[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170620175348.300155bb@kernel.org>
Date: Tue, 20 Jun 2017 17:53:48 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Eugen Hristev <eugen.hristev@...rochip.com>
Cc: <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>,
<linux-iio@...r.kernel.org>, <lars@...afoo.de>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<ludovic.desroches@...rochip.com>, <robh@...nel.org>
Subject: Re: [PATCH v5 2/4] Documentation: dt: iio: at91-sama5d2_adc: add hw
trigger edge binding
On Thu, 15 Jun 2017 16:24:55 +0300
Eugen Hristev <eugen.hristev@...rochip.com> wrote:
> Add property for the edge type of the hardware trigger pin ADTRG
>
> Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
> Acked-by: Rob Herring <robh@...nel.org>
> Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> Changes in v4:
> - Modified bindings to be similar with interrupts
>
> Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> index 3223684..552e7a8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> @@ -11,6 +11,11 @@ Required properties:
> - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
> - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
> - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
> + - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware
> + trigger pin. When the specific edge type is detected, the conversion will
> + start. Possible values are rising, falling, or both.
> + This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
> + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
>
> Example:
>
> @@ -25,4 +30,5 @@ adc: adc@...30000 {
> atmel,startup-time-ms = <4>;
> vddana-supply = <&vdd_3v3_lp_reg>;
> vref-supply = <&vdd_3v3_lp_reg>;
> + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
> }
Powered by blists - more mailing lists