| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.20.1706301614130.29944@vps.pmeerw.net>
Date: Sun, 2 Jul 2017 10:29:35 +0200 (CEST)
From: Peter Meerwald-Stadler <pmeerw@...erw.net>
To: Mike Looijmans <mike.looijmans@...ic.nl>
cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
jic23@...nel.org, lars@...afoo.de, linux@...ck-us.net
Subject: Re: [PATCH] iio: Add LTC2471/LTC2473 driver
> The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473
> is similar to the LTC2471 but outputs a signed differential value.
comments below
> Datasheet:
> http://cds.linear.com/docs/en/datasheet/24713fb.pdf
>
> Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
> ---
> Note: Moved from "hwmon" subsystem to "iio" as discussed per e-mail,
> see also: https://patchwork.kernel.org/patch/9816607/
> Only tested the LTC2741 in real life.
>
> drivers/iio/adc/Kconfig | 10 +++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ltc2471.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 174 insertions(+)
> create mode 100644 drivers/iio/adc/ltc2471.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 401f47b..fbee44a 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -362,6 +362,16 @@ config LPC32XX_ADC
> activate only one via device tree selection. Provides direct access
> via sysfs.
>
> +config LTC2471
> + tristate "Linear Technology LTC2471 and LTC2473 ADC driver"
> + depends on I2C
> + help
> + Say yes here to build support for Linear Technology LTC2471 and
> + LTC2473 ADC.
> +
> + This driver can also be built as a module. If so, the module will
> + be called ltc2471.
> +
> config LTC2485
> tristate "Linear Technology LTC2485 ADC driver"
> depends on I2C
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 9339bec..afafe85 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
> obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
> +obj-$(CONFIG_LTC2471) += ltc2471.o
> obj-$(CONFIG_LTC2485) += ltc2485.o
> obj-$(CONFIG_LTC2497) += ltc2497.o
> obj-$(CONFIG_MAX1027) += max1027.o
> diff --git a/drivers/iio/adc/ltc2471.c b/drivers/iio/adc/ltc2471.c
> new file mode 100644
> index 0000000..f26bdad
> --- /dev/null
> +++ b/drivers/iio/adc/ltc2471.c
> @@ -0,0 +1,163 @@
> +/*
> + * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors
> + * The LTC2473 is identical to the 2471, but reports a differential signal.
> + *
> + * Copyright (C) 2017 Topic Embedded Products
> + * Author: Mike Looijmans <mike.looijmans@...ic.nl>
> + *
> + * License: GPLv2
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +enum chips {
ltc2471_ prefix please
> + ltc2471,
> + ltc2473
end last line with a comma, so additions can be done with a one-line patch
> +};
> +
> +struct ltc2471_data {
> + struct i2c_client *client;
> +};
> +
> +/* Reference voltage is 1.25V */
> +#define LTC2471_VREF 1250
> +
> +/* Read two bytes from the I2C bus to obtain the ADC result */
> +static int ltc2471_get_value(struct i2c_client *client)
> +{
> + int ret;
> + __be16 buf;
> +
> + ret = i2c_master_recv(client, (char *)&buf, 2);
sizeof(buf) probably
> + if (ret < 0)
> + return ret;
> + if (ret != 2)
sizeof(buf) probably
> + return -EIO;
> +
> + /* MSB first */
> + return be16_to_cpu(buf);
> +}
> +
> +static int ltc2471_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long info)
> +{
> + struct ltc2471_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + ret = ltc2471_get_value(data->client);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + if (chan->differential)
> + /* Output ranges from -VREF to +VREF */
> + *val = 2 * LTC2471_VREF;
> + else
> + /* Output ranges from 0 to VREF */
> + *val = LTC2471_VREF;
> + *val2 = 16; /* 16 data bits */
> + return IIO_VAL_FRACTIONAL_LOG2;
> +
> + case IIO_CHAN_INFO_OFFSET:
> + if (chan->differential)
> + *val = -LTC2471_VREF;
> + else
> + *val = 0;
the non-differential (single ended) chip has no offset channel anyway
according to iio_chan_spec...
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_chan_spec ltc2471_channel[] = {
> + {
> + .type = IIO_VOLTAGE,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .differential = 0,
.differential = 0 not needed
> + },
> +};
> +static const struct iio_chan_spec ltc2473_channel[] = {
> + {
> + .type = IIO_VOLTAGE,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_OFFSET),
> + .differential = 1,
> + },
> +};
> +
> +static const struct iio_info ltc2471_info = {
> + .read_raw = ltc2471_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int ltc2471_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct iio_dev *indio_dev;
> + struct ltc2471_data *data;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> + return -EOPNOTSUPP;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->name = id->name;
> + indio_dev->info = <c2471_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + if (id->driver_data == ltc2473)
> + indio_dev->channels = ltc2473_channel;
> + else
> + indio_dev->channels = ltc2471_channel;
> + indio_dev->num_channels = 1;
> +
> + /* Trigger once to start conversion and check if chip is there */
> + ret = ltc2471_get_value(client);
> + if (ret < 0) {
> + dev_err(&client->dev, "Cannot read from device.\n");
> + return ret;
> + }
> +
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static const struct i2c_device_id ltc2471_i2c_id[] = {
> + { "ltc2471", ltc2471 },
> + { "ltc2473", ltc2473 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);
> +
> +static struct i2c_driver ltc2471_i2c_driver = {
> + .driver = {
> + .name = "ltc2471",
> + },
> + .probe = ltc2471_i2c_probe,
> + .id_table = ltc2471_i2c_id,
> +};
> +
> +module_i2c_driver(ltc2471_i2c_driver);
> +
> +MODULE_DESCRIPTION("LTC2471/LTC2473 Sensor Driver");
maybe "ADC driver"
> +MODULE_AUTHOR("Topic Embedded Products");
> +MODULE_LICENSE("GPL v2");
>
--
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418
Powered by blists - more mailing lists