| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1498720566-20782-6-git-send-email-absahu@codeaurora.org>
Date: Thu, 29 Jun 2017 12:45:57 +0530
From: Abhishek Sahu <absahu@...eaurora.org>
To: dwmw2@...radead.org, computersforpeace@...il.com,
boris.brezillon@...e-electrons.com, marek.vasut@...il.com,
richard@....at, cyrille.pitchen@...ev4u.fr, robh+dt@...nel.org,
mark.rutland@....com
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
andy.gross@...aro.org, architt@...eaurora.org,
sricharan@...eaurora.org, Abhishek Sahu <absahu@...eaurora.org>
Subject: [PATCH 05/14] qcom: mtd: nand: allocate bam transaction
The BAM transaction is the core data structure which will be used
for all the data transfers in QPIC NAND. Since the base layer is
serializing all the NAND requests so allocating BAM transaction
before every transfer will be overhead. The memory for it be
allocated during probe time and before every transfer, it will be
cleared. The BAM transaction contains the array of command
elements, command and data scatter gather list and indexes. For
every transfer, all the resource will be taken from bam
transaction.
Signed-off-by: Abhishek Sahu <absahu@...eaurora.org>
---
drivers/mtd/nand/qcom_nandc.c | 116 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index eb0ec19..f8d0bde 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/delay.h>
+#include <linux/dma/qcom_bam_dma.h>
/* NANDc reg offsets */
#define NAND_FLASH_CMD 0x00
@@ -169,6 +170,45 @@
#define ECC_BCH_4BIT BIT(2)
#define ECC_BCH_8BIT BIT(3)
+#define QPIC_PER_CW_MAX_CMD_ELEMENTS (32)
+#define QPIC_PER_CW_MAX_CMD_SGL (32)
+#define QPIC_PER_CW_MAX_DATA_SGL (8)
+
+/*
+ * This data type corresponds to the BAM transaction which will be used for all
+ * NAND transfers.
+ * @bam_ce - the array of bam command elements
+ * @cmd_sgl - sgl for nand bam command pipe
+ * @data_sgl - sgl for nand bam consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl request
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ * for current sgl. It will be used for size calculation
+ * for current sgl
+ * @cmd_sgl_pos - current index in command sgl.
+ * @tx_sgl_pos - current index in data sgl for tx.
+ * @rx_sgl_pos - current index in data sgl for rx.
+ */
+struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
+ struct scatterlist *cmd_sgl;
+ struct scatterlist *data_sg;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
+ u32 cmd_sgl_pos;
+ u32 cmd_sgl_start;
+ u32 tx_sgl_pos;
+ u32 tx_sgl_start;
+ u32 rx_sgl_pos;
+ u32 rx_sgl_start;
+};
+
+/*
+ * This data type corresponds to the nand dma descriptor
+ * @list - list for desc_info
+ * @dir - DMA transfer direction
+ * @sgl - sgl which will be used for single sgl dma descriptor
+ * @dma_desc - low level dma engine descriptor
+ */
struct desc_info {
struct list_head node;
@@ -217,6 +257,7 @@ struct nandc_regs {
* @aon_clk: another controller clock
*
* @chan: dma channel
+ * @bam_txn: contains the bam transaction buffer
* @cmd_crci: ADM DMA CRCI for command flow control
* @data_crci: ADM DMA CRCI for data flow control
* @desc_list: DMA descriptor list (list of desc_infos)
@@ -237,6 +278,8 @@ struct nandc_regs {
* initialized via DT match data
* @dma_bam_enabled: flag to tell whether nand controller is using
* bam dma
+ * @max_cwperpage: maximum qpic codeword required. calcualted
+ * from all nand device pagesize
*/
struct qcom_nand_controller {
struct nand_hw_control controller;
@@ -264,12 +307,14 @@ struct qcom_nand_controller {
};
struct list_head desc_list;
+ struct bam_transaction *bam_txn;
u8 *data_buffer;
bool dma_bam_enabled;
int buf_size;
int buf_count;
int buf_start;
+ unsigned int max_cwperpage;
__le32 *reg_read_buf;
dma_addr_t reg_read_buf_phys;
@@ -342,6 +387,51 @@ struct qcom_nand_driver_data {
bool dma_bam_enabled;
};
+/* Frees the BAM transaction memory */
+static void free_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ devm_kfree(nandc->dev, bam_txn->bam_ce);
+ devm_kfree(nandc->dev, bam_txn->cmd_sgl);
+ devm_kfree(nandc->dev, bam_txn->data_sg);
+ devm_kfree(nandc->dev, bam_txn);
+}
+
+/* Allocates and Initializes the BAM transaction */
+static struct bam_transaction *
+alloc_bam_transaction(struct qcom_nand_controller *nandc, unsigned int num_cw)
+{
+ struct bam_transaction *bam_txn;
+
+ bam_txn = devm_kzalloc(nandc->dev, sizeof(*bam_txn), GFP_KERNEL);
+
+ if (!bam_txn)
+ return NULL;
+
+ bam_txn->bam_ce =
+ devm_kzalloc(nandc->dev, sizeof(*bam_txn->bam_ce) *
+ num_cw * QPIC_PER_CW_MAX_CMD_ELEMENTS, GFP_KERNEL);
+ if (!bam_txn->bam_ce)
+ return NULL;
+
+ bam_txn->cmd_sgl =
+ devm_kzalloc(nandc->dev, sizeof(*bam_txn->cmd_sgl) * num_cw *
+ QPIC_PER_CW_MAX_CMD_SGL, GFP_KERNEL);
+ if (!bam_txn->cmd_sgl)
+ return NULL;
+
+ bam_txn->data_sg =
+ devm_kzalloc(nandc->dev, sizeof(*bam_txn->data_sg) *
+ num_cw * QPIC_PER_CW_MAX_DATA_SGL, GFP_KERNEL);
+ if (!bam_txn->data_sg)
+ return NULL;
+
+ nandc->max_cwperpage = num_cw;
+
+ return bam_txn;
+}
+
static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
{
return container_of(chip, struct qcom_nand_host, chip);
@@ -1868,6 +1958,8 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
cwperpage = mtd->writesize / ecc->size;
+ nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
+ cwperpage);
/*
* DATA_UD_BYTES varies based on whether the read/write command protects
@@ -2010,6 +2102,19 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
dev_err(nandc->dev, "failed to request cmd channel\n");
return -ENODEV;
}
+
+ /*
+ * Initially allocate BAM transaction to read ONFI param page.
+ * After detecting all the devices, this BAM transaction will
+ * be freed and the next BAM tranasction will be allocated with
+ * maximum codeword size
+ */
+ nandc->bam_txn = alloc_bam_transaction(nandc, 1);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
}
INIT_LIST_HEAD(&nandc->desc_list);
@@ -2153,6 +2258,17 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
if (list_empty(&nandc->host_list))
return -ENODEV;
+ if (nandc->dma_bam_enabled) {
+ free_bam_transaction(nandc);
+ nandc->bam_txn = alloc_bam_transaction(nandc,
+ nandc->max_cwperpage);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
+ }
+
list_for_each_entry_safe(host, tmp, &nandc->host_list, node) {
ret = qcom_nand_mtd_register(nandc, host, child);
if (ret) {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists