| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <000101d2f103$2c8d0140$85a703c0$@dell.com>
Date: Thu, 29 Jun 2017 14:11:47 -0400
From: "Allen Hubbe" <Allen.Hubbe@...l.com>
To: "'Logan Gunthorpe'" <logang@...tatee.com>,
<linux-ntb@...glegroups.com>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Cc: "'Jon Mason'" <jdmason@...zu.us>,
"'Dave Jiang'" <dave.jiang@...el.com>,
"'Bjorn Helgaas'" <bhelgaas@...gle.com>,
"'Greg Kroah-Hartman'" <gregkh@...uxfoundation.org>,
"'Kurt Schwemmer'" <kurt.schwemmer@...rosemi.com>,
"'Stephen Bates'" <sbates@...thlin.com>,
"'Serge Semin'" <fancer.lancer@...il.com>
Subject: RE: [PATCH 05/16] ntb: ensure ntb_mw_get_align is only called when the link is up
From: Logan Gunthorpe
> With switchtec hardware it's impossible to get the alignment parameters
> for a peer's memory window until the peer's driver has configured it's
> windows. Strictly speaking, the link doesn't have to be up for this,
> but the link being up is the only way the client can tell that
> the otherside has been configured.
>
> This patch converts ntb_transport and ntb_perf to use this function after
> the link goes up. This simplifies these clients slightly because they
> no longer have to store the alignment parameters. It also tweaks
> ntb_tool so that peer_mw_trans will print zero if it is run before
> the link goes up.
>
> Signed-off-by: Logan Gunthorpe <logang@...tatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@...l.com>
> ---
> drivers/ntb/ntb_transport.c | 20 ++++++++++----------
> drivers/ntb/test/ntb_perf.c | 18 +++++++++---------
> drivers/ntb/test/ntb_tool.c | 6 +++---
> 3 files changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
> index b29558ddfe95..7ed745aaa213 100644
> --- a/drivers/ntb/ntb_transport.c
> +++ b/drivers/ntb/ntb_transport.c
> @@ -191,8 +191,6 @@ struct ntb_transport_qp {
> struct ntb_transport_mw {
> phys_addr_t phys_addr;
> resource_size_t phys_size;
> - resource_size_t xlat_align;
> - resource_size_t xlat_align_size;
> void __iomem *vbase;
> size_t xlat_size;
> size_t buff_size;
> @@ -687,13 +685,20 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
> struct ntb_transport_mw *mw = &nt->mw_vec[num_mw];
> struct pci_dev *pdev = nt->ndev->pdev;
> size_t xlat_size, buff_size;
> + resource_size_t xlat_align;
> + resource_size_t xlat_align_size;
> int rc;
>
> if (!size)
> return -EINVAL;
>
> - xlat_size = round_up(size, mw->xlat_align_size);
> - buff_size = round_up(size, mw->xlat_align);
> + rc = ntb_mw_get_align(nt->ndev, PIDX, num_mw, &xlat_align,
> + &xlat_align_size, NULL);
> + if (rc)
> + return rc;
> +
> + xlat_size = round_up(size, xlat_align_size);
> + buff_size = round_up(size, xlat_align);
>
> /* No need to re-setup */
> if (mw->xlat_size == xlat_size)
> @@ -722,7 +727,7 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
> * is a requirement of the hardware. It is recommended to setup CMA
> * for BAR sizes equal or greater than 4MB.
> */
> - if (!IS_ALIGNED(mw->dma_addr, mw->xlat_align)) {
> + if (!IS_ALIGNED(mw->dma_addr, xlat_align)) {
> dev_err(&pdev->dev, "DMA memory %pad is not aligned\n",
> &mw->dma_addr);
> ntb_free_mw(nt, num_mw);
> @@ -1106,11 +1111,6 @@ static int ntb_transport_probe(struct ntb_client *self, struct ntb_dev *ndev)
> for (i = 0; i < mw_count; i++) {
> mw = &nt->mw_vec[i];
>
> - rc = ntb_mw_get_align(ndev, PIDX, i, &mw->xlat_align,
> - &mw->xlat_align_size, NULL);
> - if (rc)
> - goto err1;
> -
> rc = ntb_peer_mw_get_addr(ndev, i, &mw->phys_addr,
> &mw->phys_size);
> if (rc)
> diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
> index 759f772fa00c..427112cf101a 100644
> --- a/drivers/ntb/test/ntb_perf.c
> +++ b/drivers/ntb/test/ntb_perf.c
> @@ -108,8 +108,6 @@ MODULE_PARM_DESC(on_node, "Run threads only on NTB device node (default: true)")
> struct perf_mw {
> phys_addr_t phys_addr;
> resource_size_t phys_size;
> - resource_size_t xlat_align;
> - resource_size_t xlat_align_size;
> void __iomem *vbase;
> size_t xlat_size;
> size_t buf_size;
> @@ -472,13 +470,20 @@ static int perf_set_mw(struct perf_ctx *perf, resource_size_t size)
> {
> struct perf_mw *mw = &perf->mw;
> size_t xlat_size, buf_size;
> + resource_size_t xlat_align;
> + resource_size_t xlat_align_size;
> int rc;
>
> if (!size)
> return -EINVAL;
>
> - xlat_size = round_up(size, mw->xlat_align_size);
> - buf_size = round_up(size, mw->xlat_align);
> + rc = ntb_mw_get_align(perf->ntb, PIDX, 0, &xlat_align,
> + &xlat_align_size, NULL);
> + if (rc)
> + return rc;
> +
> + xlat_size = round_up(size, xlat_align_size);
> + buf_size = round_up(size, xlat_align);
>
> if (mw->xlat_size == xlat_size)
> return 0;
> @@ -567,11 +572,6 @@ static int perf_setup_mw(struct ntb_dev *ntb, struct perf_ctx *perf)
>
> mw = &perf->mw;
>
> - rc = ntb_mw_get_align(ntb, PIDX, 0, &mw->xlat_align,
> - &mw->xlat_align_size, NULL);
> - if (rc)
> - return rc;
> -
> rc = ntb_peer_mw_get_addr(ntb, 0, &mw->phys_addr, &mw->phys_size);
> if (rc)
> return rc;
> diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
> index a69815c45ce6..91526a986caa 100644
> --- a/drivers/ntb/test/ntb_tool.c
> +++ b/drivers/ntb/test/ntb_tool.c
> @@ -753,9 +753,9 @@ static ssize_t tool_peer_mw_trans_read(struct file *filep,
>
> phys_addr_t base;
> resource_size_t mw_size;
> - resource_size_t align_addr;
> - resource_size_t align_size;
> - resource_size_t max_size;
> + resource_size_t align_addr = 0;
> + resource_size_t align_size = 0;
> + resource_size_t max_size = 0;
>
> buf_size = min_t(size_t, size, 512);
>
> --
> 2.11.0
Powered by blists - more mailing lists