linux-kernel - [PATCH v5 0/6] g_NCR5380: PDMA fixes and cleanup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1498713600.git.fthain@telegraphics.com.au>
Date:   Thu, 29 Jun 2017 01:24:18 -0400 (EDT)
From:   Finn Thain <fthain@...egraphics.com.au>
To:     "James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Ondrej Zary <linux@...nbow-software.org>
Cc:     <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Michael Schmitz <schmitzmic@...il.com>
Subject: [PATCH v5 0/6] g_NCR5380: PDMA fixes and cleanup

Ondrej, would you please test this new series?

Changed since v1:
- PDMA transfer residual is calculated earlier.
- End of DMA flag check is now polled (if there is any residual).

Changed since v2:
- Bail out of transfer loops when Gated IRQ gets asserted.
- Make udelay conditional on board type.
- Drop sg_tablesize patch due to performance regression.

Changed since v3:
- Add Ondrej's workaround for corrupt WRITE commands on DTC boards.
- Reset the 53c400 logic after any short PDMA transfer.
- Don't fail the transfer if the 53c400 logic got a reset.

Changed since v4:
- Bail out of transfer loops when Gated IRQ gets asserted. (Again.)
- Always call wait_for_53c80_registers() at end of transfer.
- Drain chip buffers after PDMA receive is interrupted.
- Rework residual calculation.
- Add new patch to correct DMA terminology.


Finn Thain (2):
  g_NCR5380: Cleanup comments and whitespace
  g_NCR5380: Use unambiguous terminology for PDMA send and receive

Ondrej Zary (4):
  g_NCR5380: Fix PDMA transfer size
  g_NCR5380: End PDMA transfer correctly on target disconnection
  g_NCR5380: Limit PDMA send to 512 B to avoid data corruption on
    DTC3181E
  g_NCR5380: Re-work PDMA loops

 drivers/scsi/g_NCR5380.c | 260 +++++++++++++++++++++++++----------------------
 1 file changed, 139 insertions(+), 121 deletions(-)

-- 
2.13.0