[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1499073368-31905-2-git-send-email-hugues.fruchet@st.com>
Date: Mon, 3 Jul 2017 11:16:02 +0200
From: Hugues Fruchet <hugues.fruchet@...com>
To: Sylwester Nawrocki <sylvester.nawrocki@...il.com>,
" H. Nikolaus Schaller" <hns@...delico.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil@...all.nl>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-media@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Yannick Fertre <yannick.fertre@...com>,
Hugues Fruchet <hugues.fruchet@...com>
Subject: [PATCH v2 1/7] DT bindings: add bindings for ov965x camera module
From: "H. Nikolaus Schaller" <hns@...delico.com>
This adds documentation of device tree bindings
for the OV965X family camera sensor module.
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@...com>
---
.../devicetree/bindings/media/i2c/ov965x.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
new file mode 100644
index 0000000..4ceb727
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
@@ -0,0 +1,45 @@
+* Omnivision OV9650/9652/9655 CMOS sensor
+
+The Omnivision OV965x sensor support multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
+output format.
+
+Required Properties:
+- compatible: should be one of
+ "ovti,ov9650"
+ "ovti,ov9652"
+ "ovti,ov9655"
+- clocks: reference to the mclk input clock.
+
+Optional Properties:
+- resetb-gpios: reference to the GPIO connected to the RESETB pin, if any,
+ polarity is active low.
+- pwdn-gpios: reference to the GPIO connected to the PWDN pin, if any,
+ polarity is active high.
+- avdd-supply: reference to the analog power supply regulator connected
+ to the AVDD pin, if any.
+- dvdd-supply: reference to the digital power supply regulator connected
+ to the DVDD pin, if any.
+- dovdd-supply: reference to the digital I/O power supply regulator
+ connected to the DOVDD pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+&i2c2 {
+ ov9655: camera@30 {
+ compatible = "ovti,ov9655";
+ reg = <0x30>;
+ pwdn-gpios = <&gpioh 13 GPIO_ACTIVE_HIGH>;
+ clocks = <&clk_ext_camera>;
+
+ port {
+ ov9655: endpoint {
+ remote-endpoint = <&dcmi_0>;
+ };
+ };
+ };
+};
--
1.9.1
Powered by blists - more mailing lists