| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 29 Jun 2017 06:37:56 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Frans Klaver <fransklaver@...il.com>,
Mike Looijmans <mike.looijmans@...ic.nl>
Cc: linux-hwmon@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
jdelvare@...e.com
Subject: Re: [PATCH] hwmon: Add LTC2471/LTC2473 driver
On 06/29/2017 04:18 AM, Frans Klaver wrote:
> On Thu, Jun 29, 2017 at 12:45 PM, Mike Looijmans
> <mike.looijmans@...ic.nl> wrote:
>> The LTC2741 and LTC2473 are single voltage monitoring chips. The LTC2473
>> is similar to the LTC2471 but outputs a signed differential value.
>>
>> Datasheet:
>> http://cds.linear.com/docs/en/datasheet/24713fb.pdf
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
>> ---
>> drivers/hwmon/Kconfig | 10 ++++
>> drivers/hwmon/Makefile | 1 +
>> drivers/hwmon/ltc2471.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 138 insertions(+)
>> create mode 100644 drivers/hwmon/ltc2471.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index fbde226..c9a2a87 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -673,6 +673,16 @@ config SENSORS_LINEAGE
>> This driver can also be built as a module. If so, the module
>> will be called lineage-pem.
>>
>> +config SENSORS_LTC2471
>> + tristate "Linear Technology LTC2471 and LTC2473"
>> + depends on I2C
>> + help
>> + If you say yes here you get support for Linear Technology LTC2471
>> + and LTC2473 voltage monitors.
>> +
>> + This driver can also be built as a module. If so, the module will
>> + be called ltc2471.
>> +
>> config SENSORS_LTC2945
>> tristate "Linear Technology LTC2945"
>> depends on I2C
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index 58cc3ac..6f60fe7 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -99,6 +99,7 @@ obj-$(CONFIG_SENSORS_LM93) += lm93.o
>> obj-$(CONFIG_SENSORS_LM95234) += lm95234.o
>> obj-$(CONFIG_SENSORS_LM95241) += lm95241.o
>> obj-$(CONFIG_SENSORS_LM95245) += lm95245.o
>> +obj-$(CONFIG_SENSORS_LTC2471) += ltc2471.o
>> obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o
>> obj-$(CONFIG_SENSORS_LTC2990) += ltc2990.o
>> obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o
>> diff --git a/drivers/hwmon/ltc2471.c b/drivers/hwmon/ltc2471.c
>> new file mode 100644
>> index 0000000..17eaad8
>> --- /dev/null
>> +++ b/drivers/hwmon/ltc2471.c
>> @@ -0,0 +1,127 @@
>> +/*
>> + * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors
>> + * The LTC2473 is identical to the 2471, but reports a differential signal.
>> + *
>> + * Copyright (C) 2017 Topic Embedded Products
>> + * Author: Mike Looijmans <mike.looijmans@...ic.nl>
>> + *
>> + * License: GPLv2
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>> +#include <linux/i2c.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +enum chips {
>> + ltc2471,
>> + ltc2473
>> +};
>> +
>> +struct ltc2471_data {
>> + struct i2c_client *i2c;
>> + bool differential;
>> +};
>
> I haven't checked if there are similar drivers, but how about
> ltc247x_data? It's a bit odd to tie all naming in this driver to one
> chip and then support another one as well.
>
No, we don't do that, since it implies ltc247[0-9] which could be completely different chips.
Guenter
>> +
>> +/* Reference voltage is 1.25V */
>> +#define LTC2471_VREF 1250
>> +
>> +/* Read two bytes from the I2C bus to obtain the ADC result */
>> +static int ltc2471_get_value(struct i2c_client *i2c)
>> +{
>> + int ret;
>> + __be16 buf;
>> +
>> + ret = i2c_master_recv(i2c, (char *)&buf, 2);
>> + if (ret < 0)
>> + return ret;
>> + if (ret != 2)
>> + return -EIO;
>> +
>> + /* MSB first */
>> + return be16_to_cpu(buf);
>> +}
>> +
>> +static ssize_t ltc2471_show_value(struct device *dev,
>> + struct device_attribute *da, char *buf)
>> +{
>> + struct ltc2471_data *data = dev_get_drvdata(dev);
>> + int value;
>> +
>> + value = ltc2471_get_value(data->i2c);
>> + if (unlikely(value < 0))
>> + return value;
>> +
>> + if (data->differential)
>> + /* Ranges from -VREF to +VREF with "0" at 0x8000 */
>> + value = ((s32)LTC2471_VREF * (s32)(value - 0x8000)) >> 15;
>> + else
>> + /* Ranges from 0 to +VREF */
>> + value = ((u32)LTC2471_VREF * (u32)value) >> 16;
>> +
>> + return snprintf(buf, PAGE_SIZE, "%d\n", value);
>> +}
>> +
>> +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2471_show_value, NULL, 0);
>
> Octal permissions are preferred over S_IRUGO and such.
>
>> +
>> +static struct attribute *ltc2471_attrs[] = {
>> + &sensor_dev_attr_in0_input.dev_attr.attr,
>> + NULL
>> +};
>> +
>> +ATTRIBUTE_GROUPS(ltc2471);
>> +
>> +static int ltc2471_i2c_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
>> +{
>> + int ret;
>> + struct device *hwmon_dev;
>> + struct ltc2471_data *data;
>> +
>> + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C))
>> + return -ENODEV;
>> +
>> + data = devm_kzalloc(&i2c->dev, sizeof(struct ltc2471_data), GFP_KERNEL);
>
> sizeof(*data)
>
>> + if (unlikely(!data))
>> + return -ENOMEM;
>> +
>> + data->i2c = i2c;
>> + data->differential = (id->driver_data == ltc2473);
>> +
>> + /* Trigger once to start conversion and check if chip is there */
>> + ret = ltc2471_get_value(i2c);
>> + if (ret < 0) {
>> + dev_err(&i2c->dev, "Cannot read from device.\n");
>> + return ret;
>> + }
>> +
>> + hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev,
>> + i2c->name,
>> + data,
>> + ltc2471_groups);
>> +
>> + return PTR_ERR_OR_ZERO(hwmon_dev);
>> +}
>> +
>> +static const struct i2c_device_id ltc2471_i2c_id[] = {
>> + { "ltc2471", ltc2471 },
>> + { "ltc2473", ltc2473 },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);
>> +
>> +static struct i2c_driver ltc2471_i2c_driver = {
>> + .driver = {
>> + .name = "ltc2471",
>> + },
>> + .probe = ltc2471_i2c_probe,
>> + .id_table = ltc2471_i2c_id,
>> +};
>> +
>> +module_i2c_driver(ltc2471_i2c_driver);
>> +
>> +MODULE_DESCRIPTION("LTC2471/LTC2473 Sensor Driver");
>> +MODULE_AUTHOR("Topic Embedded Products");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 1.9.1
>>
>
> Frans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Powered by blists - more mailing lists