[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87b7542473a9566627759c34aa34db0054b97737.1498795030.git.douly.fnst@cn.fujitsu.com>
Date: Fri, 30 Jun 2017 12:07:40 +0800
From: Dou Liyang <douly.fnst@...fujitsu.com>
To: <x86@...nel.org>, <linux-kernel@...r.kernel.org>,
<xen-devel@...ts.xenproject.org>
CC: <tglx@...utronix.de>, <mingo@...nel.org>, <hpa@...or.com>,
<ebiederm@...ssion.com>, <bhe@...hat.com>,
<boris.ostrovsky@...cle.com>, <peterz@...radead.org>,
<izumi.taku@...fujitsu.com>, Dou Liyang <douly.fnst@...fujitsu.com>
Subject: [PATCH v5 12/12] x86/apic: Remove the init_bsp_APIC()
The init_bsp_APIC() which works for the virtual wire mode is used
in ISA irq initialization at the booting time.
Currently, enable and setup the interrupt mode has been unified
and advanced just behind the timer IRQ setup. Kernel switches to
the final interrupt delivery mode directly. So init_bsp_APIC()
is redundant.
Remove the init_bsp_APIC() function.
Signed-off-by: Dou Liyang <douly.fnst@...fujitsu.com>
---
arch/x86/include/asm/apic.h | 1 -
arch/x86/kernel/apic/apic.c | 49 ---------------------------------------------
arch/x86/kernel/irqinit.c | 3 ---
3 files changed, 53 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index b35bbbf..3c9fc9e 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -136,7 +136,6 @@ extern void disconnect_bsp_APIC(int virt_wire_setup);
extern void disable_local_APIC(void);
extern void lapic_shutdown(void);
extern void sync_Arb_IDs(void);
-extern void init_bsp_APIC(void);
extern void apic_intr_mode_init(void);
extern void setup_local_APIC(void);
extern void init_apic_mappings(void);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index d4722c2..47c94d5 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1235,55 +1235,6 @@ static int __init apic_intr_mode_select(int *upmode)
return APIC_SYMMETRIC_IO;
}
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
- unsigned int value;
-
- /*
- * Don't do the setup now if we have a SMP BIOS as the
- * through-I/O-APIC virtual wire mode might be active.
- */
- if (smp_found_config || !boot_cpu_has(X86_FEATURE_APIC))
- return;
-
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
-
- /*
- * Enable APIC.
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
- /* This bit is reserved on P4/Xeon and should be cleared */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- (boot_cpu_data.x86 == 15))
- value &= ~APIC_SPIV_FOCUS_DISABLED;
- else
-#endif
- value |= APIC_SPIV_FOCUS_DISABLED;
- value |= SPURIOUS_APIC_VECTOR;
- apic_write(APIC_SPIV, value);
-
- /*
- * Set up the virtual wire mode.
- */
- apic_write(APIC_LVT0, APIC_DM_EXTINT);
- value = APIC_DM_NMI;
- if (!lapic_is_integrated()) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
- if (apic_extnmi == APIC_EXTNMI_NONE)
- value |= APIC_LVT_MASKED;
- apic_write(APIC_LVT1, value);
-}
-
/* Init the interrupt delivery mode for the BSP */
void __init apic_intr_mode_init(void)
{
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 7468c69..488c9e2 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -72,9 +72,6 @@ void __init init_ISA_irqs(void)
struct irq_chip *chip = legacy_pic->chip;
int i;
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
- init_bsp_APIC();
-#endif
legacy_pic->init(0);
for (i = 0; i < nr_legacy_irqs(); i++)
--
2.5.5
Powered by blists - more mailing lists