[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f880d3e38cdbf07d7f4cbb26453be160b33c8635.1498026827.git.viresh.kumar@linaro.org>
Date: Wed, 21 Jun 2017 12:40:51 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Rafael Wysocki <rjw@...ysocki.net>, ulf.hansson@...aro.org,
Kevin Hilman <khilman@...nel.org>
Cc: Viresh Kumar <viresh.kumar@...aro.org>, linux-pm@...r.kernel.org,
Vincent Guittot <vincent.guittot@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Nishanth Menon <nm@...com>, robh+dt@...nel.org,
lina.iyer@...aro.org, rnayak@...eaurora.org, sudeep.holla@....com,
linux-kernel@...r.kernel.org, Len Brown <len.brown@...el.com>,
Pavel Machek <pavel@....cz>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>
Subject: [NOT-FOR-MERGE V8 4/6] soc: qcom: rpmpd: Add support for get/set performance state
From: Rajendra Nayak <rnayak@...eaurora.org>
THIS IS TEST CODE, SHOULDN'T BE MERGED.
With genpd now expecting powerdomain drivers supporting performance
state to support get/set performance state callbacks, add support for it
in the rpmpd driver.
NOT-signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
NOT-signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
drivers/soc/qcom/rpmpd.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index d34d9c363815..7ef81429c5c5 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -101,6 +101,20 @@ struct rpmpd_desc {
size_t num_pds;
};
+enum rpmpd_levels {
+ NONE,
+ LOWER, /* SVS2 */
+ LOW, /* SVS */
+ NOMINAL, /* NOMINAL */
+ HIGH, /* Turbo */
+ MAX_LEVEL,
+};
+
+struct rpmpd_freq_map {
+ struct rpmpd *pd;
+ unsigned long freq[MAX_LEVEL];
+};
+
static DEFINE_MUTEX(rpmpd_lock);
/* msm8996 RPM powerdomains */
@@ -126,6 +140,47 @@ static const struct rpmpd_desc msm8996_desc = {
.num_pds = ARRAY_SIZE(msm8996_rpmpds),
};
+enum msm8996_devices {
+ SDHCI,
+ UFS,
+ PCIE,
+ USB3,
+};
+
+static struct rpmpd_freq_map msm8996_rpmpd_freq_map[] = {
+ [SDHCI] = {
+ .pd = &msm8996_vddcx,
+ .freq[LOWER] = 19200000,
+ .freq[LOW] = 200000000,
+ .freq[NOMINAL] = 400000000,
+ },
+ [UFS] = {
+ .pd = &msm8996_vddcx,
+ .freq[LOWER] = 19200000,
+ .freq[LOW] = 100000000,
+ .freq[NOMINAL] = 200000000,
+ .freq[HIGH] = 240000000,
+ },
+ [PCIE] = {
+ .pd = &msm8996_vddcx,
+ .freq[LOWER] = 1011000,
+ },
+ [USB3] = {
+ .pd = &msm8996_vddcx,
+ .freq[LOWER] = 60000000,
+ .freq[LOW] = 120000000,
+ .freq[NOMINAL] = 150000000,
+ },
+};
+
+static const struct of_device_id rpmpd_performance_table[] = {
+ { .compatible = "qcom,sdhci-msm-v4", .data = (void *)SDHCI },
+ { .compatible = "qcom,ufshc", .data = (void *)UFS },
+ { .compatible = "qcom,pcie-msm8996", .data = (void *)PCIE },
+ { .compatible = "qcom,dwc3", .data = (void *)USB3 },
+ { }
+};
+
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,rpmpd-msm8996", .data = &msm8996_desc },
{ }
@@ -230,6 +285,49 @@ static int rpmpd_power_off(struct generic_pm_domain *domain)
return ret;
}
+static int rpmpd_set_performance(struct generic_pm_domain *domain,
+ unsigned int state)
+{
+ int ret = 0;
+ struct rpmpd *pd = domain_to_rpmpd(domain);
+
+ mutex_lock(&rpmpd_lock);
+
+ pd->corner = state;
+
+ if (!pd->enabled && (pd->key != KEY_FLOOR_CORNER))
+ goto out;
+
+ ret = rpmpd_aggregate_corner(pd);
+
+out:
+ mutex_unlock(&rpmpd_lock);
+
+ return ret;
+}
+
+
+static int rpmpd_get_performance(struct device *dev, unsigned long rate)
+{
+ int i;
+ unsigned long index;
+ const struct of_device_id *id;
+
+ if (!rate)
+ return 0;
+
+ id = of_match_device(rpmpd_performance_table, dev);
+ if (!id)
+ return -EINVAL;
+
+ index = (unsigned long)id->data;
+ for (i = 0; i < MAX_LEVEL; i++)
+ if (msm8996_rpmpd_freq_map[index].freq[i] >= rate)
+ return i;
+
+ return MAX_LEVEL;
+}
+
static int rpmpd_probe(struct platform_device *pdev)
{
int i;
@@ -267,6 +365,8 @@ static int rpmpd_probe(struct platform_device *pdev)
rpmpds[i]->rpm = rpm;
rpmpds[i]->pd.power_off = rpmpd_power_off;
rpmpds[i]->pd.power_on = rpmpd_power_on;
+ rpmpds[i]->pd.set_performance_state = rpmpd_set_performance;
+ rpmpds[i]->pd.get_performance_state = rpmpd_get_performance;
pm_genpd_init(&rpmpds[i]->pd, NULL, true);
data->domains[i] = &rpmpds[i]->pd;
--
2.13.0.71.gd7076ec9c9cb
Powered by blists - more mailing lists