[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAL_JsqJCvtCx-s3usVaPvz0bH8EZOGyykG2CTG6_mmNR7cHp_w@mail.gmail.com>
Date: Fri, 30 Jun 2017 09:44:27 -0500
From: Rob Herring <robh@...nel.org>
To: jeffy <jeffy.chen@...k-chips.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Brian Norris <briannorris@...omium.org>,
Doug Anderson <dianders@...omium.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Mark Brown <broonie@...nel.org>,
"linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [RFC PATCH v3 2/6] dt-bindings: spi/core: add wakeup-source
optional property
On Mon, Jun 26, 2017 at 9:04 PM, jeffy <jeffy.chen@...k-chips.com> wrote:
> Hi Rob,
>
> On 06/27/2017 12:40 AM, Dmitry Torokhov wrote:
>>
>> On Mon, Jun 26, 2017 at 11:00:11AM -0500, Rob Herring wrote:
>>>
>>> On Wed, Jun 21, 2017 at 06:01:49PM +0800, Jeffy Chen wrote:
>>>>
>>>> Update document devicetree bindings to support "wakeup-source" property.
>>>>
>>>> Signed-off-by: Jeffy Chen <jeffy.chen@...k-chips.com>
>>>> ---
>>>>
>>>> Changes in v3: None
>>>>
>>>> Documentation/devicetree/bindings/spi/spi-bus.txt | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt
>>>> b/Documentation/devicetree/bindings/spi/spi-bus.txt
>>>> index 1f6e86f..0fa1ccf 100644
>>>> --- a/Documentation/devicetree/bindings/spi/spi-bus.txt
>>>> +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
>>>> @@ -77,6 +77,7 @@ All slave nodes can contain the following optional
>>>> properties:
>>>> Defaults to 1 if not present.
>>>> - spi-rx-delay-us - Microsecond delay after a read transfer.
>>>> - spi-tx-delay-us - Microsecond delay after a write transfer.
>>>> +- wakeup-source - Device can be used as a wakeup source.
>>>
>>>
>>> wakeup-source is valid for any device with an interrupts property
>>> already, so I don't think this is necessary.
>
> i saw http://lkml.iu.edu/hypermail/linux/kernel/1510.2/04553.html add a
> Documentation/devicetree/bindings/power/wakeup-source.txt for this, but that
> serial didn't remove all wakeup-source property from other bindings, but
> standardize them, for example:
> 71a0151 Documentation: devicetree: fix reference to legacy wakeup properties
>
> +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
> @@ -24,6 +24,7 @@ Optional subnode-properties:
> - debounce-interval: Debouncing interval time in milliseconds.
> If not specified defaults to 5.
> - wakeup-source: Boolean, button can wake-up the system.
> + (Legacy property supported: "gpio-key,wakeup")
>
>>
>> Do you mean it is not necessary on SPI level or not necessary at all? Or
>> you disagree with wording? Because we do need a way to say that on given
>> platform the device is supposed to be configured as a wakeup source.
>>
>> Thanks.
>>
>
> Hi guys,
>
> Mark Brown suggested to put wakeup-source support in some common place
> instead of sub drivers, should we do that?
As you point out, it is already documented in a common place. In SPI
makes no sense. Are you going to document in I2C, simple-bus, USB,
etc. as well?
wakeup-source is really a property of the system (the upstream
interrupt controller in particular), so it doesn't really need to be
documented per device.
Rob
Powered by blists - more mailing lists