| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 22 Jun 2017 11:22:13 +0000
From: root <yang.zhang.wz@...il.com>
To: tglx@...utronix.de, mingo@...hat.com, hpa@...or.com,
pbonzini@...hat.com
Cc: x86@...nel.org, corbet@....net, tony.luck@...el.com, bp@...en8.de,
peterz@...radead.org, mchehab@...nel.org,
akpm@...ux-foundation.org, krzk@...nel.org, jpoimboe@...hat.com,
luto@...nel.org, borntraeger@...ibm.com, thgarnie@...gle.com,
rgerst@...il.com, minipli@...glemail.com,
douly.fnst@...fujitsu.com, nicstange@...il.com, fweisbec@...il.com,
dvlasenk@...hat.com, bristot@...hat.com,
yamada.masahiro@...ionext.com, mika.westerberg@...ux.intel.com,
yu.c.chen@...el.com, aaron.lu@...el.com, rostedt@...dmis.org,
me@...ehuey.com, len.brown@...el.com, prarit@...hat.com,
hidehiro.kawai.ez@...achi.com, fengtiantian@...wei.com,
pmladek@...e.com, jeyu@...hat.com, Larry.Finger@...inger.net,
zijun_hu@....com, luisbg@....samsung.com, johannes.berg@...el.com,
niklas.soderlund+renesas@...natech.se, zlpnobody@...il.com,
adobriyan@...il.com, fgao@...ai8.com, ebiederm@...ssion.com,
subashab@...eaurora.org, arnd@...db.de, matt@...eblueprint.co.uk,
mgorman@...hsingularity.net, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, linux-edac@...r.kernel.org,
kvm@...r.kernel.org, Yang Zhang <yang.zhang.wz@...il.com>
Subject: [PATCH 1/2] x86/idle: add halt poll for halt idle
From: Yang Zhang <yang.zhang.wz@...il.com>
This patch introduce a new mechanism to poll for a while before
entering idle state.
David has a topic in KVM forum to describe the problem on current KVM VM
when running some message passing workload in KVM forum. Also, there
are some work to improve the performance in KVM, like halt polling in KVM.
But we still has 4 MSR wirtes and HLT vmexit when going into halt idle
which introduce lot of latency.
Halt polling in KVM provide the capbility to not schedule out VCPU when
it is the only task in this pCPU. Unlike it, this patch will let VCPU polls
for a while if there is no work inside VCPU to elimiate heavy vmexit during
in/out idle. The potential impact is it will cost more CPU cycle since we
are doing polling and may impact other task which waiting on the same
physical CPU in host.
Here is the data i get when running benchmark contextswitch
(https://github.com/tsuna/contextswitch)
before patch:
2000000 process context switches in 4822613801ns (2411.3ns/ctxsw)
after patch:
2000000 process context switches in 3584098241ns (1792.0ns/ctxsw)
Signed-off-by: Yang Zhang <yang.zhang.wz@...il.com>
---
Documentation/sysctl/kernel.txt | 10 ++++++++++
arch/x86/kernel/process.c | 21 +++++++++++++++++++++
include/linux/kernel.h | 3 +++
kernel/sched/idle.c | 3 +++
kernel/sysctl.c | 9 +++++++++
5 files changed, 46 insertions(+)
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index bac23c1..4e71bfe 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -63,6 +63,7 @@ show up in /proc/sys/kernel:
- perf_event_max_stack
- perf_event_max_contexts_per_stack
- pid_max
+- poll_threshold_ns [ X86 only ]
- powersave-nap [ PPC only ]
- printk
- printk_delay
@@ -702,6 +703,15 @@ kernel tries to allocate a number starting from this one.
==============================================================
+poll_threshold_ns: (X86 only)
+
+This parameter used to control the max wait time to poll before going
+into real idle state. By default, the values is 0 means don't poll.
+It is recommended to change the value to non-zero if running latency-bound
+workloads in VM.
+
+==============================================================
+
powersave-nap: (PPC only)
If set, Linux-PPC will use the 'nap' mode of powersaving,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 0bb8842..6361783 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -39,6 +39,10 @@
#include <asm/desc.h>
#include <asm/prctl.h>
+#ifdef CONFIG_HYPERVISOR_GUEST
+unsigned long poll_threshold_ns;
+#endif
+
/*
* per-CPU TSS segments. Threads are completely 'soft' on Linux,
* no more per-task TSS's. The TSS size is kept cacheline-aligned
@@ -313,6 +317,23 @@ static inline void play_dead(void)
}
#endif
+#ifdef CONFIG_HYPERVISOR_GUEST
+void arch_cpu_idle_poll(void)
+{
+ ktime_t start, cur, stop;
+
+ if (poll_threshold_ns) {
+ start = cur = ktime_get();
+ stop = ktime_add_ns(ktime_get(), poll_threshold_ns);
+ do {
+ if (need_resched())
+ break;
+ cur = ktime_get();
+ } while (ktime_before(cur, stop));
+ }
+}
+#endif
+
void arch_cpu_idle_enter(void)
{
tsc_verify_tsc_adjust(false);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 13bc08a..04cf774 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -460,6 +460,9 @@ extern __scanf(2, 0)
extern int sysctl_panic_on_stackoverflow;
extern bool crash_kexec_post_notifiers;
+#ifdef CONFIG_HYPERVISOR_GUEST
+extern unsigned long poll_threshold_ns;
+#endif
/*
* panic_cpu is used for synchronizing panic() and crash_kexec() execution. It
diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c
index 2a25a9e..e789f99 100644
--- a/kernel/sched/idle.c
+++ b/kernel/sched/idle.c
@@ -74,6 +74,7 @@ static noinline int __cpuidle cpu_idle_poll(void)
}
/* Weak implementations for optional arch specific functions */
+void __weak arch_cpu_idle_poll(void) { }
void __weak arch_cpu_idle_prepare(void) { }
void __weak arch_cpu_idle_enter(void) { }
void __weak arch_cpu_idle_exit(void) { }
@@ -219,6 +220,8 @@ static void do_idle(void)
*/
__current_set_polling();
+ arch_cpu_idle_poll();
+
tick_nohz_idle_enter();
while (!need_resched()) {
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4dfba1a..9174d57 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1203,6 +1203,15 @@ static int sysrq_sysctl_handler(struct ctl_table *table, int write,
.extra2 = &one,
},
#endif
+#ifdef CONFIG_HYPERVISOR_GUEST
+ {
+ .procname = "halt_poll_threshold",
+ .data = &poll_threshold_ns,
+ .maxlen = sizeof(unsigned long),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+#endif
{ }
};
--
1.8.3.1
Powered by blists - more mailing lists