| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170627145948.15908.24705.stgit@tlendack-t1.amdoffice.net>
Date: Tue, 27 Jun 2017 09:59:48 -0500
From: Tom Lendacky <thomas.lendacky@....com>
To: linux-arch@...r.kernel.org, linux-efi@...r.kernel.org,
kvm@...r.kernel.org, linux-doc@...r.kernel.org, x86@...nel.org,
kexec@...ts.infradead.org, linux-kernel@...r.kernel.org,
kasan-dev@...glegroups.com, xen-devel@...ts.xen.org,
linux-mm@...ck.org, iommu@...ts.linux-foundation.org
Cc: Brijesh Singh <brijesh.singh@....com>,
Toshimitsu Kani <toshi.kani@....com>,
Radim Krčmář <rkrcmar@...hat.com>,
Matt Fleming <matt@...eblueprint.co.uk>,
Alexander Potapenko <glider@...gle.com>,
"H. Peter Anvin" <hpa@...or.com>,
Larry Woodman <lwoodman@...hat.com>,
Jonathan Corbet <corbet@....net>,
Joerg Roedel <joro@...tes.org>,
"Michael S. Tsirkin" <mst@...hat.com>,
Ingo Molnar <mingo@...hat.com>,
Andrey Ryabinin <aryabinin@...tuozzo.com>,
Dave Young <dyoung@...hat.com>, Rik van Riel <riel@...hat.com>,
Arnd Bergmann <arnd@...db.de>,
Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
Borislav Petkov <bp@...en8.de>,
Andy Lutomirski <luto@...nel.org>,
Boris Ostrovsky <boris.ostrovsky@...cle.com>,
Dmitry Vyukov <dvyukov@...gle.com>,
Juergen Gross <jgross@...e.com>,
Thomas Gleixner <tglx@...utronix.de>,
Paolo Bonzini <pbonzini@...hat.com>
Subject: [PATCH v8 20/38] x86,
mpparse: Use memremap to map the mpf and mpc data
The SMP MP-table is built by UEFI and placed in memory in a decrypted
state. These tables are accessed using a mix of early_memremap(),
early_memunmap(), phys_to_virt() and virt_to_phys(). Change all accesses
to use early_memremap()/early_memunmap(). This allows for proper setting
of the encryption mask so that the data can be successfully accessed when
SME is active.
Reviewed-by: Borislav Petkov <bp@...e.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
---
arch/x86/kernel/mpparse.c | 98 ++++++++++++++++++++++++++++++++-------------
1 file changed, 70 insertions(+), 28 deletions(-)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index fd37f39..5cbb317 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -429,7 +429,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
}
}
-static struct mpf_intel *mpf_found;
+static unsigned long mpf_base;
static unsigned long __init get_mpc_size(unsigned long physptr)
{
@@ -451,6 +451,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
size = get_mpc_size(mpf->physptr);
mpc = early_memremap(mpf->physptr, size);
+
/*
* Read the physical hardware table. Anything here will
* override the defaults.
@@ -497,12 +498,12 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
*/
void __init default_get_smp_config(unsigned int early)
{
- struct mpf_intel *mpf = mpf_found;
+ struct mpf_intel *mpf;
if (!smp_found_config)
return;
- if (!mpf)
+ if (!mpf_base)
return;
if (acpi_lapic && early)
@@ -515,6 +516,12 @@ void __init default_get_smp_config(unsigned int early)
if (acpi_lapic && acpi_ioapic)
return;
+ mpf = early_memremap(mpf_base, sizeof(*mpf));
+ if (!mpf) {
+ pr_err("MPTABLE: error mapping MP table\n");
+ return;
+ }
+
pr_info("Intel MultiProcessor Specification v1.%d\n",
mpf->specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
@@ -529,7 +536,7 @@ void __init default_get_smp_config(unsigned int early)
/*
* Now see if we need to read further.
*/
- if (mpf->feature1 != 0) {
+ if (mpf->feature1) {
if (early) {
/*
* local APIC has default address
@@ -542,8 +549,10 @@ void __init default_get_smp_config(unsigned int early)
construct_default_ISA_mptable(mpf->feature1);
} else if (mpf->physptr) {
- if (check_physptr(mpf, early))
+ if (check_physptr(mpf, early)) {
+ early_memunmap(mpf, sizeof(*mpf));
return;
+ }
} else
BUG();
@@ -552,6 +561,8 @@ void __init default_get_smp_config(unsigned int early)
/*
* Only use the first configuration found.
*/
+
+ early_memunmap(mpf, sizeof(*mpf));
}
static void __init smp_reserve_memory(struct mpf_intel *mpf)
@@ -561,15 +572,16 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)
static int __init smp_scan_config(unsigned long base, unsigned long length)
{
- unsigned int *bp = phys_to_virt(base);
+ unsigned int *bp;
struct mpf_intel *mpf;
- unsigned long mem;
+ int ret = 0;
apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
base, base + length - 1);
BUILD_BUG_ON(sizeof(*mpf) != 16);
while (length > 0) {
+ bp = early_memremap(base, length);
mpf = (struct mpf_intel *)bp;
if ((*bp == SMP_MAGIC_IDENT) &&
(mpf->length == 1) &&
@@ -579,24 +591,26 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
#endif
- mpf_found = mpf;
+ mpf_base = base;
- pr_info("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n",
- (unsigned long long) virt_to_phys(mpf),
- (unsigned long long) virt_to_phys(mpf) +
- sizeof(*mpf) - 1, mpf);
+ pr_info("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n",
+ base, base + sizeof(*mpf) - 1, mpf);
- mem = virt_to_phys(mpf);
- memblock_reserve(mem, sizeof(*mpf));
+ memblock_reserve(base, sizeof(*mpf));
if (mpf->physptr)
smp_reserve_memory(mpf);
- return 1;
+ ret = 1;
}
- bp += 4;
+ early_memunmap(bp, length);
+
+ if (ret)
+ break;
+
+ base += 16;
length -= 16;
}
- return 0;
+ return ret;
}
void __init default_find_smp_config(void)
@@ -838,29 +852,40 @@ static int __init update_mp_table(void)
char oem[10];
struct mpf_intel *mpf;
struct mpc_table *mpc, *mpc_new;
+ unsigned long size;
if (!enable_update_mptable)
return 0;
- mpf = mpf_found;
- if (!mpf)
+ if (!mpf_base)
+ return 0;
+
+ mpf = early_memremap(mpf_base, sizeof(*mpf));
+ if (!mpf) {
+ pr_err("MPTABLE: mpf early_memremap() failed\n");
return 0;
+ }
/*
* Now see if we need to go further.
*/
- if (mpf->feature1 != 0)
- return 0;
+ if (mpf->feature1)
+ goto do_unmap_mpf;
if (!mpf->physptr)
- return 0;
+ goto do_unmap_mpf;
- mpc = phys_to_virt(mpf->physptr);
+ size = get_mpc_size(mpf->physptr);
+ mpc = early_memremap(mpf->physptr, size);
+ if (!mpc) {
+ pr_err("MPTABLE: mpc early_memremap() failed\n");
+ goto do_unmap_mpf;
+ }
if (!smp_check_mpc(mpc, oem, str))
- return 0;
+ goto do_unmap_mpc;
- pr_info("mpf: %llx\n", (u64)virt_to_phys(mpf));
+ pr_info("mpf: %llx\n", (u64)mpf_base);
pr_info("physptr: %x\n", mpf->physptr);
if (mpc_new_phys && mpc->length > mpc_new_length) {
@@ -878,21 +903,32 @@ static int __init update_mp_table(void)
new = mpf_checksum((unsigned char *)mpc, mpc->length);
if (old == new) {
pr_info("mpc is readonly, please try alloc_mptable instead\n");
- return 0;
+ goto do_unmap_mpc;
}
pr_info("use in-position replacing\n");
} else {
+ mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
+ if (!mpc_new) {
+ pr_err("MPTABLE: new mpc early_memremap() failed\n");
+ goto do_unmap_mpc;
+ }
mpf->physptr = mpc_new_phys;
- mpc_new = phys_to_virt(mpc_new_phys);
memcpy(mpc_new, mpc, mpc->length);
+ early_memunmap(mpc, size);
mpc = mpc_new;
+ size = mpc_new_length;
/* check if we can modify that */
if (mpc_new_phys - mpf->physptr) {
struct mpf_intel *mpf_new;
/* steal 16 bytes from [0, 1k) */
+ mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
+ if (!mpf_new) {
+ pr_err("MPTABLE: new mpf early_memremap() failed\n");
+ goto do_unmap_mpc;
+ }
pr_info("mpf new: %x\n", 0x400 - 16);
- mpf_new = phys_to_virt(0x400 - 16);
memcpy(mpf_new, mpf, 16);
+ early_memunmap(mpf, sizeof(*mpf));
mpf = mpf_new;
mpf->physptr = mpc_new_phys;
}
@@ -909,6 +945,12 @@ static int __init update_mp_table(void)
*/
replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
+do_unmap_mpc:
+ early_memunmap(mpc, size);
+
+do_unmap_mpf:
+ early_memunmap(mpf, sizeof(*mpf));
+
return 0;
}
Powered by blists - more mailing lists