[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1498035645-22804-1-git-send-email-xuejiancheng@hisilicon.com>
Date: Wed, 21 Jun 2017 17:00:40 +0800
From: Jiancheng Xue <xuejiancheng@...ilicon.com>
To: <sboyd@...eaurora.org>, <robh+dt@...nel.org>, <kishon@...com>,
<xuwei5@...ilicon.com>, <catalin.marinas@....com>,
<balbi@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<project-aspen-dev@...aro.org>, <yanhaifeng@...ilicon.com>,
Jiancheng Xue <xuejiancheng@...ilicon.com>
Subject: [PATCH 0/5] enable usb2 function on poplar board.
This patchset is mainly used to enable usb2 function on poplar board.
Jiancheng Xue (4):
clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy
arm64: dts: hisilicon: add usb2 controller and phy nodes for poplar
board.
arm64: defconfig: enable some drivers and configs for
hi3798cv200-poplar board.
Pengcheng Li (1):
phy: add inno-usb2-phy driver for hi3798cv200 SoC
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 36 +++
.../boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 47 ++++
arch/arm64/configs/defconfig | 13 +-
drivers/clk/hisilicon/crg-hi3798cv200.c | 21 ++
drivers/phy/Kconfig | 10 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-hisi-inno-usb2.c | 287 +++++++++++++++++++++
include/dt-bindings/clock/histb-clock.h | 9 +-
9 files changed, 435 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/phy-hisi-inno-usb2.c
--
1.9.1
Powered by blists - more mailing lists