Message-ID: <852b819d-ea7a-4854-cae1-3857cf92930d@gmail.com>
Date:   Tue, 27 Jun 2017 11:48:57 +0200
From:   Marek Vasut <marek.vasut@...il.com>
To:     matthew.gerlach@...ux.intel.com, vndao@...era.com,
        dwmw2@...radead.org, computersforpeace@...il.com,
        boris.brezillon@...e-electrons.com, richard@....at,
        cyrille.pitchen@...ev4u.fr, robh+dt@...nel.org,
        mark.rutland@....com, linux-mtd@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        gregkh@...uxfoundation.org, davem@...emloft.net, mchehab@...nel.org
Subject: Re: [PATCH 2/3] mtd: spi-nor: core code for the Altera Quadspi Flash
 Controller v2

On 06/26/2017 06:13 PM, matthew.gerlach@...ux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
> 
> Signed-off-by: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
> ---
>  MAINTAINERS                          |   7 +
>  drivers/mtd/spi-nor/Kconfig          |   5 +
>  drivers/mtd/spi-nor/Makefile         |   4 +-
>  drivers/mtd/spi-nor/altera-quadspi.c | 676 +++++++++++++++++++++++++++++++++++
>  include/linux/mtd/altera-quadspi.h   |  28 ++
>  5 files changed, 719 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/mtd/spi-nor/altera-quadspi.c
>  create mode 100644 include/linux/mtd/altera-quadspi.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6b4395c..ae33fa6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -648,6 +648,13 @@ L:	linux-gpio@...r.kernel.org
>  S:	Maintained
>  F:	drivers/gpio/gpio-altera.c
>  
> +ALTERA QUADSPI FLASH DRIVER
> +M:	Matthew Gerlach <matthew.gerlach@...ux.intel.com>
> +L:	linux-mtd@...ts.infradead.org
> +S:	Maintained
> +F:	drivers/mtd/spi-nor/altera-quadspi.c
> +F:	inclulde/linux/mtd/altera-quadspi.h
> +
>  ALTERA SYSTEM RESOURCE DRIVER FOR ARRIA10 DEVKIT
>  M:	Thor Thayer <thor.thayer@...ux.intel.com>
>  S:	Maintained
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> index 293c8a4..89fe425 100644
> --- a/drivers/mtd/spi-nor/Kconfig
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -113,4 +113,9 @@ config SPI_STM32_QUADSPI
>  	  This enables support for the STM32 Quad SPI controller.
>  	  We only connect the NOR to this controller.
>  
> +config SPI_ALTERA_QUADSPI
> +        tristate "Altera Quad SPI Flash Controller II"
> +        help
> +          Enable support for version 2 of Altera Quad SPI Flash Controller.

Some more description would be useful.

>  endif # MTD_SPI_NOR
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 285aab8..024c6ac 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -8,4 +8,6 @@ obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
>  obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
>  obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
>  obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
> -obj-$(CONFIG_SPI_STM32_QUADSPI)	+= stm32-quadspi.o
> \ No newline at end of file
> +obj-$(CONFIG_SPI_STM32_QUADSPI)	+= stm32-quadspi.o
> +obj-$(CONFIG_SPI_ALTERA_QUADSPI) += altera-quadspi.o

Keep the list sorted

> diff --git a/drivers/mtd/spi-nor/altera-quadspi.c b/drivers/mtd/spi-nor/altera-quadspi.c
> new file mode 100644
> index 0000000..de65453
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/altera-quadspi.c
> @@ -0,0 +1,676 @@
> +/*
> + * Copyright (C) 2014 Altera Corporation. All rights reserved.
> + * Copyright (C) 2017 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +

