lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c705b9a0-5bfc-36d8-9dc3-79137430d347@st.com>
Date:   Mon, 3 Jul 2017 08:16:42 +0000
From:   Hugues FRUCHET <hugues.fruchet@...com>
To:     "H. Nikolaus Schaller" <hns@...delico.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Sakari Ailus <sakari.ailus@....fi>, Pavel Machek <pavel@....cz>
CC:     Discussions about the Letux Kernel <letux-kernel@...nphoenux.org>,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 0/6] Add support of OV9655 camera

Hi Nikolaus,
Could you enable V4L2 UAPI traces ? Something like:
echo 0xFF >  /sys/devices/platform/soc/<isp address>.<isp 
name>/video4linux/video2/dev_debug

you will see then in kernel dmesg the V4L2 calls and their 
parameters/return values.

BR,
Hugues.

On 07/01/2017 11:00 PM, H. Nikolaus Schaller wrote:
> Hi,
> 
> Firstly, it turned out that we also must have V4L2_CID_PIXEL_RATE for omap3isp compatibility
> (see https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?&id=0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 ).
> 
> And secondly, I have tried to add some SXGA config and it looks good by oscilloscope:
> - XCLK ca. 24 MHz
> - PCLK ca. 12 MHz
> - HREF ca. 15.6 kHz negative going impulses
> - VSYNC ca. 15 Hz (fps) positive going impulses
> - D8 data line shows changing 0/1 patterns which depend on light falling in camera lens
> 
> But mplayer still shows a green screen and reports v4l2: select timeout.
> 
> I assume we should see a at least scrambled image but not a green screen,
> even if sync position and polarity or data format would not be correctly
> set up.
> 
> This time the omap3isp is fully initialized and does a register dump:
> 
>> root@...ux:~# ./camera-demo sxga
>> Camera: /dev/v4l-subdev8
>> Setting mode sxga
>> media-ctl -r
>> media-ctl -l '"ov965x":0 -> "OMAP3 ISP CCDC":0[1]'
>> media-ctl -l '"OMAP3 ISP CCDC":1 -> "OMAP3 ISP CCDC output":0[1]'
>> media-ctl -V '"ov965x":0 [UYVY2X8 1280x1024]'
>> media-ctl -V '"OMAP3 ISP CCDC":0 [UYVY2X8 1280x1024]'
>> media-ctl -V '"OMAP3 ISP CCDC":1 [UYVY 1280x1024]'
>> ### starting mplayer in sxga mode ###
>> mplayer tv:// -vf rotate=2 -tv driver=v4l2:device=/dev/video2:outfmt=uyvy:width=1280:height=1024:fps=15 -vo x11
> 
> NOTE: /dev/video2 is $(media-ctl -e "OMAP3 ISP CCDC output")
> 
>> MPlayer2 2.0-728-g2c378c7-4+b1 (C) 2000-2012 MPlayer Team
>>
>> Playing tv://.
>> Detected file format: TV
>> Selected driver: v4l2
>>   name: Video 4 Linux 2 input
>>   author: Martin Olschewski <olschewski@....uni-koeln.de>
>>   comment: first try, more to come ;-)
>> v4l2: ioctl get standard failed: Invalid argument
> 
> ^^^ does not look harmful
> 
>> Selected device: OMAP3 ISP CCDC output
>>   Capabilities:  video capture  video output  streaming
>>   supported norms:
>>   inputs: 0 = camera;
>>   Current input: 0
>>   Current format: unknown (0x0)
>> tv.c: norm_from_string(pal): Bogus norm parameter, setting default.
>> v4l2: ioctl enum norm failed: Inappropriate ioctl for device
> 
> ^^^ does not look harmful
> 
>> Error: Cannot set norm!
>> Selected input hasn't got a tuner!
> 
> ^^^ does not look harmful
> 
>> v4l2: ioctl set mute failed: Inappropriate ioctl for device
>> v4l2: ioctl query control failed: Inappropriate ioctl for device
>> v4l2: ioctl query control failed: Inappropriate ioctl for device
>> v4l2: ioctl query control failed: Inappropriate ioctl for device
>> v4l2: ioctl query control failed: Inappropriate ioctl for device
> 
> ^^^ does not look harmful
> 
>> [  558.848815] configuring for 1280(2560)x1024
>> [  558.854003] omap3isp 480bc000.isp: -------------CCDC Register dump-------------
>> [  558.863983] omap3isp 480bc000.isp: ###CCDC PCR=0x00000000
>> [  558.870880] omap3isp 480bc000.isp: ###CCDC SYN_MODE=0x00071704
>> [  558.877227] omap3isp 480bc000.isp: ###CCDC HD_VD_WID=0x00000000
>> [  558.884613] omap3isp 480bc000.isp: ###CCDC PIX_LINES=0x00000000
>> [  558.891876] omap3isp 480bc000.isp: ###CCDC HORZ_INFO=0x000004ff
>> [  558.898132] omap3isp 480bc000.isp: ###CCDC VERT_START=0x00000000
>> [  558.905700] omap3isp 480bc000.isp: ###CCDC VERT_LINES=0x000003ff
>> [  558.913421] omap3isp 480bc000.isp: ###CCDC CULLING=0xffff00ff
>> [  558.920471] omap3isp 480bc000.isp: ###CCDC HSIZE_OFF=0x00000a00
>> [  558.926727] omap3isp 480bc000.isp: ###CCDC SDOFST=0x00000000
>> [  558.933929] omap3isp 480bc000.isp: ###CCDC SDR_ADDR=0x40000000
>> [  558.940948] omap3isp 480bc000.isp: ###CCDC CLAMP=0x00000010
>> [  558.946990] omap3isp 480bc000.isp: ###CCDC DCSUB=0x00000000
>> [  558.953948] omap3isp 480bc000.isp: ###CCDC COLPTN=0xbb11bb11
>> [  558.960845] omap3isp 480bc000.isp: ###CCDC BLKCMP=0x00000000
>> [  558.966888] omap3isp 480bc000.isp: ###CCDC FPC=0x00000000
>> [  558.973724] omap3isp 480bc000.isp: ###CCDC FPC_ADDR=0x00000000
>> [  558.982757] omap3isp 480bc000.isp: ###CCDC VDINT=0x03fe02aa
>> [  558.988769] omap3isp 480bc000.isp: ###CCDC ALAW=0x00000004
>> [  558.995483] omap3isp 480bc000.isp: ###CCDC REC656IF=0x00000000
>> [  559.002380] omap3isp 480bc000.isp: ###CCDC CFG=0x00008800
>> [  559.008056] omap3isp 480bc000.isp: ###CCDC FMTCFG=0x00000000
>> [  559.014892] omap3isp 480bc000.isp: ###CCDC FMT_HORZ=0x00000000
>> [  559.021697] omap3isp 480bc000.isp: ###CCDC FMT_VERT=0x00000000
>> [  559.027954] omap3isp 480bc000.isp: ###CCDC PRGEVEN0=0x00000000
>> [  559.034912] omap3isp 480bc000.isp: ###CCDC PRGEVEN1=0x00000000
>> [  559.041748] omap3isp 480bc000.isp: ###CCDC PRGODD0=0x00000000
>> [  559.047790] omap3isp 480bc000.isp: ###CCDC PRGODD1=0x00000000
>> [  559.054687] omap3isp 480bc000.isp: ###CCDC VP_OUT=0x00000000
>> [  559.061645] omap3isp 480bc000.isp: ###CCDC LSC_CONFIG=0x00006600
>> [  559.068084] omap3isp 480bc000.isp: ###CCDC LSC_INITIAL=0x00000000
>> [  559.075378] omap3isp 480bc000.isp: ###CCDC LSC_TABLE_BASE=0x00000000
>> [  559.082916] omap3isp 480bc000.isp: ###CCDC LSC_TABLE_OFFSET=0x00000000
>> [  559.090454] omap3isp 480bc000.isp: --------------------------------------------
>> [ass] auto-open
>> Opening video filter: [rotate=2]
>> VIDEO:  1280x1024  15.000 fps    0.0 kbps ( 0.0 kB/s)
>> Could not find matching colorspace - retrying with -vf scale...
>> Opening video filter: [scale]
>> [swscaler @ 0xb5d45980]using unscaled uyvy422 -> yuv420p special converter
>> VO: [x11] 1024x1280 => 1024x1280 Planar YV12
>> [swscaler @ 0xb5d45980]No accelerated colorspace conversion found from yuv420p to bgra.
>> Colorspace details not fully supported by selected vo.
>> Selected video codec: RAW UYVY [raw]
>> Audio: no sound
>> Starting playback...
>> v4l2: select timeout
>> V:   0.0   1/  1 ??% ??% ??,?% 0 0
>> v4l2: select timeout
>> V:   0.0   3/  3 ??% ??% ??,?% 0 0
>> v4l2: select timeout
>> V:   0.0   4/  4 ??% ??% ??,?% 0 0
>> v4l2: select timeout
>> V:   0.0   5/  5 ??% ??% ??,?% 0 0
>> v4l2: select timeout
>>
>>
>> MPlayer interrupted by signal 2 in module: filter_video
>> V:   0.0   6/  6 ??% ??% ??,?% 0 0
>> v4l2: select timeout
>> [  565.122406] omap3isp 480bc000.isp: OMAP3 ISP AEWB: user wants to disable module.
>> [  565.130950] omap3isp 480bc000.isp: OMAP3 ISP AEWB: module is being disabled
>> [  565.138397] omap3isp 480bc000.isp: OMAP3 ISP AF: user wants to disable module.
>> [  565.149047] omap3isp 480bc000.isp: OMAP3 ISP AF: module is being disabled
>> [  565.158660] omap3isp 480bc000.isp: OMAP3 ISP histogram: user wants to disable module.
>> [  565.168945] omap3isp 480bc000.isp: OMAP3 ISP histogram: module is being disabled
>> [  567.221099] omap3isp 480bc000.isp: CCDC stop timeout!
>> [  567.226593] omap3isp 480bc000.isp: Unable to stop OMAP3 ISP CCDC
> 
> ^^^ that looks like some lockup of the CCDC?
> 
>> v4l2: ioctl set mute failed: Inappropriate ioctl for device
>> v4l2: 0 frames successfully processed, 1 frames dropped.
>>
>> Exiting... (Quit)
>> root@...ux:~#
> 
> Latest patches are here:
> 
> 	http://git.goldelico.com/?p=gta04-kernel.git;a=shortlog;h=refs/heads/extern/ov9655-v2
> 
> Device tree:
> 
> 	http://git.goldelico.com/?p=gta04-kernel.git;a=blob;f=arch/arm/boot/dts/omap3-gta04.dtsi;hb=80a33790b381c83fd6e99af15cb5bd6c97abb0a7#l941
> 
> Any ideas how to debug 'v4l2: select timeout'?
> 
> BR and thanks,
> Nikolaus
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