[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170628111632.22582-2-enric.balletbo@collabora.com>
Date: Wed, 28 Jun 2017 13:16:32 +0200
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: Thierry Reding <thierry.reding@...il.com>,
Lee Jones <lee.jones@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Rob Herring <robh+dt@...nel.org>, Pavel Machek <pavel@....cz>,
Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <jacek.anaszewski@...il.com>
Cc: linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
linux-kernel@...r.kernel.org, groeck@...omium.org,
huang lin <hl@...k-chips.com>
Subject: [PATCH 2/2] pwm-backlight: Add support for pwm-delay-us property
From: huang lin <hl@...k-chips.com>
Some panel backlight (i.e. N116BGE-L41), in their power sequence
specifications, request a delay between PWM signal and the backlight
enable signal, so use the pwm-delay-us property to meet the timing.
Signed-off-by: huang lin <hl@...k-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
---
drivers/video/backlight/pwm_bl.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 002f1ce..c5c4ef0 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/module.h>
@@ -30,6 +31,7 @@ struct pwm_bl_data {
unsigned int period;
unsigned int lth_brightness;
unsigned int *levels;
+ unsigned int pwm_delay;
bool enabled;
struct regulator *power_supply;
struct gpio_desc *enable_gpio;
@@ -54,10 +56,14 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
if (err < 0)
dev_err(pb->dev, "failed to enable power supply\n");
+ pwm_enable(pb->pwm);
+
+ if (pb->pwm_delay)
+ usleep_range(pb->pwm_delay, pb->pwm_delay + 2000);
+
if (pb->enable_gpio)
gpiod_set_value_cansleep(pb->enable_gpio, 1);
- pwm_enable(pb->pwm);
pb->enabled = true;
}
@@ -66,12 +72,15 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
if (!pb->enabled)
return;
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
-
if (pb->enable_gpio)
gpiod_set_value_cansleep(pb->enable_gpio, 0);
+ if (pb->pwm_delay)
+ usleep_range(pb->pwm_delay, pb->pwm_delay + 2000);
+
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+
regulator_disable(pb->power_supply);
pb->enabled = false;
}
@@ -273,6 +282,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->dev = &pdev->dev;
pb->enabled = false;
+ of_property_read_u32(pdev->dev.of_node, "pwm-delay-us", &pb->pwm_delay);
pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
GPIOD_ASIS);
if (IS_ERR(pb->enable_gpio)) {
--
2.9.3
Powered by blists - more mailing lists