One newline too many

> +#include <linux/bitrev.h>
> +#include <linux/module.h>
> +#include <linux/mtd/altera-quadspi.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/spi-nor.h>
> +
> +#define ALTERA_QUADSPI_RESOURCE_NAME			"altera_quadspi"
> +
> +#define EPCS_OPCODE_ID					1
> +#define NON_EPCS_OPCODE_ID				2
> +
> +#define WRITE_CHECK					1
> +#define ERASE_CHECK					0
> +
> +#define QUADSPI_SR_REG					0x0
> +#define QUADSPI_SR_MASK					0x0000000F
> +
> +/* defines for device id register */
> +#define QUADSPI_SID_REG					0x4
> +#define QUADSPI_RDID_REG				0x8
> +#define QUADSPI_ID_MASK					0x000000FF
> +
> +/*
> + * QUADSPI_MEM_OP register offset
> + *
> + * The QUADSPI_MEM_OP register is used to do memory protect and erase operations
> + *
> + */
> +#define QUADSPI_MEM_OP_REG				0xC
> +
> +#define QUADSPI_MEM_OP_CMD_MASK				0x00000003
> +#define QUADSPI_MEM_OP_BULK_ERASE_CMD			0x00000001
> +#define QUADSPI_MEM_OP_SECTOR_ERASE_CMD			0x00000002
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_CMD		0x00000003
> +#define QUADSPI_MEM_OP_SECTOR_WRITE_ENABLE_CMD		0x00000004
> +#define QUADSPI_MEM_OP_SECTOR_VALUE_MASK		0x0003FF00
> +
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_SHIFT		8
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK	0x00001F00
> +/*
> + * QUADSPI_ISR register offset
> + *
> + * The QUADSPI_ISR register is used to determine whether an invalid write or
> + * erase operation trigerred an interrupt
> + *
> + */
> +#define QUADSPI_ISR_REG					0x10
> +
> +#define QUADSPI_ISR_ILLEGAL_ERASE_MASK			0x00000001
> +#define QUADSPI_ISR_ILLEGAL_WRITE_MASK			0x00000002
> +
> +/*
> + * QUADSPI_IMR register offset
> + *
> + * The QUADSPI_IMR register is used to mask the invalid erase or the invalid
> + * write interrupts.
> + *
> + */
> +#define QUADSPI_IMR_REG					0x14
> +#define QUADSPI_IMR_ILLEGAL_ERASE_MASK			0x00000001
> +
> +#define QUADSPI_IMR_ILLEGAL_WRITE_MASK			0x00000002
> +
> +#define QUADSPI_CHIP_SELECT_REG				0x18
> +#define QUADSPI_CHIP_SELECT_MASK			0x00000007
> +#define QUADSPI_CHIP_SELECT_0				0x00000001
> +#define QUADSPI_CHIP_SELECT_1				0x00000002
> +#define QUADSPI_CHIP_SELECT_2				0x00000004

BIT() ?

> +#define QUADSPI_FLAG_STATUS_REG				0x1C
> +#define QUADSPI_DEV_ID_DATA_0				0x20
> +#define QUADSPI_DEV_ID_DATA_1				0x24
> +#define QUADSPI_DEV_ID_DATA_2				0x28
> +#define QUADSPI_DEV_ID_DATA_3				0x2C
> +#define QUADSPI_DEV_ID_DATA_4				0x30
> +
> +#define QUADSPI_WIN_OCC_REG				0x4
> +#define QUADSPI_WIN_OCC_SFT				24
> +
> +#define QUADSPI_WIN_SEL_REG				0x8
> +
> +struct altera_quadspi {
> +	u32 opcode_id;
> +	void __iomem *csr_base;
> +	void __iomem *data_base;
> +	void __iomem *window_base;
> +	size_t window_size;
> +	u32 num_flashes;
> +	u32 flags;
> +	struct device *dev;
> +	struct altera_quadspi_flash *flash[ALTERA_QUADSPI_MAX_NUM_FLASH_CHIP];
> +	struct device_node *np[ALTERA_QUADSPI_MAX_NUM_FLASH_CHIP];

Is this np even necessary ? Or why don't you put it into
altera_quadspi_flash {} ?

> +};
> +
> +struct altera_quadspi_flash {
> +	struct spi_nor nor;
> +	struct altera_quadspi *q;
> +	u32 bank;
> +};
> +
> +struct flash_device {
> +	char *name;
> +	u32 opcode_id;
> +	u32 device_id;
> +};
> +
> +#ifdef DEBUG

Yet another magic NIH readl/writel debug ... sigh, drop it.

> +static inline u32 alt_qspi_readl(void __iomem *base, off_t offset)
> +{
> +	u32 val = readl(base + offset);
> +
> +	pr_info("%s 0x%x from offset 0x%lx\n", __func__, val, offset);
> +	return val;
> +}
> +static inline void alt_qspi_writel(u32 val, void __iomem *base, off_t offset)
> +{
> +	writel(val, base + offset);
> +	pr_info("%s 0x%x to offset 0x%lx\n", __func__, val, offset);
> +}
> +#else
> +#define alt_qspi_readl(base, offset) readl(base+offset)
> +#define alt_qspi_writel(val, base, offset) writel(val, base + offset)

This use of macros is wrong, but it'll be dropped anyway ...

> +#endif
> +
> +static void altera_quadspi_chip_select(struct altera_quadspi *q, u32 bank)
> +{
> +	u32 val = 0;
> +
> +	switch (bank) {
> +	case 0:
> +		val = QUADSPI_CHIP_SELECT_0;
> +		break;
> +	case 1:
> +		val = QUADSPI_CHIP_SELECT_1;
> +		break;
> +	case 2:
> +		val = QUADSPI_CHIP_SELECT_2;
> +		break;
> +	default:
> +		dev_err(q->dev, "invalid bank\n");
> +		return;
> +	}

So this is basically
switch ...
case 0:
 return BIT(0);
case 1:
 return BIT(1);
 ...

This can be simplified, right ? :)

> +	alt_qspi_writel(val, q->csr_base, QUADSPI_CHIP_SELECT_REG);
> +}
> +
> +static int altera_quadspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *val,
> +				    int len)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +
> +	altera_quadspi_chip_select(q, flash->bank);

Look at the mutex usage in cadence qspi driver ; if you have multiple
flashes and you access both at the same time, you'll run into a nasty
race if you don't have that locking in place. UBI on both can trigger
that. Look for "bus_mutex" in that driver.

> +	switch (opcode) {
> +	case SPINOR_OP_WREN:
> +		dev_dbg(q->dev, "%s enabling write\n", __func__);
> +		alt_qspi_writel(QUADSPI_MEM_OP_SECTOR_WRITE_ENABLE_CMD,
> +				q->csr_base, QUADSPI_MEM_OP_REG);
> +		break;
> +
> +	case SPINOR_OP_CHIP_ERASE:
> +		alt_qspi_writel(QUADSPI_MEM_OP_BULK_ERASE_CMD,
> +				q->csr_base, QUADSPI_MEM_OP_REG);
> +		break;
> +
> +	default:
> +		dev_dbg(q->dev, "%s UNHANDLED write_reg 0x%x\n",
> +			__func__, opcode);
> +
> +	}
> +
> +	return 0;
> +}
> +
> +static int altera_quadspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *val,
> +				   int len)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	u32 data = 0;
> +
> +	memset(val, 0, len);
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	switch (opcode) {
> +	case SPINOR_OP_RDSR:
> +		data = alt_qspi_readl(q->csr_base, QUADSPI_SR_REG);
> +		dev_dbg(q->dev, "%s RDSR 0x%x\n", __func__, data);
> +		*val = (u8)data & QUADSPI_SR_MASK;
> +		break;
> +	case SPINOR_OP_RDID:
> +		if (q->opcode_id == EPCS_OPCODE_ID)
> +			data = alt_qspi_readl(q->csr_base, QUADSPI_SID_REG);
> +		else
> +			data = alt_qspi_readl(q->csr_base, QUADSPI_RDID_REG);
> +
> +		*((u32 *)val) = data;

What are these awful casts ?

> +		break;
> +	case SPINOR_OP_RDFSR:
> +		data = alt_qspi_readl(q->csr_base, QUADSPI_FLAG_STATUS_REG);
> +		dev_dbg(q->dev, "%s RDFSR 0x%x\n", __func__, data);
> +		*val = (u8)(data & 0xff);
> +		break;
> +	default:
> +		dev_dbg(q->dev, "%s UNHANDLED read_reg 0x%x\n",
> +			__func__, opcode);
> +		*val = 0;
> +		break;
> +	}
> +	return 0;
> +}
> +
> +static int altera_quadspi_write_erase_check(struct spi_nor *nor,
> +					    bool write_erase)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	u32 val;
> +	u32 mask;
> +
> +	if (write_erase)
> +		mask = QUADSPI_ISR_ILLEGAL_WRITE_MASK;
> +	else
> +		mask = QUADSPI_ISR_ILLEGAL_ERASE_MASK;
> +
> +	val = alt_qspi_readl(q->csr_base, QUADSPI_ISR_REG);
> +
> +	if (val & mask) {
> +		dev_err(nor->dev,
> +			"write/erase failed, sector might be protected\n");
> +		alt_qspi_writel(0, q->csr_base, QUADSPI_FLAG_STATUS_REG);
> +
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int altera_quadspi_addr_to_sector(struct mtd_info *mtd, uint64_t offset)
> +{
> +	if (mtd->erasesize_shift)
> +		return offset >> mtd->erasesize_shift;
> +	do_div(offset, mtd->erasesize);
> +	return offset;
> +}
> +
> +static int altera_quadspi_erase(struct spi_nor *nor, loff_t offset)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	struct mtd_info *mtd = &nor->mtd;
> +	u32 val;
> +	int sector_value;
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	sector_value = altera_quadspi_addr_to_sector(mtd, offset);
> +
> +	dev_dbg(q->dev, "%s sector %d\n", __func__, sector_value);
> +
> +	if (sector_value < 0)
> +		return -EINVAL;
> +
> +	val = (sector_value << 8) & QUADSPI_MEM_OP_SECTOR_VALUE_MASK;
> +
> +	val |= QUADSPI_MEM_OP_SECTOR_ERASE_CMD;
> +
> +	alt_qspi_writel(val, q->csr_base, QUADSPI_MEM_OP_REG);
> +
> +	dev_dbg(q->dev, "%s SR=0x%x FSR=0x%x\n", __func__,
> +		alt_qspi_readl(q->csr_base, QUADSPI_SR_REG),
> +		alt_qspi_readl(q->csr_base, QUADSPI_FLAG_STATUS_REG));
> +
> +	return altera_quadspi_write_erase_check(nor, ERASE_CHECK);
> +}
> +
> +#define WINDOW_ALIGN 4
> +#define WINDOW_MASK (WINDOW_ALIGN - 1)

What are these undocumented macros in the middle of the code ?

> +static ssize_t altera_quadspi_windowed_read(struct altera_quadspi *q,
> +					    loff_t from,
> +					    size_t len, u_char *buf)
> +{
> +	size_t bytes_left = len;
> +	size_t bytes_to_read, i;
> +	loff_t next_window_off;
> +	u64 start_window;
> +	u32 window;
> +	u32 *dst;
> +
> +	if ((from & WINDOW_MASK) || (len & WINDOW_MASK) ||
> +	    !IS_ALIGNED((unsigned long)buf, WINDOW_ALIGN)) {
> +		dev_err(q->dev, "%s only 32 bit aligned accesses allowed\n",
> +			__func__);
> +		return 0;
> +	}
> +
> +	start_window = from;
> +	do_div(start_window, q->window_size);
> +	window = (u32)(start_window & 0xffffffff);
> +
> +	next_window_off = (window + 1) * q->window_size;
> +
> +	while (bytes_left > 0) {
> +
> +		writel(window, q->window_base + QUADSPI_WIN_SEL_REG);
> +
> +		bytes_to_read = min((size_t)bytes_left,
> +				    (size_t)(next_window_off - from));
> +
> +		dev_dbg(q->dev,
> +			"window%u fr0x%llx next0x%llx left%zu num0x%zx\n",
> +			window,  from, next_window_off, bytes_left,
> +			bytes_to_read);
> +
> +		dst = (u32 *)buf;
> +		for (i = 0; i < bytes_to_read; i += 4, dst++)
> +			*dst = readl(q->data_base +
> +				     (from & (q->window_size - 1)) + i);

ioread32_rep and co. ? Again, look at the CQSPI driver.

> +		bytes_left -= bytes_to_read;
> +		buf += bytes_to_read;
> +		from += bytes_to_read;
> +		window++;
> +		next_window_off += q->window_size;
> +	}
> +
> +	return len;
> +}
> +static ssize_t altera_quadspi_windowed_write(struct altera_quadspi *q,
> +					     loff_t to, size_t len,
> +					     const u_char *buf)
> +{
> +	size_t bytes_left = len;
> +	u32 window_mask = q->window_size - 1;
> +	u32 read_back;
> +	size_t bytes_to_write, i;
> +	loff_t next_window_off;
> +	u64 start_window;
> +	u32 window;
> +	const u32 *src;
> +	u32 words_can_write;
> +
> +	if ((to & WINDOW_MASK) || (len & WINDOW_MASK) ||
> +	    !IS_ALIGNED((unsigned long)buf, WINDOW_ALIGN)) {
> +		dev_err(q->dev, "%s only 32 bit aligned accesses allowed\n",
> +			__func__);
> +		return 0;
> +	}
> +
> +	start_window = to;
> +	do_div(start_window, q->window_size);
> +	window = (u32)(start_window & 0xffffffff);
> +
> +	next_window_off = (window + 1) * q->window_size;
> +
> +	while (bytes_left > 0) {
> +
> +		writel(window, q->window_base + QUADSPI_WIN_SEL_REG);
> +
> +		bytes_to_write = min((size_t)bytes_left,
> +				    (size_t)(next_window_off - to));
> +
> +		dev_dbg(q->dev,
> +			"window%u to0x%llx next0x%llx left%zu num0x%zx\n",
> +			window,  to, next_window_off, bytes_left,
> +			bytes_to_write);

DTTO , either memcpy_toio or iowrite32_rep

> +		src = (u32 *)buf;
> +		for (i = 0; i < bytes_to_write;) {
> +			words_can_write =
> +				readl(q->window_base + QUADSPI_WIN_OCC_REG) >>
> +				      QUADSPI_WIN_OCC_SFT;
> +			dev_dbg(q->dev, "can write 0x%x\n", words_can_write);
> +
> +			for (; words_can_write > 0; words_can_write--) {
> +				writel(*src,
> +				       q->data_base +
> +				       (to & window_mask) + i);
> +				read_back = readl(q->data_base +
> +						  (to & window_mask) + i);
> +				if (*src != read_back) {
> +					dev_err(q->dev, "%s 0x%x != 0x%x\n",
> +						__func__, *src, read_back);
> +					return (len - bytes_left);
> +				}
> +				i += 4;
> +				src++;
> +			}
> +		}
> +
> +		bytes_left -= bytes_to_write;
> +		buf += bytes_to_write;
> +		to += bytes_to_write;
> +		window++;
> +		next_window_off += q->window_size;
> +	}
> +
> +	return len;
> +}
> +
> +static ssize_t altera_quadspi_read(struct spi_nor *nor, loff_t from, size_t len,
> +				   u_char *buf)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	size_t i;
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	if (q->window_size)
> +		altera_quadspi_windowed_read(q, from, len, buf);
> +	else
> +		memcpy_fromio(buf, q->data_base + from, len);
> +
> +	if (q->flags & ALTERA_QUADSPI_FL_BITREV_READ) {
> +		for (i = 0; i < len; i++, buf++)
> +			*buf = bitrev8(*buf);
> +	}
> +
> +	return len;
> +}
> +
> +static ssize_t altera_quadspi_write(struct spi_nor *nor, loff_t to,
> +				    size_t len, const u_char *buf)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	u_char *bitrev_buf = NULL;
> +	const u_char *src;
> +	u_char *dst;
> +	size_t i;
> +	int ret = 0;
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	if (q->flags & ALTERA_QUADSPI_FL_BITREV_WRITE) {
> +		bitrev_buf = devm_kzalloc(q->dev, len, GFP_KERNEL);
> +		if (!bitrev_buf)
> +			return 0;
> +
> +		src = buf;
> +		dst = bitrev_buf;
> +		for (i = 0; i < len; i++, src++, dst++)
> +			*dst = bitrev8(*src);
> +
> +		buf = bitrev_buf;
> +	}
> +
> +	if (q->window_size)
> +		altera_quadspi_windowed_write(q, to, len, buf);
> +	else
> +		memcpy_toio(q->data_base + to, buf, len);
> +
> +
> +	if (bitrev_buf)
> +		devm_kfree(q->dev, bitrev_buf);
> +
> +	ret = altera_quadspi_write_erase_check(nor, WRITE_CHECK);
> +
> +	return len;
> +
> +}
> +
> +static int altera_quadspi_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	struct mtd_info *mtd = &nor->mtd;
> +	uint32_t offset = ofs;
> +	u32 sector_start, sector_end;
> +	uint64_t num_sectors;
> +	u32 mem_op;
> +	u32 sr_bp;
> +	u32 sr_tb;
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	sector_start = offset;
> +	sector_end = altera_quadspi_addr_to_sector(mtd, offset + len);
> +	num_sectors = mtd->size;
> +	do_div(num_sectors, mtd->erasesize);
> +
> +	dev_dbg(nor->dev, "%s: sector start is %u,sector end is %u\n",
> +		__func__, sector_start, sector_end);
> +
> +	if (sector_start >= num_sectors / 2) {
> +		sr_bp = fls(num_sectors - 1 - sector_start) + 1;
> +		sr_tb = 0;
> +	} else if ((sector_end < num_sectors / 2) &&
> +		  (q->opcode_id != EPCS_OPCODE_ID)) {
> +		sr_bp = fls(sector_end) + 1;
> +		sr_tb = 1;
> +	} else {
> +		sr_bp = 16;
> +		sr_tb = 0;
> +	}
> +
> +	mem_op = (sr_tb << 12) | (sr_bp << 8);
> +	mem_op &= QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
> +	mem_op |= QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
> +
> +	alt_qspi_writel(mem_op, q->csr_base, QUADSPI_MEM_OP_REG);
> +
> +	return 0;
> +}
> +
> +static int altera_quadspi_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> +	struct altera_quadspi_flash *flash = nor->priv;
> +	struct altera_quadspi *q = flash->q;
> +	u32 mem_op;
> +
> +	dev_dbg(nor->dev, "Unlock all protected area\n");
> +
> +	altera_quadspi_chip_select(q, flash->bank);
> +
> +	mem_op = QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
> +	alt_qspi_writel(mem_op, q->csr_base, QUADSPI_MEM_OP_REG);
> +
> +	return 0;
> +}
> +
> +static int altera_quadspi_setup_banks(struct device *dev,
> +				      u32 bank, struct device_node *np)
> +{
> +	struct altera_quadspi *q = dev_get_drvdata(dev);
> +	struct altera_quadspi_flash *flash;
> +	struct spi_nor *nor;
> +	int ret = 0;
> +	char modalias[40] = {0};
> +	struct spi_nor_hwcaps hwcaps = {
