[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5c4c0a7b844055b32b8463fcee04401e@codeaurora.org>
Date: Thu, 22 Jun 2017 18:05:40 -0700
From: Subhash Jadavani <subhashj@...eaurora.org>
To: Arnd Bergmann <arnd@...db.de>
Cc: Bu Tao <butao@...wei.com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Wei Xu <xuwei5@...ilicon.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Vinayak Holikatti <vinholikatti@...il.com>,
"James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Kevin Hilman <khilman@...libre.com>,
Gregory CLEMENT <gregory.clement@...e-electrons.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Riku Voipio <riku.voipio@...aro.org>,
Thierry Reding <treding@...dia.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Eric Anholt <eric@...olt.net>, devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-scsi@...r.kernel.org, Guodong Xu <guodong.xu@...aro.org>,
suzhuangluan@...ilicon.com, kongfei@...ilicon.com,
linux-scsi-owner@...r.kernel.org
Subject: Re: [PATCH v2 2/5] dt-bindings: scsi: ufs: add document for
hi3660-ufs
On 2017-06-22 04:51, Arnd Bergmann wrote:
> On Thu, Jun 22, 2017 at 1:44 PM, Bu Tao <butao@...wei.com> wrote:
>> 在 2017/6/17 5:51, Arnd Bergmann 写道:
>>> On Fri, Jun 16, 2017 at 8:51 AM, Bu Tao <butao@...ilicon.com> wrote:
>>>> +Optional properties for board device:
>>>> +- ufs-hi3660-use-rate-B : specifies UFS rate-B
>>>> +- ufs-hi3660-broken-fastauto : specifies no fastauto
>>>> +- ufs-hi3660-use-HS-GEAR3 : specifies UFS HS-GEAR3
>>>> +- ufs-hi3660-use-HS-GEAR2 : specifies UFS HS-GEAR2
>>>> +- ufs-hi3660-use-HS-GEAR1 : specifies UFS HS-GEAR1
>>>> +- ufs-hi3660-broken-clk-gate-bypass : specifies no clk-gate
>>>> +- ufs-hi3660-use-one-line : specifies UFS use one line work
>>>> +- reset-gpio : specifies to reset devices
>>>
>>>
>>> Some of these sound rather generic and might apply to UFS
>>> implementations
>>> other than hi3660, so I'd suggest adding them to the base ufs binding
>>> with
>>> a generic name instead.
>>>
>>> Any DT properties that might be useful across multiple
>>> implementations
>>> should be parsed in generic code that gets called by the individual
>>> drivers,
>>> and then the properties that are specific to the integration work
>>> done by
>>> hisilicon should be prefixed with "hisilicon,", but not normally with
>>> the
>>> SoC name: it is quite possible that another SoC will be derived from
>>> this
>>> chip and it should reuse the properties.
>>
>>
>> I do not know wheher other SoC need to use the optional properties as
>> abover. So here the name of the optional properties has "hi3660".
>
> They should not have "hi3660" in their names either way, independent
> of where they are used.
Yes, i agree with Arnd that SoCs might also need these so please make
these properties generic (put them under
Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt) and also move
their parsing code in generic driver (ufshcd.c or ufshcd-pltfrm.c).
>
>>> (note: this is different from the value of the "compatible" property
>>> that
>>> is meant to be as specific as possible".
>>>
>>> Also, please clarify how your binding relates to the ufshcd binding
>>> in Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt: does
>>> hi3660 implement any registers that are shared with ufshcd, or does
>>> it use the same physical interface with a different register set?
>>
>> No, only show how to use the dt-binding for hi3660 SoC
>
> My question was about the hardware: does hi3660 implement ufshcd
> or not?
>
> Arnd
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists