| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d3a9005c-aa31-24d3-7cec-eb8ac97e2ad9@gmail.com>
Date: Tue, 27 Jun 2017 11:54:52 +0200
From: Marek Vasut <marek.vasut@...il.com>
To: linux-renesas-soc@...r.kernel.org
Cc: lee.jones@...aro.org, Marek Vasut <marek.vasut+renesas@...il.com>,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: Re: [PATCH V3 2/2] mfd: Add ROHM BD9571MWV-M MFD PMIC driver
On 05/02/2017 02:18 PM, Marek Vasut wrote:
> Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS
> entry. The MFD part only specifies the regmap bits for the PMIC and
> binds the subdevs together.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@...il.com>
> Cc: linux-kernel@...r.kernel.org
> Cc: Geert Uytterhoeven <geert+renesas@...der.be>
> Cc: Lee Jones <lee.jones@...aro.org>
Lee, bump, do you plan to apply these patches anytime soon ?
> ---
> V2: - Change BD9571MWV_AVS_VD09_VID0,1,2,3 to BD9571MWV_AVS_VD09_VID(n)
> - Change BD9571MWV_AVS_DVFS_VID0,1,2,3 to BD9571MWV_AVS_DVFS_VID(n)
> - Make the AVS_VD09 range RW, so it can be used by the regulator
> driver for the VD09 regulator
> - Report the regmap read return values when attempting to read ID
> registers fails
> V3: No change
> ---
> MAINTAINERS | 11 ++
> drivers/mfd/Kconfig | 13 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/bd9571mwv.c | 230 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/bd9571mwv.h | 115 +++++++++++++++++++++
> 5 files changed, 370 insertions(+)
> create mode 100644 drivers/mfd/bd9571mwv.c
> create mode 100644 include/linux/mfd/bd9571mwv.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2a9aa4be5846..9c30e6b00358 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10942,6 +10942,17 @@ L: linux-serial@...r.kernel.org
> S: Odd Fixes
> F: drivers/tty/serial/rp2.*
>
> +ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
> +M: Marek Vasut <marek.vasut+renesas@...il.com>
> +L: linux-kernel@...r.kernel.org
> +L: linux-renesas-soc@...r.kernel.org
> +S: Supported
> +F: drivers/mfd/bd9571mwv.c
> +F: drivers/regulator/bd9571mwv-regulator.c
> +F: drivers/gpio/gpio-bd9571mwv.c
> +F: include/linux/mfd/bd9571mwv.h
> +F: Documentation/devicetree/bindings/mfd/bd9571mwv.txt
> +
> ROSE NETWORK LAYER
> M: Ralf Baechle <ralf@...ux-mips.org>
> L: linux-hams@...r.kernel.org
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93595f6..6f4668ae28cc 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -133,6 +133,19 @@ config MFD_BCM590XX
> help
> Support for the BCM590xx PMUs from Broadcom
>
> +config MFD_BD9571MWV
> + tristate "ROHM BD9571MWV PMIC"
> + select MFD_CORE
> + select REGMAP_I2C
> + depends on I2C
> + help
> + Support for the ROHM BD9571MWV PMIC, which contains single
> + voltage regulator, voltage sampling units, GPIO block and
> + watchdog block.
> +
> + This driver can also be built as a module. If so, the module
> + will be called bd9571mwv.
> +
> config MFD_AC100
> tristate "X-Powers AC100"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1ea0ea9..3cacc9748e13 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
> obj-$(CONFIG_MFD_SM501) += sm501.o
> obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> +obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o
> cros_ec_core-objs := cros_ec.o
> cros_ec_core-$(CONFIG_ACPI) += cros_ec_acpi_gpe.o
> obj-$(CONFIG_MFD_CROS_EC) += cros_ec_core.o
> diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
> new file mode 100644
> index 000000000000..64e088dfe7b0
> --- /dev/null
> +++ b/drivers/mfd/bd9571mwv.c
> @@ -0,0 +1,230 @@
> +/*
> + * ROHM BD9571MWV-M MFD driver
> + *
> + * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65086 driver
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +
> +#include <linux/mfd/bd9571mwv.h>
> +
> +static const struct mfd_cell bd9571mwv_cells[] = {
> + { .name = "bd9571mwv-regulator", },
> + { .name = "bd9571mwv-gpio", },
> +};
> +
> +static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
> + regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
> + regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
> + regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
> + regmap_reg_range(BD9571MWV_DVFS_SETVMAX, BD9571MWV_DVFS_MONIVDAC),
> + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
> + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
> +};
> +
> +static const struct regmap_access_table bd9571mwv_readable_table = {
> + .yes_ranges = bd9571mwv_readable_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_readable_yes_ranges),
> +};
> +
> +static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
> + regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
> + regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
> + regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
> +};
> +
> +static const struct regmap_access_table bd9571mwv_writable_table = {
> + .yes_ranges = bd9571mwv_writable_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_writable_yes_ranges),
> +};
> +
> +static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
> + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
> + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
> + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
> +};
> +
> +static const struct regmap_access_table bd9571mwv_volatile_table = {
> + .yes_ranges = bd9571mwv_volatile_yes_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_volatile_yes_ranges),
> +};
> +
> +static const struct regmap_config bd9571mwv_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &bd9571mwv_readable_table,
> + .wr_table = &bd9571mwv_writable_table,
> + .volatile_table = &bd9571mwv_volatile_table,
> + .max_register = 0xff,
> +};
> +
> +static const struct regmap_irq bd9571mwv_irqs[] = {
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD1, 0,
> + BD9571MWV_INT_INTREQ_MD1_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E1, 0,
> + BD9571MWV_INT_INTREQ_MD2_E1_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E2, 0,
> + BD9571MWV_INT_INTREQ_MD2_E2_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_PROT_ERR, 0,
> + BD9571MWV_INT_INTREQ_PROT_ERR_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_GP, 0,
> + BD9571MWV_INT_INTREQ_GP_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_128H_OF, 0,
> + BD9571MWV_INT_INTREQ_128H_OF_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_WDT_OF, 0,
> + BD9571MWV_INT_INTREQ_WDT_OF_INT),
> + REGMAP_IRQ_REG(BD9571MWV_IRQ_BKUP_TRG, 0,
> + BD9571MWV_INT_INTREQ_BKUP_TRG_INT),
> +};
> +
> +static struct regmap_irq_chip bd9571mwv_irq_chip = {
> + .name = "bd9571mwv",
> + .status_base = BD9571MWV_INT_INTREQ,
> + .mask_base = BD9571MWV_INT_INTMASK,
> + .ack_base = BD9571MWV_INT_INTREQ,
> + .init_ack_masked = true,
> + .num_regs = 1,
> + .irqs = bd9571mwv_irqs,
> + .num_irqs = ARRAY_SIZE(bd9571mwv_irqs),
> +};
> +
> +static int bd9571mwv_identify(struct bd9571mwv *bd)
> +{
> + struct device *dev = bd->dev;
> + unsigned int value;
> + int ret;
> +
> + ret = regmap_read(bd->regmap, BD9571MWV_VENDOR_CODE, &value);
> + if (ret) {
> + dev_err(dev, "Failed to read vendor code register (ret=%i)\n",
> + ret);
> + return ret;
> + }
> +
> + if (value != BD9571MWV_VENDOR_CODE_VAL) {
> + dev_err(dev, "Invalid vendor code ID %02x (expected %02x)\n",
> + value, BD9571MWV_VENDOR_CODE_VAL);
> + return -EINVAL;
> + }
> +
> + ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_CODE, &value);
> + if (ret) {
> + dev_err(dev, "Failed to read product code register (ret=%i)\n",
> + ret);
> + return ret;
> + }
> +
> + if (value != BD9571MWV_PRODUCT_CODE_VAL) {
> + dev_err(dev, "Invalid product code ID %02x (expected %02x)\n",
> + value, BD9571MWV_PRODUCT_CODE_VAL);
> + return -EINVAL;
> + }
> +
> + ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_REVISION, &value);
> + if (ret) {
> + dev_err(dev, "Failed to read revision register (ret=%i)\n",
> + ret);
> + return ret;
> + }
> +
> + dev_info(dev, "Device: BD9571MWV rev. %d\n", value & 0xff);
> +
> + return 0;
> +}
> +
> +static int bd9571mwv_probe(struct i2c_client *client,
> + const struct i2c_device_id *ids)
> +{
> + struct bd9571mwv *bd;
> + int ret;
> +
> + bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
> + if (!bd)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, bd);
> + bd->dev = &client->dev;
> + bd->irq = client->irq;
> +
> + bd->regmap = devm_regmap_init_i2c(client, &bd9571mwv_regmap_config);
> + if (IS_ERR(bd->regmap)) {
> + dev_err(bd->dev, "Failed to initialize register map\n");
> + return PTR_ERR(bd->regmap);
> + }
> +
> + ret = bd9571mwv_identify(bd);
> + if (ret)
> + return ret;
> +
> + ret = regmap_add_irq_chip(bd->regmap, bd->irq, IRQF_ONESHOT, 0,
> + &bd9571mwv_irq_chip, &bd->irq_data);
> + if (ret) {
> + dev_err(bd->dev, "Failed to register IRQ chip\n");
> + return ret;
> + }
> +
> + ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO, bd9571mwv_cells,
> + ARRAY_SIZE(bd9571mwv_cells), NULL, 0,
> + regmap_irq_get_domain(bd->irq_data));
> + if (ret) {
> + regmap_del_irq_chip(bd->irq, bd->irq_data);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int bd9571mwv_remove(struct i2c_client *client)
> +{
> + struct bd9571mwv *bd = i2c_get_clientdata(client);
> +
> + regmap_del_irq_chip(bd->irq, bd->irq_data);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id bd9571mwv_of_match_table[] = {
> + { .compatible = "rohm,bd9571mwv", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
> +
> +static const struct i2c_device_id bd9571mwv_id_table[] = {
> + { "bd9571mwv", 0 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table);
> +
> +static struct i2c_driver bd9571mwv_driver = {
> + .driver = {
> + .name = "bd9571mwv",
> + .of_match_table = bd9571mwv_of_match_table,
> + },
> + .probe = bd9571mwv_probe,
> + .remove = bd9571mwv_remove,
> + .id_table = bd9571mwv_id_table,
> +};
> +module_i2c_driver(bd9571mwv_driver);
> +
> +MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@...il.com>");
> +MODULE_DESCRIPTION("BD9571MWV PMIC Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h
> new file mode 100644
> index 000000000000..f0708ba4cbba
> --- /dev/null
> +++ b/include/linux/mfd/bd9571mwv.h
> @@ -0,0 +1,115 @@
> +/*
> + * ROHM BD9571MWV-M driver
> + *
> + * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65086 driver
> + */
> +
> +#ifndef __LINUX_MFD_BD9571MWV_H
> +#define __LINUX_MFD_BD9571MWV_H
> +
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +/* List of registers for BD9571MWV */
> +#define BD9571MWV_VENDOR_CODE 0x00
> +#define BD9571MWV_VENDOR_CODE_VAL 0xdb
> +#define BD9571MWV_PRODUCT_CODE 0x01
> +#define BD9571MWV_PRODUCT_CODE_VAL 0x60
> +#define BD9571MWV_PRODUCT_REVISION 0x02
> +
> +#define BD9571MWV_I2C_FUSA_MODE 0x10
> +#define BD9571MWV_I2C_MD2_E1_BIT_1 0x11
> +#define BD9571MWV_I2C_MD2_E1_BIT_2 0x12
> +
> +#define BD9571MWV_BKUP_MODE_CNT 0x20
> +#define BD9571MWV_BKUP_MODE_STATUS 0x21
> +#define BD9571MWV_BKUP_RECOVERY_CNT 0x22
> +#define BD9571MWV_BKUP_CTRL_TIM_CNT 0x23
> +#define BD9571MWV_WAITBKUP_WDT_CNT 0x24
> +#define BD9571MWV_128H_TIM_CNT 0x26
> +#define BD9571MWV_QLLM_CNT 0x27
> +
> +#define BD9571MWV_AVS_SET_MONI 0x31
> +#define BD9571MWV_AVS_SET_MONI_MASK 0x3
> +#define BD9571MWV_AVS_VD09_VID(n) (0x32 + (n))
> +#define BD9571MWV_AVS_DVFS_VID(n) (0x36 + (n))
> +
> +#define BD9571MWV_VD18_VID 0x42
> +#define BD9571MWV_VD25_VID 0x43
> +#define BD9571MWV_VD33_VID 0x44
> +
> +#define BD9571MWV_DVFS_VINIT 0x50
> +#define BD9571MWV_DVFS_SETVMAX 0x52
> +#define BD9571MWV_DVFS_BOOSTVID 0x53
> +#define BD9571MWV_DVFS_SETVID 0x54
> +#define BD9571MWV_DVFS_MONIVDAC 0x55
> +#define BD9571MWV_DVFS_PGD_CNT 0x56
> +
> +#define BD9571MWV_GPIO_DIR 0x60
> +#define BD9571MWV_GPIO_OUT 0x61
> +#define BD9571MWV_GPIO_IN 0x62
> +#define BD9571MWV_GPIO_DEB 0x63
> +#define BD9571MWV_GPIO_INT_SET 0x64
> +#define BD9571MWV_GPIO_INT 0x65
> +#define BD9571MWV_GPIO_INTMASK 0x66
> +
> +#define BD9571MWV_REG_KEEP(n) (0x70 + (n))
> +
> +#define BD9571MWV_PMIC_INTERNAL_STATUS 0x80
> +#define BD9571MWV_PROT_ERROR_STATUS0 0x81
> +#define BD9571MWV_PROT_ERROR_STATUS1 0x82
> +#define BD9571MWV_PROT_ERROR_STATUS2 0x83
> +#define BD9571MWV_PROT_ERROR_STATUS3 0x84
> +#define BD9571MWV_PROT_ERROR_STATUS4 0x85
> +
> +#define BD9571MWV_INT_INTREQ 0x90
> +#define BD9571MWV_INT_INTREQ_MD1_INT BIT(0)
> +#define BD9571MWV_INT_INTREQ_MD2_E1_INT BIT(1)
> +#define BD9571MWV_INT_INTREQ_MD2_E2_INT BIT(2)
> +#define BD9571MWV_INT_INTREQ_PROT_ERR_INT BIT(3)
> +#define BD9571MWV_INT_INTREQ_GP_INT BIT(4)
> +#define BD9571MWV_INT_INTREQ_128H_OF_INT BIT(5)
> +#define BD9571MWV_INT_INTREQ_WDT_OF_INT BIT(6)
> +#define BD9571MWV_INT_INTREQ_BKUP_TRG_INT BIT(7)
> +#define BD9571MWV_INT_INTMASK 0x91
> +
> +#define BD9571MWV_ACCESS_KEY 0xff
> +
> +/* Define the BD9571MWV IRQ numbers */
> +enum bd9571mwv_irqs {
> + BD9571MWV_IRQ_MD1,
> + BD9571MWV_IRQ_MD2_E1,
> + BD9571MWV_IRQ_MD2_E2,
> + BD9571MWV_IRQ_PROT_ERR,
> + BD9571MWV_IRQ_GP,
> + BD9571MWV_IRQ_128H_OF,
> + BD9571MWV_IRQ_WDT_OF,
> + BD9571MWV_IRQ_BKUP_TRG,
> +};
> +
> +/**
> + * struct bd9571mwv - state holder for the bd9571mwv driver
> + *
> + * Device data may be used to access the BD9571MWV chip
> + */
> +struct bd9571mwv {
> + struct device *dev;
> + struct regmap *regmap;
> +
> + /* IRQ Data */
> + int irq;
> + struct regmap_irq_chip_data *irq_data;
> +};
> +
> +#endif /* __LINUX_MFD_BD9571MWV_H */
>
--
Best regards,
Marek Vasut
Powered by blists - more mailing lists