> +		.mask = SNOR_HWCAPS_READ |
> +			SNOR_HWCAPS_READ_FAST |
> +			SNOR_HWCAPS_READ_1_1_2 |
> +			SNOR_HWCAPS_READ_1_1_4 |
> +			SNOR_HWCAPS_PP,
> +	};
> +
> +	if (bank > q->num_flashes - 1)
> +		return -EINVAL;
> +
> +	altera_quadspi_chip_select(q, bank);
> +
> +	flash = devm_kzalloc(q->dev, sizeof(*flash), GFP_KERNEL);
> +	if (!flash)
> +		return -ENOMEM;
> +
> +	q->flash[bank] = flash;
> +	nor = &flash->nor;
> +	nor->dev = dev;
> +	nor->priv = flash;
> +	nor->mtd.priv = nor;
> +	flash->q = q;
> +	flash->bank = bank;
> +	spi_nor_set_flash_node(nor, np);
> +
> +	/* spi nor framework*/
> +	nor->read_reg = altera_quadspi_read_reg;
> +	nor->write_reg = altera_quadspi_write_reg;
> +	nor->read = altera_quadspi_read;
> +	nor->write = altera_quadspi_write;
> +	nor->erase = altera_quadspi_erase;
> +	nor->flash_lock = altera_quadspi_lock;
> +	nor->flash_unlock = altera_quadspi_unlock;
> +
> +	/* scanning flash and checking dev id */
> +#ifdef CONFIG_OF
> +	if (np && (of_modalias_node(np, modalias, sizeof(modalias)) < 0))
> +		return -EINVAL;
> +#endif
> +
> +	ret = spi_nor_scan(nor, modalias, &hwcaps);
> +	if (ret) {
> +		dev_err(nor->dev, "flash not found\n");
> +		return ret;
> +	}
> +
> +	ret =  mtd_device_register(&nor->mtd, NULL, 0);
> +
> +	altera_quadspi_unlock(nor, 0, 0);
> +
> +	return ret;
> +}
> +
> +int altera_quadspi_create(struct device *dev, void __iomem *csr_base,
> +			  void __iomem *data_base, void __iomem *window_base,
> +			  size_t window_size, u32 flags)
> +{
> +	struct altera_quadspi *q;
> +
> +	q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
> +	if (!q)
> +		return -ENOMEM;
> +
> +	q->dev = dev;
> +	q->csr_base = csr_base;
> +	q->data_base = data_base;
> +	q->window_base = window_base;
> +	q->window_size = window_size;
> +
> +	q->flags = flags;
> +
> +	dev_set_drvdata(dev, q);
> +
> +	dev_dbg(dev, "%s SR=0x%x FSR=0x%x\n", __func__,
> +		alt_qspi_readl(q->csr_base, QUADSPI_SR_REG),
> +		alt_qspi_readl(q->csr_base, QUADSPI_FLAG_STATUS_REG));
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(altera_quadspi_create);
> +
> +int altera_qspi_add_bank(struct device *dev,
> +			 u32 bank, struct device_node *np)
> +{
> +	struct altera_quadspi *q = dev_get_drvdata(dev);
> +
> +	if (q->num_flashes >= ALTERA_QUADSPI_MAX_NUM_FLASH_CHIP)
> +		return -ENOMEM;
> +
> +	q->num_flashes++;
> +
> +	return altera_quadspi_setup_banks(dev, bank, np);
> +}
> +EXPORT_SYMBOL_GPL(altera_qspi_add_bank);
> +
> +int altera_quadspi_remove_banks(struct device *dev)
> +{
> +	struct altera_quadspi *q = dev_get_drvdata(dev);
> +	struct altera_quadspi_flash *flash;
> +	int i;
> +	int ret = 0;
> +
> +	/* clean up for all nor flash */
> +	for (i = 0; i < q->num_flashes; i++) {
> +		flash = q->flash[i];
> +		if (!flash)
> +			continue;
> +
> +		/* clean up mtd stuff */
> +		ret = mtd_device_unregister(&flash->nor.mtd);
> +		if (ret) {
> +			dev_err(dev, "error removing mtd\n");
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(altera_quadspi_remove_banks);
> +
> +MODULE_AUTHOR("Viet Nga Dao <vndao@...era.com>");
> +MODULE_AUTHOR("Yong Sern Lau <lau.yong.sern@...el.com>");
> +MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@...ux.intel.com>");
> +MODULE_DESCRIPTION("Altera QuadSPI Version 2 Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mtd/altera-quadspi.h b/include/linux/mtd/altera-quadspi.h
> new file mode 100644
> index 0000000..58f31ee
> --- /dev/null
> +++ b/include/linux/mtd/altera-quadspi.h
> @@ -0,0 +1,28 @@
> +/*
> + *
> + * Copyright 2017 Intel Corporation, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef __ALTERA_QUADSPI_H
> +#define __ALTERA_QUADSPI_H
> +
> +#include <linux/device.h>
> +
> +#define ALTERA_QUADSPI_FL_BITREV_READ BIT(0)
> +#define ALTERA_QUADSPI_FL_BITREV_WRITE BIT(1)
> +
> +#define ALTERA_QUADSPI_MAX_NUM_FLASH_CHIP 3
> +
> +int altera_quadspi_create(struct device *dev, void __iomem *csr_base,
> +			  void __iomem *data_base, void __iomem *window_reg,
> +			  size_t window_size, u32 flags);
> +
> +int altera_qspi_add_bank(struct device *dev,
> +			 u32 bank, struct device_node *np);
> +
> +int altera_quadspi_remove_banks(struct device *dev);

Why is this header needed at all ?

> +#endif
> 


-- 
Best regards,
Marek Vasut

Powered by blists - more mailing lists