lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1498481318-1894-3-git-send-email-bich.hemon@st.com>
Date:   Mon, 26 Jun 2017 12:49:09 +0000
From:   Bich HEMON <bich.hemon@...com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre TORGUE <alexandre.torgue@...com>,
        "Jiri Slaby" <jslaby@...e.com>,
        "linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     Bich HEMON <bich.hemon@...com>
Subject: [PATCH 02/20] dt-bindings: serial: each stm32 usart needs an alias

From: Bich Hemon <bich.hemon@...com>

Each usart controller should have an alias correctly
numbered in "aliases" node.

Signed-off-by: Gerald Baeza <gerald.baeza@...com>
---
 Documentation/devicetree/bindings/serial/st,stm32-usart.txt | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 85ec5f2..a229b14 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -15,14 +15,23 @@ Optional properties:
 - dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt
 - dma-names: "rx" and/or "tx"
 
+Note: Each usart controller should have an alias correctly numbered
+in "aliases" node.
+
 Examples:
-usart4: serial@...04c00 {
+aliases {
+	serial0 = &usart1;
+	serial1 = &usart2;
+	serial3 = &uart4;
+};
+
+uart4: serial@...04c00 {
 	compatible = "st,stm32-uart";
 	reg = <0x40004c00 0x400>;
 	interrupts = <52>;
 	clocks = <&clk_pclk1>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart4>;
+	pinctrl-0 = <&pinctrl_uart4>;
 };
 
 usart2: serial@...04400 {
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