-gop-dp", "none", "cpm-pcie_x10",
> - "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
> - "cpm-sata", "cpm-sata-usb", "cpm-main",
> - "cpm-sd-mmc-gop", "none", "none",
> - "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
> - "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
> };
>
> cpm_rtc: rtc@...000 {
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 7740a75a8230..9584bc8d8b3f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -108,19 +108,6 @@
> "syscon";
> reg = <0x440000 0x1000>;
> #clock-cells = <2>;
> - core-clock-output-names =
> - "cps-apll", "cps-ppv2-core", "cps-eip",
> - "cps-core", "cps-nand-core";
> - gate-clock-output-names =
> - "cps-audio", "cps-communit", "cps-nand",
> - "cps-ppv2", "cps-sdio", "cps-mg-domain",
> - "cps-mg-core", "cps-xor1", "cps-xor0",
> - "cps-gop-dp", "none", "cps-pcie_x10",
> - "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
> - "cps-sata", "cps-sata-usb", "cps-main",
> - "cps-sd-mmc-gop", "none", "none",
> - "cps-slow-io", "cps-usb3h0", "cps-usb3h1",
> - "cps-usb3dev", "cps-eip150", "cps-eip197";
> };
>
> cps_sata0: sata@...000 {
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Powered by blists - more mailing lists