lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 25 Jun 2017 22:25:36 +0200
From:   Ondrej Zary <linux@...nbow-software.org>
To:     linux-ide@...r.kernel.org
Cc:     Tejun Heo <tj@...nel.org>,
        Kernel development list <linux-kernel@...r.kernel.org>
Subject: [PATCH] sata_via: Enable optional hotplug on VT6420

VT6420 seems to have the same hotplug capability as VT6421.

However, enabling hotplug needs to expose SCR registers which can cause
problems. It works for me but might break elsewhere. So add a module
parameter vt6420_hotplug to enable this feature.

Signed-off-by: Ondrej Zary <linux@...nbow-software.org>
---
 drivers/ata/sata_via.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f3f538eec7b3..50d1c1b1131c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -80,6 +80,10 @@ struct svia_priv {
 	bool			wd_workaround;
 };
 
+static int vt6420_hotplug;
+module_param_named(vt6420_hotplug, vt6420_hotplug, int, 0644);
+MODULE_PARM_DESC(vt6420_hotplug, "Enable hot-plug support for VT6420 (0=Don't support, 1=support)");
+
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 #ifdef CONFIG_PM_SLEEP
 static int svia_pci_device_resume(struct pci_dev *pdev);
@@ -473,6 +477,11 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
+	if (vt6420_hotplug) {
+		ppi[0]->port_ops->scr_read = svia_scr_read;
+		ppi[0]->port_ops->scr_write = svia_scr_write;
+	}
+
 	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
@@ -556,7 +565,7 @@ static void svia_wd_fix(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2));
 }
 
-static irqreturn_t vt6421_interrupt(int irq, void *dev_instance)
+static irqreturn_t vt642x_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
 	irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance);
@@ -644,7 +653,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
 
-	if (board_id == vt6421) {
+	if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421) {
 		/* enable IRQ on hotplug */
 		pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
 		if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
@@ -744,8 +753,8 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	svia_configure(pdev, board_id, hpriv);
 
 	pci_set_master(pdev);
-	if (board_id == vt6421)
-		return ata_host_activate(host, pdev->irq, vt6421_interrupt,
+	if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421)
+		return ata_host_activate(host, pdev->irq, vt642x_interrupt,
 					 IRQF_SHARED, &svia_sht);
 	else
 		return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
-- 
Ondrej Zary

Powered by blists - more mailing lists