linux-kernel - [PATCH 4.4 030/101] block: fix module reference leak on put

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170703133339.577841921@linuxfoundation.org>
Date:   Mon,  3 Jul 2017 15:34:30 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Roman Pen <roman.penyaev@...fitbricks.com>,
        Gi-Oh Kim <gi-oh.kim@...fitbricks.com>,
        Tejun Heo <tj@...nel.org>, Jens Axboe <axboe@...nel.dk>,
        linux-block@...r.kernel.org, Jens Axboe <axboe@...com>,
        Sumit Semwal <sumit.semwal@...aro.org>
Subject: [PATCH 4.4 030/101] block: fix module reference leak on put_disk() call for cgroups throttle

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roman Pen <roman.penyaev@...fitbricks.com>

commit 39a169b62b415390398291080dafe63aec751e0a upstream.

get_disk(),get_gendisk() calls have non explicit side effect: they
increase the reference on the disk owner module.

The following is the correct sequence how to get a disk reference and
to put it:

    disk = get_gendisk(...);

    /* use disk */

    owner = disk->fops->owner;
    put_disk(disk);
    module_put(owner);

fs/block_dev.c is aware of this required module_put() call, but f.e.
blkg_conf_finish(), which is located in block/blk-cgroup.c, does not put
a module reference.  To see a leakage in action cgroups throttle config
can be used.  In the following script I'm removing throttle for /dev/ram0
(actually this is NOP, because throttle was never set for this device):

    # lsmod | grep brd
    brd                     5175  0
    # i=100; while [ $i -gt 0 ]; do echo "1:0 0" > \
        /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device; i=$(($i - 1)); \
    done
    # lsmod | grep brd
    brd                     5175  100

Now brd module has 100 references.

The issue is fixed by calling module_put() just right away put_disk().

Signed-off-by: Roman Pen <roman.penyaev@...fitbricks.com>
Cc: Gi-Oh Kim <gi-oh.kim@...fitbricks.com>
Cc: Tejun Heo <tj@...nel.org>
Cc: Jens Axboe <axboe@...nel.dk>
Cc: linux-block@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Jens Axboe <axboe@...com>
Cc: Sumit Semwal <sumit.semwal@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 block/blk-cgroup.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -788,6 +788,7 @@ int blkg_conf_prep(struct blkcg *blkcg,
 {
 	struct gendisk *disk;
 	struct blkcg_gq *blkg;
+	struct module *owner;
 	unsigned int major, minor;
 	int key_len, part, ret;
 	char *body;
@@ -804,7 +805,9 @@ int blkg_conf_prep(struct blkcg *blkcg,
 	if (!disk)
 		return -ENODEV;
 	if (part) {
+		owner = disk->fops->owner;
 		put_disk(disk);
+		module_put(owner);
 		return -ENODEV;
 	}
 
@@ -820,7 +823,9 @@ int blkg_conf_prep(struct blkcg *blkcg,
 		ret = PTR_ERR(blkg);
 		rcu_read_unlock();
 		spin_unlock_irq(disk->queue->queue_lock);
+		owner = disk->fops->owner;
 		put_disk(disk);
+		module_put(owner);
 		/*
 		 * If queue was bypassing, we should retry.  Do so after a
 		 * short msleep().  It isn't strictly necessary but queue
@@ -851,9 +856,13 @@ EXPORT_SYMBOL_GPL(blkg_conf_prep);
 void blkg_conf_finish(struct blkg_conf_ctx *ctx)
 	__releases(ctx->disk->queue->queue_lock) __releases(rcu)
 {
+	struct module *owner;
+
 	spin_unlock_irq(ctx->disk->queue->queue_lock);
 	rcu_read_unlock();
+	owner = ctx->disk->fops->owner;
 	put_disk(ctx->disk);
+	module_put(owner);
 }
 EXPORT_SYMBOL_GPL(blkg_conf_finish);