| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170621150940.GA21312@roeck-us.net>
Date: Wed, 21 Jun 2017 08:09:40 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Zoltán Böszörményi <zboszor@...hu>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-i2c@...r.kernel.org,
Paul Menzel <paulepanter@...rs.sourceforge.net>,
Christian Fetzer <fetzer.ch@...il.com>,
Jean Delvare <jdelvare@...e.com>,
Nehal Shah <nehal-bakulchandra.shah@....com>,
Tim Small <tim@...ss.co.uk>, kernel@...ss.net, wim@...ana.be,
jlayton@...chiereds.net, marc.2377@...il.com,
cshorler@...glemail.com, wsa@...-dreams.de,
regressions@...mhuis.info
Subject: Re: [PATCH 5/5] watchdog: sp5100_tco: Use
request_declared_muxed_region()
On Wed, Jun 21, 2017 at 05:53:49AM +0200, Zoltán Böszörményi wrote:
> Use the new request_declared_muxed_region() macro to synchronize
> accesses to the SB800 I/O port pair (0xcd6 / 0xcd7) with the
> PCI quirk for isochronous USB transfers and with the i2c-piix4
> driver.
>
> At the same time, remove the long lifetime request_region() call
> to reserve these I/O ports, similarly to i2c-piix4 so the code is
> now uniform across the three drivers.
>
> Signed-off-by: Zoltán Böszörményi <zboszor@...hu>
> ---
> drivers/watchdog/sp5100_tco.c | 25 ++++++++++++-------------
> 1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index 028618c..9bb3bcb 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -48,7 +48,6 @@
> static u32 tcobase_phys;
> static u32 tco_wdt_fired;
> static void __iomem *tcobase;
> -static unsigned int pm_iobase;
> static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */
> static unsigned long timer_alive;
> static char tco_expect_close;
> @@ -134,11 +133,13 @@ static int tco_timer_set_heartbeat(int t)
>
> static void tco_timer_enable(void)
> {
> + struct resource res = DEFINE_RES_IO_NAMED(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME);
Is it necessary to have this as a local variable ?
If not, please declare as static variable.
Either case, please run our patches through checkpatch and address
any problems it reports.
> int val;
>
> if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
> /* For SB800 or later */
> /* Set the Watchdog timer resolution to 1 sec */
> + request_declared_muxed_region(&res);
> outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
> val = inb(SB800_IO_PM_DATA_REG);
> val |= SB800_PM_WATCHDOG_SECOND_RES;
> @@ -150,6 +151,7 @@ static void tco_timer_enable(void)
> val |= SB800_PCI_WATCHDOG_DECODE_EN;
> val &= ~SB800_PM_WATCHDOG_DISABLE;
> outb(val, SB800_IO_PM_DATA_REG);
> + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
> } else {
> /* For SP5100 or SB7x0 */
> /* Enable watchdog decode bit */
> @@ -164,11 +166,13 @@ static void tco_timer_enable(void)
> val);
>
> /* Enable Watchdog timer and set the resolution to 1 sec */
> + request_declared_muxed_region(&res);
> outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
> val = inb(SP5100_IO_PM_DATA_REG);
> val |= SP5100_PM_WATCHDOG_SECOND_RES;
> val &= ~SP5100_PM_WATCHDOG_DISABLE;
> outb(val, SP5100_IO_PM_DATA_REG);
> + release_region(SB800_IO_PM_INDEX_REG, 2);
> }
> }
>
> @@ -326,6 +330,7 @@ MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
> */
> static unsigned char sp5100_tco_setupdevice(void)
> {
> + struct resource res = DEFINE_RES_IO_NAMED(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME);
> struct pci_dev *dev = NULL;
> const char *dev_name = NULL;
> u32 val;
> @@ -361,16 +366,10 @@ static unsigned char sp5100_tco_setupdevice(void)
> base_addr = SB800_PM_WATCHDOG_BASE;
> }
>
> - /* Request the IO ports used by this driver */
> - pm_iobase = SP5100_IO_PM_INDEX_REG;
> - if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) {
> - pr_err("I/O address 0x%04x already in use\n", pm_iobase);
> - goto exit;
> - }
> -
> /*
> * First, Find the watchdog timer MMIO address from indirect I/O.
> */
> + request_declared_muxed_region(&res);
> outb(base_addr+3, index_reg);
> val = inb(data_reg);
> outb(base_addr+2, index_reg);
> @@ -380,6 +379,7 @@ static unsigned char sp5100_tco_setupdevice(void)
> outb(base_addr+0, index_reg);
> /* Low three bits of BASE are reserved */
> val = val << 8 | (inb(data_reg) & 0xf8);
> + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
>
> pr_debug("Got 0x%04x from indirect I/O\n", val);
>
> @@ -400,6 +400,7 @@ static unsigned char sp5100_tco_setupdevice(void)
> SP5100_SB_RESOURCE_MMIO_BASE, &val);
> } else {
> /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
> + request_declared_muxed_region(&res);
> outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
> val = inb(SB800_IO_PM_DATA_REG);
> outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG);
> @@ -408,6 +409,7 @@ static unsigned char sp5100_tco_setupdevice(void)
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
> }
>
> /* The SBResource_MMIO is enabled and mapped memory space? */
> @@ -429,7 +431,7 @@ static unsigned char sp5100_tco_setupdevice(void)
> pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
>
> pr_notice("failed to find MMIO address, giving up.\n");
> - goto unreg_region;
> + goto exit;
>
> setup_wdt:
> tcobase_phys = val;
> @@ -469,8 +471,6 @@ static unsigned char sp5100_tco_setupdevice(void)
>
> unreg_mem_region:
> release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
> -unreg_region:
> - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
> exit:
> return 0;
> }
> @@ -517,7 +517,7 @@ static int sp5100_tco_init(struct platform_device *dev)
> exit:
> iounmap(tcobase);
> release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
> - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
> + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
> return ret;
> }
>
> @@ -531,7 +531,6 @@ static void sp5100_tco_cleanup(void)
> misc_deregister(&sp5100_tco_miscdev);
> iounmap(tcobase);
> release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
> - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
> }
>
> static int sp5100_tco_remove(struct platform_device *dev)
> --
> 2.9.4
>
Powered by blists - more mailing lists